Page 2 - Important Safety Instructions; WARNING; AVIS
2 Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructi...
Page 3 - Precautions; Recording Copyright; Memory Backup; FCC Information for User
3 Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted material is illegal with-out the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care —Oc...
Page 4 - —Continued; For Canadian Models; Speaker Precautions; Placement
4 Precautions —Continued For Canadian Models NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.For models having a power cord with a polarized plug: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Modèle canadien REMARQUE: CET APPAREIL NUMÉ...
Page 5 - Supplied Accessories; Make sure you have the following accessories:; Indoor FM antenna
5 Supplied Accessories Make sure you have the following accessories: * In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and oper-ation are the same regardless of color. AV receiver (HT-R530) Remote controller & two batteries (AA/R6) Indoo...
Page 6 - Features; Amp
6 Features Amp • 7-channel amplifier • 110 watts per channel at 8 Ω (FTC) • WRAT (Wide Range Amplifier Technology) • Optimum gain volume circuitry • OptiResponse™ Equalizer (OR-EQ™) *1 function Processing • Dolby *2 Digital EX and Dolby Pro Logic IIx • DTS, DTS-ES Matrix/Discrete, DTS Neo:6, and DTS 9...
Page 7 - Table of Contents
7 Table of Contents Introduction Important Safety Instructions .......................2Precautions .....................................................3Speaker Precautions ......................................4Supplied Accessories ....................................5Features ........................
Page 8 - Display; See “Display” on page 9.; Front Panel; N O P; North American Model
8 Front & Rear Panels For detailed information, see the pages in parentheses. A STANDBY/ON button (32) This button is used to set the AV receiver to On or Standby. B STANDBY indicator (32) This indicator lights up when the AV receiver is in Standby mode, and it flashes while a signal is being rec...
Page 9 - RETURN button; Message area
9 Front & Rear Panels —Continued K TUNING MODE button (36) This button is used to select the Auto or Manual tun-ing mode. L Arrow/TUNING/PRESET & ENTER buttons When the AM or FM input source is selected, the TUNING [ ] [ ] buttons are used to tune the tuner, and the PRESET [ ] [ ] buttons ar...
Page 10 - Rear Panel
10 Front & Rear Panels —Continued A DIGITAL IN OPTICAL 1, 2, 3 & COAXIAL These optical and coaxial jacks can be used to con-nect a CD or DVD player and other components with digital audio outputs. B COMPONENT VIDEO A DVD player, TV, or other component that sup-ports component video can be co...
Page 11 - For detailed information, see the pages in parentheses.; Rear; Front
11 Front & Rear Panels —Continued For detailed information, see the pages in parentheses. A STANDBY/ON indicator Red: Subwoofer in standby mode Green: Subwoofer on With the Auto Standby function, the SKW-530 automatically turns on when an input signal is detected in Standby mode. When there’s no...
Page 12 - Remote Controller; RECEIVER mode is used to control the AV receiver.; How to Use the Remote Controller; RECEIVER mode: see page 12; RECEIVER Mode; RECEIVER
12 Remote Controller Including the AV receiver, the remote controller can be used to control up to seven different components. The remote controller has a specific operating mode for use with each type of component. Modes are selected by using the six REMOTE MODE buttons. ■ RECEIVER/TAPE Mode In RECE...
Page 14 - DVD Mode
14 Remote Controller —Continued To set the remote controller to DVD mode, press the [DVD] REMOTE MODE button. A STANDBY button This button sets the DVD player to Standby. B ON button This button is used to turn on the DVD player. C Number buttons These buttons are used to enter title, chapter, and t...
Page 15 - This button selects discs on a CD changer.
15 Remote Controller —Continued By default, the AV receiver is configured to control an Onkyo CD player. To set the remote controller to CD/MD/CDR mode, press the [CD] REMOTE MODE button. A STANDBY button This button sets the CD player or MD/CD recorder to Standby. B ON button This button is used to ...
Page 16 - TAPE Mode; TV Control Buttons; TV
16 Remote Controller —Continued TAPE mode is used to control an Onkyo cassette recorder connected to the AV receiver via . To set the remote controller to TAPE mode, press the [RECEIVER] REMOTE MODE button. For twin cassette decks, only deck B can be controlled. A Play [ ] button This button is used...
