Page 2 - Operating Instructions
2 Operating Instructions The following Operating Instruction manuals are included with this machine. Please refer to the appropriate manual and keep all manuals for future reference. If you lose the manual, contact the authorized Panasonic dealer. Accessories Operating Instructions (For Setting Up) ...
Page 3 - Conventions; Icons; The following icons are used in this manual.; Notation; The following notations are used in this manual.
3 Conventions Icons The following icons are used in this manual. Notation The following notations are used in this manual. Icon Description Indicates important information that must be read in detail. Indicates reference Information. Notation Description For Keys and Buttons Hard buttons on the Cont...
Page 4 - Table of Contents; Chapter 1 Basic Menu Features
4 Table of Contents Chapter 1 Basic Menu Features Basic Operation Procedure ................................................................................................. 6 Selecting the Color Mode ......................................................................................................
Page 6 - Chapter 1 Basic Menu Features; Basic Operation Procedure; Press the; Copy; key if the machine is; Basic Menu Features
6 Chapter 1 Basic Menu Features Chapter 1 Basic Menu Features Basic Operation Procedure The machine automatically detects the original(s) and decides on which Copy Size, Black & White, or Color Copy Mode to use. If the detection fails, manually set the settings. 1 Place original(s). z Refer to P...
Page 7 - Start; Reset
7 Chapter 1 Basic Menu Features 4 Enter the desired number of copies.(Up to 999) z When inputting a number 4 to 8 digits in length, with the optional Fax Communication Board installed, the machine interprets this as a telephone number, and switches to Fax Mode and displays the Number Pad screen. 5 P...
Page 8 - Selecting the Color Mode; Black
8 Chapter 1 Basic Menu Features Selecting the Color Mode You can either copy in the machine selected color mode, or you can manually change it. z The default color mode settings can be changed. Refer to Copier Settings (For Key Operator) in the Operating Instructions (For Function Parameters) on the...
Page 9 - Full Color Mode; Color original can be copied in Full Color.; Full Color; Black Mode
9 Chapter 1 Basic Menu Features Full Color Mode Color original can be copied in Full Color. 1 Select “ Full Color ”, and then select “ OK ”. z To display this screen, refer to steps 1 to 3 of Selecting the Color Mode (see page 8). z For the following procedure, refer to steps 5 to 6 of Selecting the...
Page 10 - Color Mode; Color; Change Color; When selecting a color from the basic colors.; New
10 Chapter 1 Basic Menu Features 2 Color Mode Color original can be copied in 2 Colors, which can be achieved by using Black & another specified color. The specified color can be selected from the basic colors (Red, Green, Blue, Yellow, Magenta, Cyan) and registered colors. When 2 Color Mode is ...
Page 11 - OK
11 Chapter 1 Basic Menu Features 4 Select “ OK ”. Ex : “ Green ” is selected. z For the following procedure, refer to steps 5 to 6 of Selecting the Color Mode (see page 8).
Page 12 - Color Mode; Color; New Color Registration
12 Chapter 1 Basic Menu Features 1 Color Mode Color and Monochrome originals can be copied in one specified color. The color can be selected from the basic colors (Red, Green, Blue, Yellow, Magenta, Cyan), or from the registered colors. z When 1 Color Mode is selected, Original Type setting selectio...
Page 14 - Add Custom; When the registered color is changed.
14 Chapter 1 Basic Menu Features New Color Registration 1 Select “ Add Custom ”. z To display this screen, refer to steps 1 to 2 of 2 Color Mode (see page 10). 2 Select any button without a registered color name, and then select “ OK ”. When the registered color is changed. Select the registered c...
Page 15 - Using the Keyboard
15 Chapter 1 Basic Menu Features 5 Input the original color name with the keyboard, and then select “ OK ”. z Up to 20 characters. z For instructions on how to enter characters, refer to Using the Keyboard in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 6 Confirm the ...
Page 16 - Select the original type corresponding to your documents.; Original Type
16 Chapter 1 Basic Menu Features Selecting Original Type and Adjusting the Density Select the original type corresponding to your documents. Adjust the copy density according to your requirements. z Original Type setting selection is not available when the 2 Color, or 1 Color mode is chosen. z To ch...
Page 17 - Adjust the density using “; Lighter; ” or; Darker; Enter the desired number of copies.
17 Chapter 1 Basic Menu Features 5 Adjust the density using “ Lighter ” or “ Darker ”, and then select “ OK ”. 6 Enter the desired number of copies. 7 Press the Start key. z After finishing copying, press the Reset key to return to the initial screen of the current active mode. Text Select when copy...
