Oreck Steam 50 Steam Cleaners. T - Manual

6 Grounded Plug This appliance must be grounded. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must on...

7 Parts and Features Product Components & Accessories The Steam 50 makes cleaning tile, vinyl, and sealed hard floors easy. It is lightweight, portable, and easy to store. The Steam 50 is ready to clean in thirty seconds and will automatically turn off when it is in the upright position. The par...

8 1. Insert the Lower Tube into the Handle Tube. Be sure the two handles are securely attached by pulling on the upper and lower tubes. 2. Insert the tube assembly into the Body until it clicks into place. 3. Insert the nozzle on the bottom of the Body into the Floor Head until the the nozzle is sea...

9 Before You Begin Cleaning 1. Unlock the clamp and slide it up the tube assembly. 2. Remove the water tank. 3. Remove the cap on the water tank. 4. Fill the water tank 3/4 full. Do not overfill the water tank. WARNING! ! Do not plug the steam cleaner into an electrical outlet during assembly. NOTIC...

10 C LO S E O P E N 4. Put the cap on the water tank and close completely. Place the tank back into the body. Check that the water tank is properly seated. 5. Slide the clamp over the top of the water tank and close the lock. 6. Vacuum or sweep the floor completely before using the steam cleaner. 7....

11 C LO S E O P E N After Cleaning WARNING! ! To reduce the risk of personal injury, unplug cord from electrical outlet and let the unit/accessories cool down completely before handling. 1. Unplug the steamer. 2. Move the Steam Switch Knob to the closed position. 3. Unlock the clamp and slide it up ...

12 Steamer 50 Care and Cleaning Cleaning the Pad1. Using mild detergent, machine wash at maximum 104° F (40° C). 2. Allow the pad 24 hours to dry. Steamer Care • Wipe the surfaces of the cleaner with a soft cloth • Store upright in a dry, protected area NOTICE Never use bleach or fabric softener whe...

13 Trouble- shooting Problem Check Solution Cleaner will not run • The power cable is damaged or plug in properly. • Wall outlet is faulty. • Be sure cleaner is firmly plugged into wall outlet. • Check electrical source – fuse or circuit breaker. Steam is not emitted when the steam cleaner is ON. • ...

14 Parts Item Number Replacement Parts Cleaning Pad, 4 pack STEAMKIT50 To order, call our customer service group or visit our website. Please have your model number from the data label on the bottom of the unit.

15 Warranty Steam 50 Steam Cleaner ORECK MANUFACTURING COMPANY: (Oreck Manufacturing Company gives you the following limited warranty for this product only if it was originally purchased for residential use, not resale, from Oreck or an Oreck Authorized Retail Dealer.)Oreck will repair or replace, f...