Page 2 - Before Initial Use; Accessories; For Australia; For your future reference; For Australia only
Before Initial Use 2 Thank you for purchasing your new Panasonic cordlesstelephone. Accessories (included) ∑ AC Adaptor (p. 10) one ∑ Telephone Line Cord (p. 10) For Australia For New Zealand one For your future reference Serial No. Date of purchase (found on the bottom of the unit) Name and address...
Page 3 - For Best Performance; Battery Charge
For Best Performance 3 Battery Charge A rechargeable Ni-Cd battery powers thehandset. Charge the battery for about 6 hoursbefore initial use (p. 11). Clean the handset and the base unit chargecontacts with a soft, dry cloth once a month.Clean more often if the unit is subject togrease, dust or high ...
Page 4 - Contents; Preparation
Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connections . ...
Page 6 - Location of Controls; Handset
Location of Controls 6 Handset TALK DIRECT FWD/EDIT BACK FUNCTION/EXIT 1 2 ABC 3 DEF 5 JKL 6 MNO 4 GHI 8 TUV 0 9 WXYZ 7 PQRS REDIAL PAUSE CLEAR ON OFF LOUD/ SEARCH CH RECALL Antenna (TALK) Button (p. 17, 19) (CLEAR) Button (p. 18, 29, 41) Navigator Key ( (‹) , (›) , BACK (fi) , FWD/EDIT (fl) ) (p. 1...
Page 8 - Display; To go to the directory list, press FWD/EDIT
Display 8 The handset shows you instructions and information on the display. These display prompts are shown below. The Caller List is empty or there are no storeditems in the directory. The battery needs to be charged. Place thehandset on the base unit to charge the battery(p. 11). The display show...
Page 10 - Settings; Connections; OR
Settings 10 Connections To Power Outlet(AC 230 V–240 V, 50 Hz) AC Adaptor Raise the antenna. Fasten the cords to preventthem from being disconnected. Hooks Telephone Line Cord To Socket Telephone Plug OR For New Zealand To Single-Line Telephone Jack For Australia Telephone Line Cord ≥ USE ONLY WITH ...
Page 11 - Display prompt; Installing the Battery in the Handset
“ 11 Preparation Battery Charge Place the handset on the base unitand charge for about 6 hoursbefore initial use. ≥ The IN USE/CHARGE indicator lights. IN USE/CHARGE Indicator OR Battery strength You can check the battery strength on the display while the handset is onthe base unit, while it is in u...
Page 12 - Battery information; Operation; Recharge
“ Settings 12 Battery information After your Panasonic battery is fully charged (p. 11): *Within about 3 m ≥ Battery life may be shortened depending on usage conditions, such as viewingthe Caller ID Caller List or directory list, and ambient temperature. ≥ Clean the handset and the base unit charge ...
Page 13 - Selecting the Line Mode; Make sure the handset is in the standby mode.
13 Preparation Selecting the Line Mode If the line is connected to a low voltage system such as a PBX, set to “B”.Otherwise the unit may not ring and a second caller’s information may notbe displayed (p. 43). Your phone comes from the factory set to “A”. Make sure the handset is in the standby mode....
Page 14 - Programmable Functions
Programmable Functions 14 You can program the following function items using the handset nearthe base unit. The display shows the programming instructions. See thecorresponding pages for function details.Make sure the handset is in the standby mode. During programming*To select a desired function it...
Page 15 - Setting the Auto Talk Feature
“ 15 Preparation Setting the Auto Talk Feature The Auto Talk feature allows you to answer a call by lifting the handset offthe base unit without pressing (TALK) . If you want to use this feature, turn the feature ON by programming. Your phone comes from the factory setto OFF.Make sure the handset is...
Page 16 - Selecting the Ringer Volume; To turn the ringer ON, press
“ Programmable Functions 16 Selecting the Ringer Volume You can program the ringer volume to HIGH, LOW or OFF. If set to OFF,the unit will not ring. Your phone comes from the factory set to HIGH.Make sure the handset is in the standby mode. 1 Press (FUNCTION/EXIT/CH) . 2 Press (›) or (‹) repeatedly ...
Page 17 - Making Calls; Basic Operation; If noise interferes with the conversation
Making Calls “ 17 Basic Operation 1 Press (TALK) . 2 Dial a phone number. ≥ The dialled number is displayed. ≥ After a few seconds, the display will show thelength of the call and the battery strength. 3 To hang up, press (TALK) or place the handset on the base unit. If noise interferes with the con...
Page 18 - Making calls; To dial after confirming the entered number; To redial after confirming the last number dialled
“ Making calls 18 To dial after confirming the entered number 1 Dial a phone number. ≥ If you misdial, press (CLEAR) . All digits are erased. Dial the correct phone number. 2 Press (TALK) . ≥ After a few seconds, the display will show thelength of the call and the battery strength. 3 To hang up, pre...