Page 18 - Registering Quality Preset; The following quality adjustment settings can be registered:; More Settings; Using Quality Preset
18 Chapter 1 Basic Menu Features Registering Quality Preset Save your favorite Quality Adj. setting configuration, by registering up to 5 Quality Presets. The following quality adjustment settings can be registered: • Auto, Black, Full Color, 2 Color or 1 Color• Original Type• Density More Settings ...
Page 19 - When registering a new Quality Preset.
19 Chapter 1 Basic Menu Features 6 Select a Quality Preset button, and then select “ OK ”. When registering a new Quality Preset. Select an empty Quality Preset button. When updating a registered Quality Preset. Select the registered Quality Preset button. 7 Enter any Quality Preset name, and th...
Page 20 - Registering
20 Chapter 1 Basic Menu Features Using Quality Preset You can recall the registered quality adjustment configuration settings by using the following procedures. For details on how to register image quality adjustment settings into Quality Preset, refer to the Registering Quality Preset (see page 18)...
Page 21 - Memo
Page 22 - Quality Adjusting
22 Chapter 1 Basic Menu Features Quality Adjusting Image quality items can be easily set by selecting from 4 image quality types (Lively, Bright, Warmer, and Cooler). Additionally, within Custom Setting selection, the following 7 image quality adjustments can be set. • Background Removal • BleedThro...
Page 23 - Copier Settings
23 Chapter 1 Basic Menu Features z The default values are set upon shipment. Key operations can change these values, refer to Copier Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 6 Select “ OK ”. 7 Enter the desired number of copies. 8 Press the Start key. ...
Page 24 - Off; Custom Setting; Background Removal; ” and “
24 Chapter 1 Basic Menu Features Background Removal The original can be copied with the background color removed. This function is useful when copying newspapers or an original, which has background color. z The settings of the Background Removal changes to “ Off ” if Photo is selected in the Origin...
Page 25 - Thin sheets of original can be copied without bleeding through.; BleedThrough Prevention; Tracing Paper
25 Chapter 1 Basic Menu Features BleedThrough Prevention Thin sheets of original can be copied without bleeding through. z The settings of BleedThrough Prevention become invalid if Photo is selected in the Original Type. z When setting the Tint adjustment to More Blue or More Red, the copies may com...
Page 26 - Tint; Adjust the color tone with “; More Red; More Blue
26 Chapter 1 Basic Menu Features Tint The original can be copied with reddish or bluish color accentuated. 1 Select “ Tint ”. z To display this screen, refer to step 1 of Background Removal (see page 24). 2 Adjust the color tone with “ More Red ” or “ More Blue ”, and then select “ OK ”. z Screen wi...
Page 27 - The original can be copied with adjusted contrast.; Contrast; Adjust the contrast with “; Lower
27 Chapter 1 Basic Menu Features Contrast The original can be copied with adjusted contrast. 1 Select “ Contrast ”. z To display this screen, refer to step 1 of Background Removal (see page 24). 2 Adjust the contrast with “ Lower ” or “ Higher ”, and then select “ OK ”. z Screen will return to step ...
Page 28 - Sharpness; Adjust the sharpness with “
28 Chapter 1 Basic Menu Features Sharpness The original can be copied by softening, or sharpening the outline of the image. 1 Select “ Sharpness ”. z To display this screen, refer to step 1 of Background Removal (see page 24). 2 Adjust the sharpness with “ Lower ” or “ Higher ”, and then select “ OK...
Page 29 - The original can be copied with adjusted saturation.; Saturation; Adjust the saturation with “
29 Chapter 1 Basic Menu Features Saturation The original can be copied with adjusted saturation. 1 Select “ Saturation ”. z To display this screen, refer to step 1 of Background Removal (see page 24). 2 Adjust the saturation with “ Lower ” or “ Higher ”, and then select “ OK ”. z Screen will return ...
Page 30 - Color Balance; Cyan; ”, and then adjust Darker
30 Chapter 1 Basic Menu Features Color Balance The original can be copied with adjusted density level (Darker, Medium, and Lighter) of Yellow, Magenta, Cyan, and Black. z The density of each color can be fine tuned for each of the three density levels.This function is useful for the fine adjustment ...
Page 32 - Proof Copying; If the copy quality is not satisfactory.
