Onkyo RC-391M - User Manual
Onkyo RC-391M – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Using the remote controller; Press the desired CD operation button.; ququ; DVD player buttons; Controlling an Onkyo CD player
- Page 3 – Press the desired MD operation button.; Turning the power on and off to the MD recorder; Press the desired tape deck operation button.; You may also use the following buttons:; Controlling an Onkyo MD recorder
- Page 4 – The remote controller has 408 memory slots (51 buttons; Programming procedure
- Page 5 – You can erase a learned code. You cannot erase preset codes.; Erasing a learned code; indicator
- Page 6 – Using a Macro function; : Use the numeric keys to select the desired song.; What is a Macro function?; Press and hold down the desired MODE button you wish to; Programming Macro mode
- Page 7 – Press and hold down any one of the eight MODE buttons; Macro Direct Learning function
- Page 8 – Press and hold down the corresponding MODE button and
- Page 9 – Open the battery cover and remove the batteries.
31
Using the remote controller
Overview
When you use a remote controller, typically you press one of the MODE buttons that corresponds to the device you wish to control, then
press the operation buttons. For example, if you wish to control the TX-DS575 from a remote controller, first press the MODE AUDIO but-
ton, then press an appropriate operation button. To control a CD player, press the MODE CD button, then press an appropriate operation but-
ton.
First, press the desired MODE button to make sure that the TX-DS575 is set to a correct mode.
Using the RC-391M to control each device
Note:
Before operating the RC-391M, turn on the POWER switch on the
TX-DS575 so that the unit enters standby mode.
1. Press the MODE AUDIO button.
2. Pressing the POWER ON buttons will switch between power on.
Pressing the POWER STNBY button will power standby.
SEND indicator
This indicator acts as a guide when commands are programmed
into or sent by the remote controller. It also warns the user when
an error is made or battery power is low.
1. Press the MODE AUDIO button.
2. Press the desired operation button.
Shaded buttons in the figure are the operation buttons used to
control the TX-DS575.
SLEEP
: Sleep function
POWER ON/STNBY
: Power on/standby
DISPLAY
: Changing the display
VOL
q
/
u
: Adjusting the volume
CH +/–
: Tuner preset number increment/decrement
INPUT SELECTOR
Listening mode (
STEREO
/
DSP
√
/
DSP
®
/
SURROUND
)
: Changing Listening mode
SP A/SP B
: Switching between Speakers A and B
CH SEL
: Selecting a speaker
DIMMER
: Adjusting the brightness of the display
LEVEL +/–
: Adjusting the speaker levels
TEST
: Test tone
MUTING
: Muting
Turning the power on and off to the TX-DS575
Controlling the TX-DS575
MODE
AUDIO
CH +/–
SP A/B
DISPLAY
POWER
STNBY
VOL
MUTING
Litening
mode
LEVEL +/–
DIMMER
CH SEL
INPUT
SELECTOR
TEST
POWER ON
SLEEP
MODE AUDIO
POWER
STNBY
POWER ON
SEND
indicator
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Onkyo RC-391M
Summary
32 Using the remote controller Note: First connect an Onkyo CD player using the connection. 1. Press the MODE CD button. 2. Press the desired CD operation button. TRACK : Selecting a track DISC : Selecting a disk in the CD changer : Down : Up : Playback : Stop : Rewind : Fast forward : Pause EJECT :...
33 Using the remote controller Note:Make sure that you point the transmission part on the remote con-troller toward the sensor area on the MD recorder. 1. Press the MODE MD/AUX button. 2. Press the desired MD operation button. Turning the power on and off to the MD recorder POWER ON/STNBY : Turning ...
34 Programming the remote controller codes of other devices into the RC-391M The RC-391M has two learning functions. One is a normal learning function that enables the RC-391M to learn other remote controllers’codes. The other is a macro learning function, which enables the RC-391M to learn a series...
