Page 2 - Table of Contents
Table of Contents Important Safety Precautions..........................................................................................................................1 Important Notice ....................................................................................................................
Page 3 - receptacles, and the point where they exit from the apparatus.; Important Safety Precautions
Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In ...
Page 5 - Do not use in hot and cold rooms (locations); screen; About Temperature; B. Do not display the fixed image for extended periods of time.; Important Notice
Do not use in hot and cold rooms (locations) ! When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. ! Do not leave the unit in a hot or co...
Page 6 - Cautions regarding use of remote control; Precaution on battery use; Open the battery cover.; Preparations; Using the Remote Control
< Use the remote control by pointing it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation. Cautions regarding use of remote control < Do not expose the remote control to shock. In addition, do not expose the remote co...
Page 7 - The antenna cable should not be bundled with the power cord.; TV REAR; Antenna Connection; Power Connection; Note
Preparations (continued) 5 75-ohm coaxial cable (round cable) INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Optimum reception of...
Page 8 - Identification of Controls; To access source input select menu.
Identification of Controls 6 1. CH+/- Press these two buttons to directly change the TV channel. In OSD menu, press these buttons to choose the OSD items. 2. VOL+/- Press the VOL+ or VOL- button to directly increase or decrease the sound volume level; In OSD menu, press these buttons to adjust the v...
Page 9 - Connect to your cable system or outdoor antenna.
Identification of Controls (continued) 7 1. Antenna input Connect to your cable system or outdoor antenna. 2. RS232 interface For service use . The user cannot operate the unit through this terminal.3. AV outputs(Video, Audio L, R) Connect to your VCR to record programs. 4. AV inputs (Video, Audio L...
Page 10 - Remote Control Unit; POWER: Switches the TV power on or Standby.; Below is teletext control buttons:; Press the button to view the updated teletext page.
Remote Control Unit Identification of Controls (Continued) POWER: Switches the TV power on or Standby. TV/Radio: Switches between TV and Radio mode. (DTV only) EPG: Displays the Electronic Program Guide (DTV only). FAV.LIST: Displays the favorite channel list. FAV+/ FAV–: Selects the favorite channe...
Page 11 - Refer to the operating manual of the external device as well.; Cautions Before Connecting; Connections; Connecting a VCR; TV Right Side; To playback Camcorder; or
Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model. Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their terminals. R...
Page 12 - Connecting Component Video; To connect a device using component video:; to select Component, then press OK to confirm.; To play component video from an external device:; Connecting a Computer; To play video from a computer
Connecting Component Video Connections (Continued) To connect a device using component video: 1. Turn on your TV, then press SOURCE button. The INPUT SOURCE menu opens.2. Press 5 or 6 to select Component, then press OK to confirm. 3. Turn on your external device and set it to the correct mode. See t...
Page 13 - Connecting an HDMI device; To play from the device using HDMI:; to select HDMI, then press OK to confirm.
Connections (Continued) 11 Connecting an HDMI device Connect the HDMI cable between the HDMI interface on the unit and HDMI output on the device. To play from the device using HDMI: How to connect a device using HDMI Connection: 1. Turn on your TV, then press SOURCE button. The Input Source menu ope...
Page 14 - List of main menus to help you with operations; Main Menu Overview; PICTURE menu; To navigate through the OSD main menu; Basic Operations; The Picture menu has more than one page, please use
1 3 With the power on, press MENU and the main menu screen displays. Within the menu, press 5 , 6 , 3 or 4 navigate through the options or adjust an option. Press OK to confirm a selection or enter a sub-menu. Press 3 or 4 to select menu. Press 6 to access the menu. 2 4 Press MENU to return to previ...
Page 15 - Displaying the Information Banner; The above OSD is only served as an example, and it is in DTV mode.; Selecting the Input Signal Source; Turning On; Turning On/Off the Power
Basic Operations (Continued) Displaying the Information Banner Press the INFO button to display the information banner. The information banner displays current status information such as the channel number and signal source. Depending on the mode, different information is displayed. In DTV mode, mor...
Page 16 - Memorizing the Channels; to select DTV Manual Tuning; Auto Channel Search; Start; Manual Searching for DTV programs
Memorizing the Channels When you turn on the TV for the first time, you should perform an auto channel search to set up stations on your TV.Note : Be sure to select the proper input source (ATV/DTV) before operation . 1 Highlight VHF CH item, press 3 or 4 button to select your desired channel number...
Page 17 - Manual Searching for ATV programs; Manual Fine Tuning; Setting Audio System
1 Highlight Storage To item, press 3 or 4 button to select a channel position in which you want to store. In Channel menu, press 6 or 5 to select ATV Manual Tuning item, then press 4 or OK to access. 2 If desired analog programs cannot be searched by Auto Tuning, you can make use of ATV Manual Tunin...
Page 18 - Labeling Channels; to select a channel you want to; Setting Favorite Channels; to select Programme; button to display the avorite list,; to select Programme Edit item, press
Memorizing the Channels (Continued) Labeling Channels If required, you can give a name to the programs. 4 Within the program list, press 6 or 5 to select a channel you want to edit, press GREEN button to start to label. Then a name symbol appears alongside. 5 Use 6 or 5 to select character to input,...
Page 19 - To delete channels; Channel List Management; to scroll the page upward or downward.; BLUE; To skip unnecessary channels
Memorizing the Channels (Continued) 17 1 Select the channel you want to move in the Programme Edit menu. Press 6 or 5 to select your unwanted channel, press RED button and a delete symbol appears alongside the selected channel in the list. Press RED button again to finish the delete. To delete chann...