32 Chapter 1 Basic Menu Features Proof Copying When making more than one copy, the first copy can be printed as a proof copy.After confirming its quality, the remaining copies can be printed. 1 Place original(s). z Refer to Placing Originals (Copy) in the Operating Instructions (For Basic Operations...
Page 33 - Before copying, the settings can be checked, changed or deleted.; Confirm Settings
33 Chapter 1 Basic Menu Features Confir ming/Editing the Selected Copy Features Before copying, the settings can be checked, changed or deleted. 1 Select “ Confirm Settings ”. 2 Check the settings, and then select “ Close ”. z If “ Confirm Settings ” is selected, the setting screen is displayed and ...
Page 34 - Storing a Job in Memor y; Recalling a Preset Job Stored in Memory
34 Chapter 1 Basic Menu Features Storing a Job in Memor y A copy job can be registered as a preset job. It is useful to register the frequently used settings as Preset jobs. z Refer to the Recalling a Preset Job Stored in Memory (see page 35). z Once registered, the copy job settings are kept in the...
Page 35 - Recalling a Preset Job Stored in Memor y; A job called “Double Exposure” is set as default.; Double Exposure; Storing a Job in Memory; Preset Jobs; Close
35 Chapter 1 Basic Menu Features Recalling a Preset Job Stored in Memor y The specific copy job will be done by recalling the registered preset jobs. A job called “Double Exposure” is set as default. Refer to Double Exposure in the Operating Instructions (For Basic Operations) of provided booklet. z...
Page 36 - Checking the Waiting to Copy Job; • All jobs; Displaying a List of All Jobs; Displaying a List of Copy Jobs
36 Chapter 1 Basic Menu Features Checking the Waiting to Copy Job A list of jobs currently being printed or waiting to print can be displayed. The following types of jobs can be displayed. • All jobs • Copy jobs The pending waiting to print jobs can be deleted. Displaying a List of All Jobs A list o...
Page 37 - Deleting Copy Jobs; The jobs in Ready status can be deleted.; ” in the Output Queue; Select a job, and then select “; Delete; Select; Yes
37 Chapter 1 Basic Menu Features Deleting Copy Jobs The jobs in Ready status can be deleted. 1 Select “ Copy ” in the Output Queue screen. z To display the Output Queue screen, refer to the Checking the Waiting to Copy Job (see page 36). 2 Select a job, and then select “ Delete ”. z When deleting al...
Page 38 - Completion Notice; Panasonic Document Management System
38 Chapter 1 Basic Menu Features Completion Notice If Completion Notice is set, you will be notified on your computer when copying is completed. z Before using this function, install the Panasonic Document Management System and PCL Printer Driver , and then configure each software. z To register the...
Page 40 - Chapter 2 More Menus Features; Basic Operation for the 2-Sided Copy Mode
40 Chapter 2 More Menus Features Chapter 2 More Menus Features 2-Sided Copy Mode z For information on “ 1 -> 2 ”, “ 2 -> 2 ”, “ Book -> 2 ”, and “ N in 1 ”, please refer to the Operating Instructions (For Basic Operations) on the provided booklet. z The standard setting of the “ 2-Sided / O...
Page 41 - Basic Operation for the 2-Sided
41 Chapter 2 More Menus Features Copying 2-Sided original(s) onto two separate sheets 2-Sided original(s) can be copied and separated into 1-Sided pages. 1 Select “ 2-Sided / Original->Copy ”, and then select “ 2 -> 1 ”. z To display this screen, refer to steps 1 to 3 of Basic Operation for th...
Page 42 - Copying Facing Page Original to Two Separate Sheets; Page; Select a page order of original.
42 Chapter 2 More Menus Features Copying Facing Page Original to Two Separate Sheets Two facing pages or a 11" x 17" size original can be copied and separated into 1-Sided sheets. 1 Select “ 2-Sided / Original->Copy ”, and then select “ 2 Page ”. z To display this screen, refer to steps 1...
Page 43 - Booklet; Select a bind position.; Cover
43 Chapter 2 More Menus Features From 1-Sided Originals to 2-Sided Copies using Saddle Stitch (Booklet) z The 2-Sided original cannot be copied into a booklet. z Originals should be placed on the ADF. (5.5" x 8.5" or 8.5" x 11" size is only available, up to 40 originals) z Saddle sti...
Page 44 - ” to exit the cover settings.
