Onkyo SKS-4700 - User Manual
Onkyo SKS-4700 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Placement; Using spacers; Use with a TV set; Mounting on a wall; Attaching and detaching the speaker grilles (for SKC-4700 only)
- Page 3 – 使用手册; 扬声器系统; 连接; 连接到 AV 放大器
- Page 4 – 扬声器前格板的安装和拆除(仅适用于 SKC-4700); 使用调整垫; 安放; 作为电视机的外接扬声器使用时; 规格和外形如有变更,恕不另行通知。
E
n
Thank you for your purchase of the Onkyo speaker system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will enable you to
obtain optimum performance and listening enjoyment from
your new speaker system.
Please retain this manual for future reference.
Before using this unit
●
The speaker cabinet is made of wood and is therefore sensitive to
extreme temperatures and humidity. Avoid placing the speaker
systems in locations subjected to direct sunlight, or in smoky or in
humid places, such as near an air conditioner, humidifi er, bathroom,
or kitchen. Doing so may result in damage to the speaker.
●
Place the unit on a rigid, level surface. Placing it on a slanted
surface or weak base not only may cause the unit to fall, but
also results in decreased sound quality.
●
Be sure to turn off your amplifi er before connecting the speaker
system. Connecting them with the amplifi er's power on may result
in damage to the amplifi er or the speaker system.
●
Keep water or other liquids away from the unit. If water is spilled
into the unit, not only the unit but also the speakers themselves
may be damaged.
Precaution on use
●
This speaker system can handle the specifi ed input power when
it is used for ordinary music reproduction. If the following abnormal
signals are fed to the speaker, however, an overcurrent may
fl ow in the internal circuits, causing burning or breakage of the
wires even if the input power is below the specifi ed rating.
1. Noise produced when FM station is not tuned in
2. Sound produced when fast-forwarding cassette tape deck
3. High-frequency sound generated by an oscillator, an
electronic musical instrument, etc.
4. Oscillating amplifi er signals
5. Special test signals produced by audio checking CD, etc.
6. Sound produced when connecting or disconnecting audio
connection cables (Always turn off the amplifi er’s power
before connecting or disconnecting cables.)
7. Howling when a microphone is used
●
Do not place magnetic objects such as screwdrivers and iron
parts near the tweeter since they use speakers with strong
magnets. Otherwise, the objects may be attracted, causing
injury or damaging the diaphragm.
Model name
Center speaker system
SKC-4700
×
1
Surround speaker system
SKM-4700
×
2
Connections
●
Turn the sound volume to the minimum and disconnect the power
cord from the amplifi er before connecting the speaker cables.
●
The nominal impedance of this speaker system is 8
Ω
. Use
only amplifi ers capable of handling this impedance.
●
Use the supplied speaker cables to connect between speaker’s
input terminals and the amplifi er’s speaker
terminals as illustrated on the right.
●
Connect the speaker cables securely to the
terminals, with the core wires twisted
properly. In this case, make sure that the
core wires do not touch each other. Note
that a short circuit in core wires may result
in damage to the amplifi er.
Instruction Manual
SKS-4700
SPEAKER SYSTEM
Connecting to AV amplifi er
Before turning on the amplifi er’s power switch:
●
Make sure that the positive (+) and negative (-) speaker cables
do not contact each other. Otherwise, a short-circuit may occur,
causing damage to the amplifi er.
●
Be sure to connect the speaker cables with correct polarity
(connect the speaker’s positive (+) and negative (-) binding
posts with the amplifi er’s corresponding speaker terminals).
Reversed polarity results in impaired bass-range reproduction,
causing mislocalization of the sound image. Also, be sure to
connect the Right and Left speakers with the amplifi er’s
corresponding speaker terminals.
●
Pull lightly on the speaker cables to ensure that they are
connected fi rmly.
L
R
SURROUND BACK
SPEAKER
SURROUND
SPEAKERS
FRONT
SPEAKERS A
CENTER
SPEAKER
+
–
+
–
+
–
+
–
+
–
1. Strip the insulation of speaker cables,
and twist the core wires tightly.
2. While pressing the lever, insert the
wire into the hole, and then release
the lever.
3. Make sure that the terminals are
gripping the core wires, not the
insulation.
Green
Blue
Gray
SKF-4700
Front right speaker
SKF-4700
Front left speaker
SKM-4700
Surround right speaker
SKM-4700
Surround left speaker
AV amplifi er
Red
White
SKC-4700
Center speaker
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Onkyo SKS-4700
Summary
Placement For better-quality sound, observe the following precautions when you install the speaker system: ● Placing the speaker system on several small-diameter supports generally results in better sound than placing it directly on a wide installation surface. Also note that high quality bass canno...
C s L R SURROUND BACK SPEAKER SURROUND SPEAKERS FRONT SPEAKERS A CENTER SPEAKER + – + – + – + – + – 非常感谢您购买Onkyo扬声器系统。在使用之前，请详细阅读本使用手册。遵照本使用手册的指示和说明进行操作，将使您通过新购置的扬声器系统，得到最佳的音响效果和听觉享受。请妥善保管本使用手册，以备将来参考。 使用本系统之前 ● 本扬声器的箱体是木质的，因此，对极高（或极低）的温度和 湿度非常敏感。请不要将扬声器系统放置在阳光直射之处，或多烟尘和高湿度的地方，如靠近空调机、加湿器、浴室或厨房中。否则，将...
安装在墙壁上 墙壁挂架 调整垫 SKM-4700底部 扬声器前格板的安装和拆除（仅适用于 SKC-4700） SKC-4700使用可拆式前格板。安装和拆除的方法如下。 1. 用两手抓住扬声器前格板的底边，轻轻向外拉，将前格板的下部拆 开。 2. 用同样的方法，轻轻向外拉前格板的上边，将前格板从箱体上拆 下。 3. 装回前格板时，将突起部推入扬声器箱体的前格板安装插孔。 使用调整垫 将随附的4个调整垫固定到SKC-4700/SKM-4700。 安放 为了获得最佳的音质，在安装扬声器系统时请遵守下列注意事项。● 与直接安放在平面上相比，将扬声器系统安放在几个支脚上能获得更 佳的音响效果。另外，如果...
