Paint Zoom 90PZ02BM01 - User Manual

Page 3 - WARNING! FIRE AND EXPLOSION HAZARD; MINIMUM GAUGE FOR EXTENSION CORD

SAFETY INSTRUCTIONS IMPORTANT ELECTRICAL INFORMATION m WARNING! FIRE AND EXPLOSION HAZARD m • CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY, DO NOT EXPOSE TO RAIN; STORE INDOORS. • The materials used with this spray gun (paint, thinners, etc) may contain hazardous, harmful, explosive or co...

Page 4 - PRODUCT COMPONENTS

PRODUCT COMPONENTS 3 4 1. Spray gun2. Air cap ring3. Spray Pattern Adjuster / 3-way dial spray head 4. Nozzle5. O-ring6. Nut7. Paint flow adjuster8. Gasket9. Trigger10. Pick up tube11. Paint container 12. Hose13. Motor base14. Viscosity Cup15. Shoulder Strap16. Nozzle Cleaning Needle 1. Spray Gun 7....

Page 5 - IMPORTANT: SELECTING PAINT; UNIT SET UP; ATTACHING THE AIR HOSE

IMPORTANT: SELECTING PAINT • Your Paint Zoom ® unit can be used with a wide variety of paints, stains and coatings such as deck and fence stains, latex, sealers, varnishes, wood preservatives, enamels, oil and water-based paints and automotive paints. • However, there are some materials that cannot ...

Page 6 - MATERIAL PREPARATION; Material Run out Time (Sec)

• Viscosity is a technical term used to indicate if a liquid is thin or thick. Having the correct viscosity of paint is important to ensure the paint atomizes correctly and sprays well giving you a good quality finish. If your material is thin like water then the viscosity is said to be low, while i...

Page 7 - THINNING; SURFACE & JOB PREPARATION

Paint is “thinned” by adding the substance upon which the paint is based. If it is water-based paint then water is added; if oil based then mineral spirit or manufacturer’s recommended thinner is added. If the paint requires thinning, start with a 10% dilution of the paint. To do this, partially fil...

Page 8 - ALIGNING THE SUCTION TUBE; FILLING THE PAINT CONTAINER

• By pointing the suction tube in the proper direction, you will not have to refill the container as often. Note: Don’t tilt it at a large angle. A) If you are going to be spraying in an upward direction, the angled end of the suction tube should be pointing toward the rear of the gun. B) If you are...

Page 9 - EVEN COAT THROUGHOUT; HOW TO SPRAY PROPERLY; ADJUSTING THE FLOW OF PAINT

m WARNING! m NEVER trigger the gun while adjusting the spray pattern adjuster. NEVER point the spray gun at yourself or any other person. • Set the material volume by turning the regulator on the rear part of the spray gun. • Position the spray gun perpendicular to and approximately 6 to 12 inches f...

Page 10 - TECHNIQUE; ADJUSTING SPRAY PATTERNS

TECHNIQUE It is recommended you spend some time practicing on cardboard to familiarize yourself with how the spray gun works and the flow rate of the material. When spraying, always keep your arm at the same distance from the surface and avoid turning your wrist as this will help give you an even pa...

Page 11 - CLEAN UP; CAUTION; TOP TIPS

CLEAN UP m WARNING! m SPECIAL CLEANUP INSTRUCTIONS FOR USE WITH FLAMMABLE SOLVENTS: • Always flush spray gun, preferably outside, at a hose length from motor base.• Area must be free of flammable vapors.• Cleaning area must be well-ventilated. 1) Turn the motor base OFF.2) Trigger the spray gun so t...

Page 12 - TROUBLESHOOTING; PROBLEM

Your Paint Zoom ® multifunction paint sprayer is warranted to be free from defects in materials and workmanship for one year from the original purchase date. Should the product have a defect in materials or workmanship, we will repair or replace it without charge to you (a shipping and processing fe...

Page 13 - ARBITRATION AGREEMENT

21 22 PLEASE READ THIS AGREEMENT CAREFULLY. YOU ACCEPT THE TERMS OF THIS AGREEMENT BY RETAINING THE PRODUCT(S) SHIPPED IN CONNECTION WITH THIS AGREEMENT (THE “PRODUCTS”) FOR MORE THAN THIRTY (30) DAYS AFTER RECEIPT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, YOU MAY RETURN THE PRODUCT TO CO...

Paint Zoom 90PZ02BM01 - User Manual

Table of Contents:

Summary