Page 19 - Answering Calls; Auto Talk; Backlit LCD display
Answering Calls 19 Basic Operation When a call is received, the unit rings and the CALLER ID indicator onthe base unit flashes quickly. If you subscribe to a Caller ID service, thecalling party information will be displayed after the first ring (p. 20). Inorder to view the Caller ID information, ple...
Page 20 - Caller ID Service; TINA ROBINSON; *Private name display
Caller ID Service 20 This unit is compatible with a Caller ID service offered by your telephonecompany. If you subscribe to a Caller ID service, the calling party’sinformation will be displayed after the first ring. The unit can record information of up to 50 different callers, including thetime and...
Page 21 - While the handset is on the base unit:
21 Advanced Operation To check the number of new calls When new calls have been received, the CALLER ID indicator flashesslowly on the base unit. ≥ Caller information cannot be displayed in the following cases: ≥ —If the caller dialled from an area which does not provide a Caller ID service, the dis...
Page 22 - Using the Caller List; Viewing the Caller List
Using the Caller List 22 Viewing the Caller List To check who has called, follow the steps below.Make sure the handset is in the standby mode. 1 Lift the handset off the base unitand press (›) or (‹) to enter the Caller List. ≥ The display will show, for example,the following: 2 To search from the m...
Page 23 - To exit the Caller List, press
“ 23 Advanced Operation Ex. When you search from the most recent call: Lift the handset off the base unit and press (›) or (‹) . To return to the previous caller,press (‹) . To exit the Caller List, press (FUNCTION/EXIT/CH) . ≥ The handset will return to the standbymode. Display meaning: √ : You hav...
Page 24 - Calling Back from the Caller List
“ Using the Caller List 24 Calling Back from the Caller List 1 Lift the handset off the base unit and press (›) or (‹) to enter the Caller List. 2 Press (›) or (‹) repeatedly to find the desired caller. 3 Press (TALK) . ≥ The displayed phone number is dialledautomatically. 035556667711:20A JAN.12 a ...
Page 25 - Advanced Operation
“ 25 Advanced Operation For New Zealand Users:Your telephone service provider may charge you for a local callwhen it is dialled with an area code prefix. If the charge for local callis unacceptable, only the 7-digits of the local number should bedialled from your telephone. Do not dial the “0” prefi...
Page 26 - Editing the Caller’s Phone Number
“ Using the Caller List 26 Editing the Caller’s Phone Number The unit can edit a phone number into one of 3 patterns.Make sure the handset is in the standby mode. 1 Lift the handset off the base unit andpress (›) or (‹) to enter the Caller List. 2 Press (›) or (‹) repeatedly to find the desired call...
Page 29 - To erase a specific caller from the Caller List; Erasing Caller List Information
To erase a specific caller from the Caller List 1 Lift the handset off the base unit andpress (›) or (‹) to enter the Caller List. 2 Press (›) or (‹) repeatedly to find the caller you want to erase from the CallerList. 3 Press (CLEAR) . ≥ A beep sounds and the information iserased. ≥ To erase other ...
Page 30 - To erase all entries in the Caller List
“ Using the Caller List 30 To erase all entries in the Caller List Before erasing all entries, make sure that “ 0 new call ” is displayed. 1 Lift the handset off the base unit andpress (›) or (‹) to enter the Caller List. 2 Press (CLEAR) . 3 Press (›) or (‹) to select “ All clear ”. 4 Press FWD/EDIT...
Page 33 - Using the Directory
33 Advanced Operation Using the Directory “ You can store up to 50 names and phone numbers in the directory. Alldirectory items are sorted by the first word in alphabetical order.Using the directory, you can make a call by selecting a name on thehandset display.When you receive a Caller ID call from...
Page 36 - Number of times key is pressed; Steps for Entering Names and Symbols; If you make a mistake while entering a name; Keys
(1) (2) (3) (4) (5) (6) (7) (8) (9) (0) BACK (fi) FWD/EDIT (fl) 1 2 3 4 5 6 7 8 9 10 11 Number of times key is pressed “ Using the Directory 36 Steps for Entering Names and Symbols The handset dialling buttons ( (0) to (9) ), BACK (fi) and FWD/EDIT (fl) can be used to enter letters and symbols.Each ...
Page 38 - Finding Items in the Directory
“ Using the Directory 38 Finding Items in the Directory Make sure the handset is in the standby mode. 1 Press BACK (fi) or FWD/EDIT (fl) to enter the directory list. 2 Press (›) or (‹) . ≥ The first item is displayed. 3 Press (›) or (‹) repeatedly until the desired item is displayed. ≥ All directory...
Page 39 - Dialling from the Directory; Index; Index Table
“ 39 Advanced Operation Dialling from the Directory 1 Press BACK (fi) or FWD/EDIT (fl) to enter the directory list. 2 Press (›) or (‹) . ≥ The first item is displayed. 3 Press (›) or (‹) repeatedly to find the directory item that you want to dial (p. 38). 4 Press (TALK) . ≥ The number is dialled aut...
