Panasonic EB-GD52 - Manual

Fitting the Battery Fit a fully charged battery pack. If thebattery pack is not fully charged then itmust be charged as described in the“Charging the Battery” section. First, remove the battery cover bypressing where indicated and slidingthe cover downwards (1). Ensure thatthe battery locking mechan...

Operation of Battery Level Indicator While charging Charging complete Telephone on K H Telephone off K Indicator off When charging is complete remove the AC Adaptor. Disconnecting the AC Adaptor Disconnect the AC Adaptor from themains power supply (1). Squeeze together the two buttons onthe plug of ...

g Navigation key – pressing up/down/left/right scrolls through options in themain area of the display. Pressing left/right scrolls through options in theoption area of the display B Select key – selects an option in the option area of the display A accesses Phonebook or switches character types P pr...

Basic Operation Switching the Phone On/Off To switch the phone on or off. Press and hold E to switch power on A greeting animation will be displayed and then the phone willgo into Idle mode. Press and hold E to switch power off Making a Call Ensure that the phone is switched on, the network operator...

Automatic Redial When a call is unsuccessful the phone may ask if you want toredial the phone number again automatically. Press B when Ok is displayed in the option area and the display will countdown in seconds to the next redial. To stop redialling, press B when Cancel is displayed in the option a...

Locking the Phone With the Phone Lock enabled you will be restricted to answer incoming calls andmake emergency calls only. The Phone Lock Code is factory set to “0000”. 1 From Idle mode press B 81 to enter the Phone Lock menu 2 Enter the 4-digit code and press B The phone will be locked and the loc...

Phonebook Phone numbers can be stored in two locations. You can store numbers in the SIMPhonebook (therefore the number of locations, length of name and number of phonenumbers are SIM dependant). Alternatively you can store phone numbers in theMobile Phonebook, this means that if you change the SIM ...

Browsing Phonebook You can search the Phonebook by either Name or Location. The default setting forbrowsing is by name. When browsing by name pressing a lettered key will take you tothe first entry starting with that letter. 1 From Idle mode press B 2 to enter the Phonebook menu 2 Use f to toggle be...

Recall Displays the phone number, enabling you to either change it or call the number. Edit Displays the entry allowing you to make changes as required. Press B to save any changes. Delete Deletes the entry from the Phonebook. Create Creates a new entry in the Phonebook Grouping Phonebook Entries Th...

Personal Dial The P key can be defined to recall your favourite phone number in preparation for initiating a call. Setting the Personal Dial Number 1 From Idle mode press B 27 to enter the Personal Dial menu 2 Enter the name - see “Text Entry” page 36, and press a 3 Enter the phone number and press ...

Personalising Your Phone Add a Start-up Greeting A personalised greeting can be programmed for when the phone is switched on. 1 From Idle mode press B 531 to enter the Greeting menu 2 Use the text entry facility to add your greeting and press B - see “Text Entry” page 36 Displaying Animations Animat...

Phone Security The phone features a number of security functions that protect against unauthorizeduse, and enable you to restrict access to certain features - see “Using the PIN” page8. It is recommended that you memorize your security codes. If you need to make anote of your security codes, never w...

Restricting Calls Call Barring The Call Bar function is used to restrict certain outgoing and/or incoming calls. CallBar is controlled by a security password that is supplied by your Service Provider.When updating or checking the status of Call Bar the phone must be registered with anetwork. Differe...

Applications Clock This phone incorporates a clock with date/time, an alarm and a power on/off feature. Initially Setting the Home Time 1 From Idle mode press B 411 to enter the Clock Set menu and press B 2 Enter the digits for the date in the format day/month/yearand press B 3 Enter the digits for ...

Muting the Alarm When the set time is reached the alarm will sound and the display will flash with analarm message. The alarm will sound for 30 seconds. If the alarm is due during a call,it will activate vibration alert. To end the alarm: Press any key Disabling the Alarm 1 From Idle mode press B 41...

Calculator The four function calculator will enable you to perform simple arithmetic calculations(addition/subtraction/multiplication and division). 1 From Idle mode press B 42 to enter the Calculator menu 2 Enter a number (maximum 10 digits) and it will be displayed on the lower line 3 Use g to sel...