Page 17 - Before Using the AV receiver; Installing the Batteries; Slide the cover shut.; Using the Remote Controller
17 Before Using the AV receiver Notes: • The batteries should last for about six months, although this will vary with usage. • If the remote controller doesn’t work reliably, try replacing the batteries. • Don’t mix new and old batteries or different types of batteries. • If you intend not to use th...
Page 18 - Connecting Speakers; Speaker set A; Enjoying Home Theater
18 Connecting Speakers You can use two sets of speakers with the AV receiver: speaker set A and speaker set B. Speaker set A (supplied speakers and subwoofer) should be installed in your main listening room and can be used with Dolby Digital and DTS surround material. Each speaker must be positioned...
Page 19 - ohms or higher; Speaker Connection Precautions; Connecting Speaker Set A
19 Connecting Speakers —Continued Read the following before connecting your speakers:• You can connect speakers with an impedance of 8 ohms or higher . If you use speakers with a lower impedance, and use the amplifier at high volume lev-els for a long period of time, the built-in protection circuit m...
Page 20 - Connecting Antenna; The supplied indoor FM antenna is for indoor use only.; Connecting the Indoor FM Antenna; American Model; Be careful that you don’t injure yourself; Connecting the AM Loop Antenna
20 Connecting Antenna This section explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas.The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use th...
Page 21 - • Outdoor FM antennas work best outside, but usable; Using a TV/FM Antenna Splitter; Connecting an Outdoor FM Antenna; Connecting an Outdoor AM Antenna
21 Connecting Antenna —Continued If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available out-door FM antenna instead. Notes: • Outdoor FM antennas work best outside, but usable results can sometimes be obtained when installed in an attic or loft. • For ...
Page 22 - Connecting Your Components; Optical Digital Jacks; About AV Connections; Analog audio
22 Connecting Your Components • Before making any AV connections, read the manuals supplied with your other AV components. • Don’t connect the power cord until you’ve completed and double-checked all AV connections. Optical Digital Jacks The AV receiver’s optical digital jacks have shutter-type cove...
Page 23 - Video Connection Formats; Connecting Both Audio & Video; Which Connections Should I Use?
23 Connecting Your Components —Continued By connecting both the audio and video outputs of your DVD player and other AV components to the AV receiver, you can select both the audio and video simultaneously simply by selecting the appropriate input source on the AV receiver. The AV receiver supports ...
Page 24 - Connecting a TV or Projector; Step 1: Video Connection; A B; Step 2: Audio Connection
24 Connecting Your Components —Continued • With the basic connection, you can listen to or record audio from the TV, and listen via speaker set B. • To enjoy Dolby and DTS listening modes, use connection or . (Use and or and for recording.) Hint! If your TV has no audio outputs, connect your VCR to ...
Page 25 - Connecting a DVD player
25 Connecting Your Components —Continued • With the basic connection, you can listen to or record audio from a DVD, and listen via speaker set B. • To enjoy Dolby and DTS listening modes, use connection or . (Use and or and for recording.) • To enjoy DVD-Audio or SACD playback from a compatible DVD ...
Page 26 - Connecting a VCR or DVD Recorder for Playback; Connection
26 Connecting Your Components —Continued In addition to video playback, with this hookup example, you can use the VCR’s tuner to listen to the sound of your favorite TV programs via the AV receiver. This is useful if the TV has no audio outputs. • With the basic connection, you can listen to the VCR...
Page 27 - Connecting a VCR or DVD Recorder for Recording; Connecting a Camcorder, Games Console, or Other Device; Signal; Choose a video connection type (; Make audio connection; Make video connection
27 Connecting Your Components —Continued Connecting a VCR or DVD Recorder for Recording Connection HT-R530 Signal flow VCR/DVD recorder Picture quality VIDEO 1 OUT S ⇒ S-Video input Better VIDEO 1 OUT V ⇒ Composite video input Standard VIDEO 1 OUT L/R ⇒ Audio L/R input — Connecting a Camcorder, Games...
Page 29 - CD Player, or Turntable with Built-in Phono Preamp; Connecting a CD Player or Turntable
29 Connecting Your Components —Continued ■ CD Player, or Turntable with Built-in Phono Preamp • With the basic connection, you can listen to or record audio from the CD player or turntable, and listen via speaker set B. • To connect the CD player digitally, use connection or . (Use and or and for re...