44 Chapter 2 More Menus Features 2 Select a cover type. z When “ Blank ” is selected as the cover type, up to 36 originals can be placed on the ADF. 3 Select “ Cover ” to select a paper. z When changing paper other than the cover, select the Copy key on the Control Panel. If the paper of desired siz...
Page 45 - Copying Mixed Size Originals from the ADF
45 Chapter 2 More Menus Features Copying Mixed Size Originals from the ADF Use this function when copying mixed size originals (8.5" x 11" and 11" x 17", or 5.5" x 8.5", 8.5" x 11"-R, and 8.5" x 14" (Legal)) using the ADF, original size can be detected automat...
Page 46 - Basic Menu; ”, and then select a
46 Chapter 2 More Menus Features 3 When copying the same paper size, touch “ Basic Menu ”, and then select a desired copy size with copy size button. z For the following procedure, refer to steps 5 to 6 of Basic Operation for the 2-Sided Copy Mode (see page 40). When all originals are vertically lon...
Page 47 - SADF
47 Chapter 2 More Menus Features Copying Special Originals (Thin Paper, etc.) from the ADF SADF This mode adds a 5 second delay to allow another original to be placed on the ADF. Special originals (like thin paper, etc.) can be fed from the ADF and copied continuously using the SADF Mode. 1 Place ...
Page 48 - Job Build; ” Copy menu, and then select Job “; Job Build and SADF; ” menu, and then select the desired Sorting/Finishing end result.; ” will display, select “
48 Chapter 2 More Menus Features Job Build This is useful, when copying multiple sets of originals that exceed the maximum capacity of the ADF of 85 sheets (20 lb). (See the Example below:) Ex : To make 5 sets of sorted copies of 100-sheet of originals. (a) Place the first 85 sheets of originals o...
Page 50 - Sor t Mode; • Optional Finisher is not installed.; For 1-Bin Saddle Stitch Finisher; More Menus; Punch
50 Chapter 2 More Menus Features Sor t Mode The original can be copied, printed, and sorted in a specified number of sets. • Optional Finisher is not installed. Refer to the Operating Instructions (For Basic Functions). • Optional Finisher is installed. Shift-Sort, Shift-Group, and Staple mode are a...
Page 52 - Zoom Mode; Variable Ratios
52 Chapter 2 More Menus Features Zoom Mode Variable Ratios The original can be copied by setting the Enlargement/Reduction Ratio. 1 Place original(s). z Refer to Placing Originals (Copy) in the Operating Instructions (For Basic Operations) of provided booklet. 2 Press the Copy key if the machine is ...
Page 53 - Input the zoom ratio with “
53 Chapter 2 More Menus Features 6 Input the zoom ratio with “ S ” and “ T ”, or the keypad, and then select “ OK ”. z The ratio can be set in 1% increments from 25% to 400%. z When changing the paper size after setting the zoom ratio, touch “ Basic Menu ”, select “ Paper/Output Tray ”, and then sel...
Page 54 - Auto Zoom
54 Chapter 2 More Menus Features Auto Zoom By setting Auto Zoom, originals can be automatically Enlarged/Reduced to fit the size of the loaded paper. z This function can be selected when the original is placed on the platen. z As the original is placed on the platen, the position of the original may...
Page 56 - Effect Modes; Setting a Blank Edge; Unnecessary edge can be erased by setting a blank edge.; Zoom
56 Chapter 2 More Menus Features Effect Modes Setting a Blank Edge Unnecessary edge can be erased by setting a blank edge. z When “ Zoom ” is selected, the erasing width varies depending on the zoom ratio. 1 Place original(s). z Refer to Placing Originals (Copy) in the Operating Instructions (For Ba...
Page 58 - Eliminate Dark Inner Binding Shadows
58 Chapter 2 More Menus Features Eliminate Dark Inner Binding Shadows When copying original such as the center of folding position may be shaded. This shade can be easily eliminated. z When “ Zoom ” is selected, the erasing width varies depending on the zoom ratio. z When “ Overlay ” or “ Form Overl...
Page 59 - Overlay; Form Overlay
59 Chapter 2 More Menus Features Shift Image to Right, Left, Up or Down The margin can be added on any 4 sides of the image with the image shifted to the right, left, up, or down accordingly. z If a part of the copied image is missing, change the Margin Reduction setting to Yes. Refer to Copier Sett...
Page 61 - Copying with Stamping; Basic Operation for Stamping; Page Number
61 Chapter 2 More Menus Features Copying with Stamping Page Numbers, Date, etc. can be stamped on each sheet. z This function can be selected when the original is placed on the ADF. z Only 1 of the page number, date, control number, and characters can be selected to print in 1 scanning. 2 or more st...