Page 40 - Editing an Item in the Directory
Editing an Item in the Directory Make sure the handset is in the standby mode. 1 Press BACK (fi) or FWD/EDIT (fl) to enter the directory list. 2 Press (›) or (‹) . ≥ The first item is displayed. 3 Press (›) or (‹) repeatedly to find the directory item you want to change (p. 38).Press FWD/EDIT (fl) ....
Page 41 - Erasing an Item from the Directory
41 Advanced Operation Erasing an Item from the Directory Make sure the handset is in the standby mode. 1 Press BACK (fi) or FWD/EDIT (fl) to enter the directory list. 2 Press (›) or (‹) . ≥ The first item is displayed. 3 Press (›) or (‹) repeatedly to find the directory item you want to erase (p. 38...
Page 42 - Special Features; Automatic Security Code Setting
Special Features Automatic Security Code Setting Each time you place the handset on the base unit, the unit automaticallyselects one of more than a million security codes. These codes helpprevent the unauthorized use of your telephone line by another cordlesstelephone user. Handset Locator You can l...
Page 43 - How to Use the PAUSE Button; Call Waiting and Caller ID Compatible; For Call Waiting Service Users in New Zealand
43 Advanced Operation “ How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) We recommend you press (REDIAL/PAUSE) if a pause is required for dialling with a PBX or to access a long distance service.Ex. Line access number (9) (PBX) (9) ¤ (REDIAL/PAUSE) ¤ ≥ Pressing (REDIAL/P...
Page 44 - Selecting the recall time; RECALL Button
44 “ Special Features Selecting the recall time The recall time depends on your telephone exchange or host PBX. You can select the following recall times: “700, 600, 400, 300, 250, 110,100 or 90 msec (milliseconds)”. KX-TC1851ALB comes from the factoryset to “100 msec” and KX-TC1851NZB comes set to ...
Page 46 - Wall Mounting; Wall Template
46 Wall Mounting This unit can be mounted on a wall. 1 Set the handset holder as shown. 3 Tuck the telephone line cord insidethe wall mounting adaptor, thenpush it in the direction of the arrow. ≥ The word “UP” should face upward. Wall Template 8.5 cm 2 Connect the AC adaptor. To Power Outlet
Page 47 - To remove the handset holder
47 Useful Information 2 1 OR To Telephone Plug and Socket 8.5 cm Screws For Australia To Single-Line Telephone Jack For New Zealand OR 4 Install screws using the wall template (see p. 46). Connect the telephoneline cord. Mount the unit, thenslide down. ≥ Raise the antenna. 5 To charge the battery:Pl...
Page 48 - To attach the belt clip
Using the Optional Headset Using the Belt Clip 48 You can hang the handset on your belt or pocket using the belt clip. To attach the belt clip To remove the belt clip Plugging an optional headset into the handset allows a hands-free phoneconversation. Please use only the Panasonic KX-TCA87AL headset...
Page 49 - Useful Information; Battery Replacement
49 Useful Information If “ Recharge battery ” is displayed and/or “ ” flashes after being fully charged, replace the battery with a new Panasonic P-P508 battery.To prevent memory loss, replace within 3 minutes. 1 Press the notch on the batterycover firmly and slide it asindicated by the arrow. 2 Rep...
Page 50 - Adding Another Phone
50 Standard Telephone Telephone Line Cord To Socket (Optional) TelephoneDouble Adaptor This unit will not function during a power failure. To connect a standardtelephone on the same line, use a telephone double adaptor. Adding Another Phone Standard Telephone Telephone Line Cord T-Adaptor To Single-...
Page 51 - Before Requesting Help; Problem; Cause and Remedy
51 Useful Information Before Requesting Help “ Problem “ No link to base. Place on cradle and try again. ” is displayed and an alarm tone sounds. The unit does not work. Static, sound cuts in/out,fades. Interference fromother electrical units. The handset does not ring. The handset display isblank. ...
Page 55 - Safety Instructions
Safety Instructions “ 55 Useful Information Take special care to follow the safety suggestions listed below. Safety1) The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 2) When left unused for a long period of time, the b...
Page 57 - For New Zealand Users Only
57 Useful Information For New Zealand Users Only The grant of a Telepermit for any item of terminal equipmentindicates only that Telecom has accepted that the item complieswith minimum conditions for connection to its network. It indicatesno endorsement of the product by Telecom, nor does it provide...
Page 58 - Important Information; Instructions to customer
Important Information (For Australia only) 58 Instructions to customer InstallationAttached to this apparatus is an approval label. This label is evidence thatit is a “Permitted Attachment” which has been authorised to be connectedto your telephone service. Conditions relating to connection and oper...