Page 30 - Connecting the Power Cord of Another Component; American model
30 Connecting Your Components —Continued • With the basic connection, you can play and record with the recorder, and listen via speaker set B. • To connect the recorder digitally for playback purposes, use connections and or and . The AV receiver has an AC outlet on its rear panel for connecting the...
Page 31 - Auto Power On/Standby; Connecting Onkyo
31 Connecting Your Components —Continued With (Remote Interactive) you can use the following special functions: Auto Power On/Standby When you start playback on a component connected via , if the AV receiver is in Standby, it will turn on and select that component as the input source automatically. ...
Page 32 - Turning On; ON; Turning On the AV Receiver; To turn on the subwoofer, press its [POWER] switch to the ON position; Smooth Operation in a Few Easy Steps; Have you connected a component to a digital audio input?; TESTING THE SPEAKERS; To test that all of the speakers are working properly,; press the remote controller’s [TEST TONE] button
32 Turning On TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT RT/PTY/ TP MEMORY TUNING MODE RETURN TUNING / PRESET ENTER SETUP STANDBY STANDBY/ON CLEAR PURE AUDIO PHONES MULTl CH DVD VIDEO 1 VIDEO 2 VCR VIDEO 3 TAPE TUNER CD VIDEO VIDEO 3 INPUT AUDIO L R MASTER VOLUME A SPEAKERS B STANDBY/ON MUTI...
Page 33 - First Time Setup
33 First Time Setup To enjoy Dolby Digital and DTS, you must connect your DVD player to the AV receiver by using a digital audio connection (coaxial or optical).With this function, you can assign digital inputs to input sources. For example, if you connect your DVD player to DIGITAL IN OPTICAL 1, yo...
Page 34 - Playing Your AV Components; Basic AV Receiver Operation; DISPLAY; Subwoofer’s; Speaker Set B; Start playback on the source component.
34 Playing Your AV Components Basic AV Receiver Operation TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT RT/PTY/ TP MEMORY TUNING MODE RETURN TUNING / PRESET ENTER SETUP STANDBY STANDBY/ON CLEAR PURE AUDIO PHONES MULTl CH DVD VIDEO 1 VIDEO 2 VCR VIDEO 3 TAPE TUNER CD VIDEO VIDEO 3 INPUT AUDIO L ...
Page 35 - • While the multichannel input is selected, the Speaker; Interpreting Surround Channel Information; B: The number of surround channels (surround left and; Using the Multichannel Input; Displaying Source Information
35 Playing Your AV Components —Continued The multichannel input is for connecting a component with individual 5.1-channel analog audio output jacks, such as a DVD player or MPEG decoder. See page 25 for hookup information. Note: • While the multichannel input is selected, the Speaker Configuration se...
Page 36 - Using the Tuner; • This procedure can also be performed on the remote; Auto Tuning Mode; Listening to the Radio; Use the Up and Down [; TUNING; Tuning into Radio Stations
36 Using the Tuner With the built-in tuner, you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick selection. AM Frequency Step Setup(not North American model) Here you can specify the AM frequency step used in your area. When this setting is changed, all r...
Page 37 - Presetting Radio Stations; select a preset from 1 through 30.; See the previous section.; Listening mode
37 Using the Tuner —Continued Presetting Radio Stations You can store up to 30 of your favorite radio stations as presets. Selecting Preset Stations Deleting Presets Displaying Radio Information 1 Tune into the station that you want to store as a preset. 2 Press the [MEMORY] button. The MEMORY indic...
Page 38 - Common Functions; Bass; press the remote control-; Setting the Display Brightness; MUTING; Adjusting the Bass & Treble
38 Common Functions This chapter explains functions that can be used with any input source. With this function, you can adjust the brightness of the display. You can adjust the bass or treble for the front speakers except when the Direct or Pure Audio (not North Amer-ican model) listening mode is se...
Page 39 - To cancel the sleep timer,; Using the Sleep Timer; Adjusting Speaker Levels
39 Common Functions —Continued With the sleep timer, you can set the AV receiver so that it automatically turns off after a set period. To cancel the sleep timer, press the [SLEEP] button repeatedly until the SLEEP indicator disappears. To check the remaining sleep time, press the [SLEEP] button. No...
