Onkyo Y1105-1 - Manual

E

n

5.1ch Home Cinema Package

Y1105-1

2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8163
http://www.onkyo.com/

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650
http://www.us.onkyo.com/

Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4401-555
http://www.eu.onkyo.com/

The Coach House 81A High Street, Marlow, Buckinghamshire, SL7 1AB, UK
Tel: +44-(0)1628-473-350 Fax: +44-(0)1628-401-700

Unit 1 & 12, 9/F, Ever Gain Plaza Tower 1, 88, Container Port Road, Kwai Chung,
N.T., Hong Kong. Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.ch.onkyo.com/

1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai,
China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396

SN 29400781

(C) Copyright 2011 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved.

* 2 9 4 0 0 7 8 1 *

Using the Rubber Stoppers for a More Stable Platform

Attaching and detaching the speaker grilles

Front speaker (SKF-648)

Center speaker (SKC-648)

Surround speaker (SKR-648)

Front speakers

Speaker cables 3.5 m

Center speaker

Speaker cable 3.0 m

Surround speakers

Speaker cables 8.0 m

12 rubber stoppers* (For Front/Surround speakers)

4 rubber stoppers

*

*

Configuration of the rubber stoppers may be different from the figure, such as being 2 sheets instead of 1 sheet, but the total number will be same.

We recommend using the supplied rubber stoppers to achieve
the best possible sound from your speakers.
The rubber stoppers prevent the speakers from moving,
providing a more stable platform.

The front, center and surround speakers have detachable grilles.
See the right illustrations to attach or detach them.

(White)

(Red)

(Green)

(Blue)

(Gray)

Speaker terminals

SKF-648
SKR-648

Speaker terminals

SKC-648

Rubber stoppers

Bottom of the
SKF-648
SKR-648

Bottom of the
SKC-648

Rubber stoppers

Removal

Replacement

■

Front

■

Rear

Note

• The Auto Standby function turns the subwoofer on when the input signal exceeds a

certain level. If the Auto Standby function does not work reliably, try slightly increasing
or decreasing the subwoofer output level on your receiver.

• If the Standby/On indicator lights (both red and blue LEDs) several seconds or minutes

after the sound output stopped, this means that the amp protection circuit has been acti-
vated. In this case, set the OUTPUT LEVEL control to the center position, and discon-
nect the power cord from the AC outlet. Wait at least 10 seconds, and then reconnect the
power cord. If that doesn’t solve the issue, contact your Onkyo dealer.

Setting the Subwoofer Level

To set the level of the subwoofer, use the OUTPUT LEVEL control.
Set it so that bass sounds are evenly balanced with the treble sounds
from the other speakers. Because our ears are less sensitive to very
low bass sounds, there’s a temptation to set the level of the
subwoofer too high. As a rule of thumb, set the subwoofer level to
what you think is the optimal level, and then back it off slightly.

Using the Floor Pads for Subwoofer

If the subwoofer is placed on a hard floor
(wood, vinyl, tile, etc.) and playback is very
loud, the subwoofer’s feet may damage the
flooring. To prevent this, place the supplied
pads underneath the subwoofer’s feet. The pads
also provide a stable base for the subwoofer.

Subwoofer (SKW-501E)

Subwoofer

RCA cable 3.0 m

4 floor pads

STANDBY/ON indicator

Red: Subwoofer in standby mode
Blue: Subwoofer on
With the Auto Standby function, the SKW-501E
automatically turns on when an input signal is
detected in Standby mode. When there’s no input
signal for a while, the SKW-501E automatically
enters Standby mode.

POWER switch

Press this switch to the ON position to turn on the
power. Press it to the OFF position to turn off the
power.

OUTPUT LEVEL control

This control is used to adjust the volume of the
subwoofer.

LINE INPUT

This RCA input should be connected to the
subwoofer pre out on your AV receiver with
supplied RCA cable.

To AC outlet

Pad

Enjoying Home Cinema

The Home Cinema means that you can enjoy surround sound with a real sense of movement in your own home — just like being in
a movie theater or concert hall.

Connecting the Speakers

Corner
position

1/3 of wall
position

Center speaker (SKC-648)

Position it close to your TV (prefer-
ably on top) facing forward at about
ear level, or at the same height as the
front left and right speakers.

Front left and right speakers (SKF-648)

They should be positioned facing the listener at about ear level,
and equally spaced from the TV. Angle them inward slightly so as
to create a triangle, with the listener at the apex.