Page 62 - The original can be copied with page numbers printed.; Sort; Select the orientation of the original.; Change
62 Chapter 2 More Menus Features Page Number The original can be copied with page numbers printed. z The default is -n- (number) format. To change to n/m (number/maximum) format, refer to Copier Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. z Make sure to...
Page 63 - If “; ” was selected in step 4,
63 Chapter 2 More Menus Features 5 If “ Change ” was selected in step 4, select the starting page or number. 6 Only the case of selecting “Change” in step 4, input the starting page number with “ S ” and “ T ”, or the keypad, and then select “OK”. z Starting page number can be set from1 to 999. 7 Se...
Page 64 - Issue Number
64 Chapter 2 More Menus Features Issue Number The original can be copied and printed in consecutive numbers from 001 to 999. z The issue numbers can be set from 001 to 999. After 999, the number returns to 001. 1 Select “ Issue Number ”. z To display this screen, refer to steps 1 to 4 of Basic Ope...
Page 66 - Date
66 Chapter 2 More Menus Features Date The original can be copied with a printed date. The date is printed in MM/DD/YYYY format. 1 Select “ Date ”. z To display this screen, refer to steps 1 to 4 of Basic Operation for Stamping (see page 61). 2 Select the orientation of the original. 3 Select the s...
Page 68 - The original can be copied with printed text.; Text Stamp
68 Chapter 2 More Menus Features Text Stamp The original can be copied with printed text. z Up to 32 characters, including A to Z, a to z, 0 to 9, symbols, @, . (Period), _ and space can be printed. z The font size is 2.1 mm x 3.1 mm. 1 Select “ Text Stamp ”. z To display this screen, refer to ste...
Page 69 - Input text, and then select “
69 Chapter 2 More Menus Features 5 Input text, and then select “ OK ”. z Up to 32 characters. z For instructions on how to enter characters, refer to Using the Keyboard in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 6 Select “ OK ”. z For the following steps, refer t...
Page 70 - Centering
70 Chapter 2 More Menus Features Centering The copying image can be centered automatically on selected paper. z This function can be selected when the original is placed on the platen. z As the original is placed on the platen, the position of the original may be erroneously detected if influenced b...
Page 71 - Image Repeat; Create multiple images on the sheet from single original.
71 Chapter 2 More Menus Features Image Repeat Create multiple images on the sheet from single original. z You can change to have dotted lines printed between each copy images. Refer to Copier Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. z This function can...
Page 72 - Inser tion Modes; Add a Cover Page to Copies
72 Chapter 2 More Menus Features Inser tion Modes Add a Cover Page to Copies The original can be copied using other types of paper as a Cover Page. Only the Front Cover, or Front and Back Covers can be selected. 1 Place original(s) on the ADF. z Refer to Placing Originals (Copy) in the Operating Ins...
Page 74 - Inserts Blank/Copied Pages Between Copies
74 Chapter 2 More Menus Features Inserts Blank/Copied Pages Between Copies The original can be copied by inserting other types of paper between specified pages. You can copy specified pages (including the cover page) on paper such as colored paper set in a Paper Tray, or on the Sheet Bypass. 1 Place...
Page 75 - Clear
75 Chapter 2 More Menus Features 7 Select “ OK ”. 8 Input the page numbers with keypad where the insertion pages are placed. z To erase an entered number, press the Clear key. 9 Select to enter the following page numbers where the insertion pages are placed. z By selecting and , move cursor to enter...
Page 76 - Inserts Blank Pages Between Transparency Film; Adding Paper
76 Chapter 2 More Menus Features Inserts Blank Pages Between Transparency Film 1 Place original(s) on the ADF. z Refer to Placing Originals (Copy) in the Operating Instructions (For Basic Operations) of provided booklet. 2 Press the Copy key if the machine is set to other function mode. 3 Select “ M...
Page 78 - Overlay Modes; Overlaying an Image onto the Copies; Auto
78 Chapter 2 More Menus Features Overlay Modes Overlaying an Image onto the Copies The original can be overlaid with the first page of the original.The first page is called the overlay original, and the second page onwards are called the scanned original, respectively. z The size available for both ...
