Oregon Scientific EMR812 - Manual
Oregon Scientific EMR812 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SENSOR
- Page 3 – BEFORE YOU BEGIN
- Page 4 – BATTERY INSTALLATION: MAIN UNIT; LOW BATTERY WARNING
- Page 6 – HOW TO USE TEMPERATURE ALARMS; Press HI/LO button to set another limit or return to normal; HOW TO READ THE KINETIC; Press MEM once to display the maximum temperature and again
- Page 8 – Temperature Measurement
- Page 9 – NOTE ON COMPLIANCE
- Page 11 – CABLE FREE THERMOMETER; Instruction Manual
1
GB
MULTI-CHANNEL IN-OUT
CABLE FREE THERMOMETER
MODEL: EMR812
USER’S MANUAL
INTRODUCTION
Congratulations on your purchase of the EMR812 Multi-Channel
In-Out Thermometer with 433MHz cable free sensor.
The EMR812 is an easy-to-use, state-of-the-art thermometer. The
basic package comes with a main unit, which is the temperature
station, and a remote unit, the thermo sensor.
The main unit has extra-large read-outs for indoors temperature
and for that collected and transmitted by the remote unit. The main
unit can support up to three remote units.
The main unit is capable of monitoring temperature changes of
remote sites. By setting the upper and lower temperature limits the
alarm will activate when those limits are exceeded. Also, the maxi-
mum and minimum temperature of different sites can also be
retrieved quickly.
No wire installation is required between the main and remote units.
As the EMR812 operates at 433MHz, it can be used in the U.S. and
most places in Continental Europe.
MAIN FEATURES: MAIN UNIT
H I
O N / O FF
R E S E T
T E M P A L
° C
° F
L O
C H A N N E L
M E M
C L E A R
4 3 3 M H z C A B L E F R E E
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 GB L WALL - MOUNT RECESSED HOLE For mounting the main unit on a wall FEATURES: REMOTE THERMO-HYGRO SENSOR A EXTRA LARGE TWO - LINE DISPLAY Facilitates easy reading of remote and indoors temperatures B CHANNEL BUTTON Selects among different channels C MEMORY (MEM) BUTTON Recalls the maximum or mini...
3 GB A. TWO-LINE LCD Displays the current temperature and humidity monitored bythe remote unit B. LED INDICATOR Flashes when the remote sensor transmits a reading C. °C/°F SLIDE SWITCH Selects between Centigrade (°C) and Fahrenheit (°F) D. CHANNEL SLIDE SWITCH Select the remote sensor Channel 1, Cha...
4 GB 4. Insert the batteries strictly according to the polarities shown therein. 5. Replace the battery compartment door and secure its screws. Replace the batteries when the low-battery indicator of the particularchannel lights up on the main unit. (Repeat the steps described insection “BEFORE YOU ...