Surround left and right speakers (SKR-648)

Position them at the sides of the listener, or
slightly behind, about 60 to 100 cm above ear
level. Ideally they should be equally spaced
from the listener.

Subwoofer (SKW-501E)

The subwoofer handles the bass sounds of the LFE (Low-Frequency Effects)
channel and bass from the satellite speakers when a crossover is specified.
The volume and quality of the bass output from your subwoofer will depend
on its position, the shape of your listening room, and your listening position.
In general, a good bass sound can be obtained by installing the subwoofer in
a front corner, or at one-third the way along the front wall, as shown.

Red

White

Green

Front right

speaker

Center speaker

Gray

Front left

speaker

Surround right

speaker

Speaker Connection
Precautions

Read the following before connecting your
speakers:
• Turn off your receiver before making any

connections.

• Pay close attention to speaker

wiring polarity. Connect
positive (+) terminals to only
positive (+) terminals, and
negative (–) terminals to only negative (–)
terminals. If the speakers are wired
incorrectly, the sound will be out of phase
and will sound unnatural.

• Be careful not to short the positive and

negative wires. Doing so may damage
your amp.

Powered

subwoofer

*

Using the supplied RCA cable,
connect the subwoofer’s LINE
INPUT to your AV receiver’s
SUBWOOFER PRE OUT jack.

Blue

Surround left

speaker

Specifications

■

Powered Subwoofer (SKW-501E)

■

Front Speakers (SKF-648)

■

Center Speaker (SKC-648)

■

Surround Speakers (SKR-648)

Specifications and appearance are subject to change without
prior notice.

Note

For non-magnetic shielded speakers:

Try moving the speakers away from your TV or monitor. If discoloration should occur, turn off your TV or monitor, wait 15 to 30
minutes, and then turn it back on again. This normally activates the degaussing function, which neutralizes the magnetic field,
thereby removing any discoloration effects.

Type

Bass-Reflex

Input sensitivity/impedance

410 mV / 20 k

Ω

Rated output Power (IEC)

80 watts minimum continuous power,
4 ohms, driven at 100 Hz with a
maximum total harmonic distortion of
1 %

Frequency response

27 Hz to 150 Hz

Cabinet capacity

24.5 L

Dimensions (W

×

H

×

D)

230 mm × 425 mm × 412 mm
(incl. grille and projection)

Weight

9.1 kg

Drivers unit

20 cm Cone Woofer × 1

Power supply

(HTP-648)

AC 230V, 50Hz

(SKS-HT648)

AC 220-240V, 50/60 Hz

Power consumption

105 W

Other

Auto Standby function
Non-magnetic shielding

Type

2 Way Closed Box

Impedance

6

Ω

Maximum input power

130 W

Sensitivity

79 dB/W/m

Frequency response

70 Hz to 50 kHz

Crossover frequency

7 kHz

Cabinet capacity

0.9 L

Dimensions (W

×

H

×

D)

102 mm × 170 mm × 105 mm
(incl. grille and projection)

Weight

1.0 kg

Drivers unit

8 cm Cone Woofer × 1
2.5 cm Balanced Dome Tweeter × 1

Terminal

Spring type color coded

Grille

Detachable

Insert nut

Available

Other

Magnetic shielding

Type

2 Way Closed Box

Impedance

6

Ω

Maximum input power

130 W

Sensitivity

82 dB/W/m

Frequency response

70 Hz to 50 kHz

Crossover frequency

7 kHz

Cabinet capacity

1.3 L

Dimensions (W

×

H

×

D)

277 mm × 110 mm × 110 mm
(incl. grille and projection)

Weight

1.7 kg

Drivers unit

8 cm Cone Woofer × 2
2.5 cm Balanced Dome Tweeter × 1

Terminal

Spring type color coded

Grille

Detachable

Insert nut

Available

Other

Magnetic shielding

Type

Full Range Closed Box

Impedance

6

Ω

Maximum input power

130 W

Sensitivity

80 dB/W/m

Frequency response

80 Hz to 20 kHz

Cabinet capacity

0.9 L

Dimensions (W

×

H

×

D)

102 mm × 170 mm × 105 mm
(incl. grille and projection)

Weight

0.9 kg

Drivers unit

8 cm Cone × 1

Terminal

Spring type color coded

Grille

Detachable

Insert nut

Available

Other

Magnetic shielding

HTP-648/SKS-HT648