Onkyo RFR-5 - User Manual
Onkyo RFR-5 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Precautions
- Page 3 – Introduction
- Page 5 – Installation
- Page 9 – Troubleshooting
- Page 10 – Specifications
- Page 11 – Memo
Thank you
for purchasing the Onkyo RF Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit. Following the
instructions in this manual will enable you to obtain
optimum performance and listening enjoyment from
your new RF Receiver. Please retain this manual for
future reference.
RFR-5
RF Receiver
Instruction Manual
Contents
Introduction .................. 3
About the RFR-5 ................. 3
Possible Set-ups ................... 4
Installation .................... 5
Working Angle and Range of
the IR blaster .................... 5
Mounting ............................. 6
Using the IR Emitters .......... 6
How to use the emitters ....... 7
Connecting Onkyo components
equipped with IR IN
terminal ............................ 7
Connecting the Power
Adapter ................................ 7
Settings ................................ 8
RF Interference .................... 8
Troubleshooting ........... 9
Specifications ................ 10
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Onkyo RFR-5
Summary
2 Care From time to time you should wipe the front andrear panels and the cabinet with a soft cloth. Forheavier dirt, dampen a soft cloth in a weak solu-tion of mild detergent and water, wring it outdry, and wipe off the dirt. Following this, dryimmediately with a clean cloth. Do not use roughmateri...
3 Introduction About the RFR-5 Most remote controller systems have to beoperated by pointing the remote controllerdirectly towards a device. Any obstacle betweenthe remote controller and the device disturbs theoperating signal. But what if you like to placeyour devices inside a closed cabinet, a clo...
5 Installation The following components should be present: RFReceiver, power adapter, 3 IR emitters, Monocable and 4 screws.Before you install the RF Receiver, you shoulddecide which of the set-ups described on p. 2apply to your needs. It is recommended to readthrough the entire User Guide. Working ...