Swapping the Currency Conversion When you have accepted the conversion rate and are ready to enter the value to beconverted, you can swap the currencies to convert from the foreign currency into thehome currency. 1 Use f until Swap is displayed in the option area and press B 2 Enter the value for co...

Short Text Messages You can receive, display, edit and/or send short text messages, of up to 160characters to mobile phones on the same network or any network that has a roamingagreement. Setting the Phone for Text Messages Before you can send a message you must enter the Message Centre number intoP...

Receiving Text Messages When a Short Text Message is sent to your phone the message indicator ( N ) will blink in the display, with an audible tone or vibration. This indicates that a newmessage has been received. When Read is displayed in the option area press B to read the message. Use g to naviga...

User Defined Message Creating a User Defined Message It is possible to create a user defined message which, once generated, can be usedas any other pre-defined message. From Idle mode press B 34 . Edit the message as required and press B . Selecting the User Defined Message From Idle mode press B 33...

Message Parameters From Idle mode press B 36 to enter the Parameters menu. The following parameters can be set: Auto Delete When set will erase messages automatically: Received Read - will overwrite the oldest read message Received Any - will overwrite the oldest message even though it may not have ...

Enabling/Disabling Broadcasts 1 From Idle mode press B 371 to enter the Receive menu 2 Press B Once enabled, following the same procedure will disable broadcasts. Message List This is a store for the last received broadcast messages. Messages can be deletedfrom here. Language The Language in which b...

Call Information Recent Numbers Recently dialled phone numbers will be stored in Last Dialled. If Caller Identification is available the caller’s phone number for an answered call willbe stored in Answered and an unanswered call will be stored in Unanswered. If Caller Identification is not available...

Call Charges To maintain control over the cost of calls that are made, the phone can be set torestrict use to a finite number of units overall. Setting the Unit Price Firstly, a price per unit must be entered. This is the cost that the Service Providercharges for one unit of call time. 1 From Idle m...

Advanced Operation Diverting Calls Voice, fax and data calls can be diverted using different circumstances and todifferent numbers. For example you may wish voice calls to be diverted to Voicemailin the event that the phone is switched off. 1 From Idle mode press B 7 to enter the Call Divert menu 2 ...

End Current Call and Receive Second Call 1 Press E with a waiting call 2 Press any key except E or g Operation During Two Calls Swapping Between Calls The ! prompt indicates the current call Press B when Swap is displayed in the option area End Current Call 1 Press f to display End in the option are...

Adding to Multi-party You can add to the Multi-party call (up to a maximum of five). Either by making a callor accepting an incoming call. The call can then be merged into the Multi-party. Note: When making a call or accepting an incoming call the Multi-party call will beplaced on hold. The callers ...

Changing to a New Network When not in your home country you may use a network that you do not directlysubscribe to, this is called ROAMING. National Law may not permit roaming in yourhome country. The New Network function is used to manually select a network that is available inyour current location...

Additional Features Desktop Handsfree Desktop Handsfree enables you to hold a conversation without having to hold thephone to your ear. Note: Do NOT hold the phone to your ear in Handsfree mode. Swapping Between Handsfree and Handheld Calls During a Handheld call: 1 Use f to until H’free is displaye...

Text Entry The phone provides a means for entering alphanumeric characters to enter detailsinto the Phonebook, to create text and e-mail messages etc. This section details thecharacters that can be entered and the relevant keys to press. * Press * once to enter a single capital letter (subsequent ch...

Calls cannot bemade from FixedDial Store Check your SIM supports FixedDialCheck if the Fixed Dial is switchedonCheck the phone number is storedin the Fixed Dial Calls cannot bereceived The phone is notswitched on Switch the phone on Incoming calls arebarred Disable the incoming call barring The phon...

Important Information Safety Considerations The following information should be read and understood as it provides details whichwill enable you to operate your phone in a manner which is both safe to you and yourenvironment, and conforms to any legal requirements regarding the use of cellularphones....

Specifications Telephone Type GSM900 Class 4GSM1800 Class 1 Temperature range ChargingStorage +5°C to +35°C-20°C to +60°C Battery – Attached to phone Battery Pack (S) Weight 99g Dimensions Height x Width x Depth 118.0 x 40.6 x 21.7mm Supply Voltage 3.6V DC, 600mAh Ni-MH Standby Time - Idle Mode (h)T...