Page 20 - Channel and Program Selection
Channel and Program Selection = RECALL will not work if no channel has been changed after TV is turned on. Note Please note: your new TV is capable of receiving both radio and TV broadcasts. And for TV reception, your new TV is capable of receiving both traditional analog channels and digital channe...
Page 21 - Picture Adjustment; Customizing the Picture; Option
Picture Adjustment 19 Customizing the Picture 1 3 Press MENU and the main menu screen displays. Within the menu, press 5 or 6 to scroll through the page upward or downward, and press 5 , 6 , 3 , 4 to navigate through the options or adjust an option. Press 3 or 4 to select Picture menu, press 6 to ac...
Page 22 - Sound Adjustment; Adjusting the Sound; Using the Mute
Sound Adjustment 20 Press the VOL + or VOL- to increase or decrease the volume. Press the MUTE button to temporarily turn off all sound. To restore the sound, press the MUTE button again. Adjusting the Sound 1 3 Press MENU and the main menu screen displays. Within the menu, press 5 or 6 to navigate ...
Page 23 - Stereo/Bilingual Selection; Stereo; NICAM Broadcast Selection; Audio Track Selection
Sound Adjustment (Continued) Stereo/Bilingual Selection (for analog channels) You can quickly select sound multiplex mode by using the STEREO button on the remote control. This enables the selection of the reception mode when receiving a NICAM signal. To let you enjoy NICAM broadcasting, this TV set...
Page 24 - System Setup; to navigate through the options
Picture Sound Time Option Lock Channel Select Move Menu Exit Hearing Impaired Off SPDIF Auto Audio Preference Dolby Digital Language English System Setup System Setup 1 3 Press MENU and the main menu screen displays. Within the menu, press 5 , 6 , 3 , 4 to navigate through the options or adjust an o...
Page 25 - Block Program Setup; Rating and Lock Setup; Password Setup; To create a new password; OK button to access its submenu.
Block Program Setup 1 3 2 The Block Program function blocks any channels that you do not want to watch or that you do not want your children to watch. Navigate to the Lock menu and input the correct password to access. Use 5 or 6 to highlight Block Program item, press 4 or OK to access. Now the Bloc...
Page 26 - Lock Tuning Setup; Restoring Factory Default
Rating and Lock Setup (Continued) Lock Tuning Setup Making use of Lock Tuning you can protect some TV settings from being accidentally changed. 1 Navigate to the Lock menu and input the correct password to access. Now the Lock Tuning item will be highlighted automatically. 3 Use 3 or 4 to turn on or...
Page 27 - Timer Setup; Time Zone Selection; Current Time Setup
Timer Setup 25 Time Zone Selection 1 3 Press MENU and the main menu screen displays. Press 5 or 6 to select Time Zone item, and then press 3 or 4 to select the appropriate one. Press 3 or 4 to select Time menu, press 6 to access. 2 To obtain local time, you should first set local time zone. and it d...
Page 28 - Off Timer Setup; Off; Hour or Minute item, and press; Time Setup; Sleep Timer Setup; Auto Sleep Setup
Off Timer Setup 1 3 Navigate to the Time menu press 6 to access. Now the Activate item will be highlighted automatically, press 3 or 4 to select On . (If you want to cancel setting, please choose Off ) Press 5 or 6 to select Off Time item, press 4 or OK to access the submenu. 2 With Off Timer functi...
Page 29 - EPG Operation; EPG; Opereation; PROGRAMME GUIDE
EPG Operation EPG The Electronic Programme Guide (EPG) makes it possible for users to see details about the programme they are watching, other programmes and even a schedule of the next 7 days. The information available includes the number and name of the channel, the name and type of programme, the...
Page 30 - Teletext; To Turn On/Off Teletext; background while viewing the TV program simultaneously; Subtitle
Teletext Teletext & Subtitle Select a TV channel providing the Teletext program.Press TTX button to display the teletext. Press TTX button again to switch back to TV screen. Your System receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News,...
Page 31 - Auto adjust; Screen Setup; Vertical Position
Screen Setup for D-SUB(PC) Mode Before adjusting the screen, make sure that you select the correct source (D-SUB). 29 Option Description Auto adjust Horizontal Position Size Phase Selects and activates to start auto adjustment. The set automatically adjusts the image settings, such as position and p...
Page 32 - Remote Control; Video and Audio; Problem; Troubleshooting
Remote Control If, after reading these operating instructions, you have additional questions related to the use of your television, please call the services center in your local area.Before calling service, please check the symptoms and follow suggested solutions. Problem Possible Solutions Remote c...
Page 33 - General; Lost password
Troubleshooting General Problem Possible Solutions One or some channels can’t be displayed ! These channels may be locked. Please unlock them (see <Rating and Lock Setup> section). ! These channels may be set skipped in the channel list. You may set it to not skipped or select them with 0-9 nu...
Page 34 - Specifications; Design and specifications are subject to change without notice.
Type: LCD TV Display Size diagonal: 19” Power Supply: AC220-240V 50/60Hz Power Consumption: 50W Dimensions(mm): 543 (W) x 453 (H) x 175(D) Unit Weight(kg): 8 Specifications ! Design and specifications are subject to change without notice. Note 32 TV System: Analogue: CCIR(PAL-B/G, NTSC(AV)) Digital:...
Page 35 - PALSONIC CUSTOMER SERVICE; Ver
5944032500 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 Ver 1 . 0