Page 79 - When selecting from the basic colors; New Color
79 Chapter 2 More Menus Features 5 Select the color of the overlay original from the basic colors and registered custom colors, and then select “ OK ”. When selecting from the basic colors When selecting from the registered custom colors z If “ Add Custom ” is selected, Change Color Add Custom s...
Page 81 - Overlay Copying with Registered Image; Overlay an image stored in memory onto the copy.
81 Chapter 2 More Menus Features Overlay Copying with Registered Image Overlay an image stored in memory onto the copy. z Available size is 8.5" x 11". z “ Auto ” cannot be selected in color mode. z If the orientation of the original is different from the form, the original is copied by auto...
Page 82 - Save
82 Chapter 2 More Menus Features 5 Select the registered form, and then select “ OK ”. z For the details about how to register the form, refer to the Save (see page 83). z When Hard Disk Drive is not installed, the screen of step 5 is not displayed.(Hard Disk Drive is standard equipment for DP-C354/...
Page 83 - File Edit
83 Chapter 2 More Menus Features File Edit Up to 12 editing functions are available in the Form Overlay Feature. z Refer to the Overlay Copying with Registered Image (see page 81) z If Hard Disk Drive is installed, an image can be stored.(Hard Disk Drive is standard equipment for DP-C354/C264. It is...
Page 84 - Adjust the overlay level with “; Cancel
84 Chapter 2 More Menus Features 6 Select “ Save ”, and then select “ OK ”. 7 Select the specified colors of the form from basic/custom, and then select “ OK ”. When selecting from the basic colors When selecting from the registered custom colors z If “ Add Custom ” is selected, Add Custom scree...
Page 86 - Erase; Select the file name to be deleted.; File Name Edit; Select the file name to be edited.
86 Chapter 2 More Menus Features Erase 1 Select the file name to be deleted. z To display File Edit screen, refer to steps 2 to 4 in Save (see page 83). 2 Select “ Erase ”, and then “ OK ”. 3 Select “ Yes ”. z After completing the deletion of the form, press the Reset key to cancel the settings. ...
Page 88 - Chapter 3 Other Features; Making Copies with the ADF Opened; Skyshot Mode; Skyshot Mode can be selected in the standard settings.; Normal
88 Chapter 3 Other Features Chapter 3 Other Features Making Copies with the ADF Opened The original can be copied without generating dark borders even if the ADF is opened. Skyshot Mode Skyshot Mode can be selected in the standard settings. z When “ 2 Page ” or “ N in 1 ” is selected, only “ Normal ...
Page 89 - Manual Skyshot Mode; Copying with pre-registered scan size into memory.
89 Chapter 3 Other Features Manual Skyshot Mode Copying with pre-registered scan size into memory. z Before using the Manual Skyshot Mode, please set M1 or M2 in the preset jobs. Refer to the Copier Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. z Originals ...
Page 90 - 1 Reserve a Job Settings; Reserve a Job; Select copy features if necessary.
90 Chapter 3 Other Features Reser ving the Next Copy Job while the Current Copy Job is Progressing The next copy job can be reserved while the current copy job is under way. z If Hard Disk Drive is not installed, this function is not available.(Hard Disk Drive is standard equipment for DP-C354/C264....
Page 91 - You can interrupt the current copy jobs and make an urgent copy.; Interrupt
91 Chapter 3 Other Features Interrupt the Current Copy Jobs to Make an Urgent Copy You can interrupt the current copy jobs and make an urgent copy. z When scanning the current copy job, other copy jobs cannot be interrupted. 1 Press the Interrupt key while copying. 2 Place original(s). 3 Select copy...
Page 92 - Chapter 4 Appendix; Combined Copy Functions; Saddle Stitch
92 Chapter 4 Appendix Chapter 4 Appendix Combined Copy Functions 1 - > 2 2 - > 1 2 - > 2 2P a g e B ook - > 2 N in 1 Bo o k let M u lt i- S ize F e e d J o b Bu ild & SADF Sor t N on S o rt S h if t-S o rt S h if t-G ro u p R o ta te -S o rt R o ta te -G ro up St ap le -S or t Pun ch...
Page 94 - Index; Symbols
94 Chapter 4 Appendix Index Symbols “M1”/”M2” ....................................................................... 34 Numerics 1 -> 1 .............................................................................. 401 -> 2 ............................................................ 40, 61, ...
Page 98 - USA Only; WARRANTY
For Service, Call: The following trademarks and registered trademarks are used throughout this manual: Microsoft, Windows, Windows NT, Windows Server, Outlook & Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the USA and other countries.Microsoft product s...