Page 40 - Using the Listening Modes; Selecting on the AV receiver; Selecting with the Remote Controller; This button selects the Stereo listening mode.; Selecting Listening Modes
40 Using the Listening Modes See “About the Listening Modes” on page 42 for detailed information about the listening modes. Selecting on the AV receiver ■ [PURE AUDIO] button (not North American model) This button selects the Pure Audio listening mode. When this mode is selected, the AV receiver out...
Page 42 - About the Listening Modes
42 Using the Listening Modes —Continued About the Listening Modes With its built-in surround-sound decoders and DSP pro-grams, the AV receiver can transform your home listen-ing room into a movie theater or concert hall. Direct The selected input source is output directly with minimal processing for...
Page 43 - Onkyo Original DSP Modes
43 Using the Listening Modes —Continued DTS-ES Matrix This is DTS with an added surround back channel for 6.1 surround sound. Use it to provide 6.1 channel surround playback with program material recorded in DTS 5.1 format. Since DTS 5.1 program material contains surround back channel informa-tion, ...
Page 44 - Adjusting the Listening Modes; • The effect of the Late Night function depends on the; SETUP; Using the CinemaFILTER
44 Adjusting the Listening Modes With the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at low volume levels—ideal for watching movies late at night when you don’t want to disturb anyone. Notes: • The effect...
Page 45 - Input Channel Settings
45 Adjusting the Listening Modes —Continued The Audio Adjust functions are explained below. Input Channel Settings ■ Multiplex This setting determines which channel is output from a stereo multiplex source. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcas...
Page 46 - Advanced Setup; Speaker Distance; • The Center and Subwoofer distances can be set up to; Advanced Speaker Settings
46 Advanced Setup Speaker Distance To get the best from surround sound, it’s important that the sound from each speaker reaches the listener at the same time. To achieve this, you need to specify the dis-tance from each speaker to the listening position. Notes: • The Center and Subwoofer distances c...
Page 47 - Speaker Levels; • A quicker way to adjust the speaker levels is to press
47 Advanced Setup —Continued Speaker Levels With this function, you can adjust the volume of each speaker so that all speakers can be heard equally at the listening position. Note: • A quicker way to adjust the speaker levels is to press the remote controller’s [TEST TONE] button to output the test ...
Page 48 - Speaker Configuration; Large; For those with a; Small; • If the Subwoofer setting in step 3 is
48 Advanced Setup —Continued Speaker Configuration This section explains how to specify which speakers are connected and their sizes.For speakers with a cone diameter larger than 6-1/2 inches (16 cm), specify Large . For those with a smaller diameter, specify Small . 1 Press the [RECEIVER] button fol...
Page 49 - Crossover Frequency; select; Speaker cone
49 Advanced Setup —Continued Crossover Frequency To get the best bass performance from your speaker sys-tem, you need to set the crossover frequency according to the size and frequency response of your subwoofer and other speakers (front, center, and surround). Note: • For a more accurate setting, l...
Page 50 - • If noise is produced when fast forwarding or reversing; Digital Input Signal Formats; The DTS or PCM indicator,
50 Advanced Setup —Continued The following table shows the display indicators for each supported digital signal format. Normally, the AV receiver detects the signal format auto-matically. However, if you experience either of the fol-lowing issues when playing PCM or DTS material, you can manually se...
Page 51 - Recording; Prepare the VCR for recording.; Recording the Input Source; Recording from Different AV Sources; Camcorder
51 Recording This chapter explains how to record the selected input source to an AV component with recording capability, and how to record audio and video from two different sources. You can record only to AV components that are con-nected to the TAPE OUT or VIDEO 1 OUT jacks.See pages 22–31 for inf...
Page 52 - Controlling Other Components; • A remote control code cannot be entered for the; Entering Remote Control Codes; L NIGHT; The REMOTE MODE button lights up.
52 Controlling Other Components You can use the AV receiver’s remote controller (RC-608M) to control your other components, including those made by other manufacturers. This chapter explains how to enter the necessary remote control code for the component that you want to control (e.g., DVD player, ...
Page 53 - cable and an analog; Resetting the Remote Controller
53 Controlling Other Components —Continued Onkyo components that are connected via can be controlled by pointing the remote controller at the AV receiver. This means that you can control such compo-nents even if they are out of sight, for example, installed in a rack. If you want to control an Onkyo...
Page 54 - Number buttons; Controlling a TV; Controlling a VCR
54 Controlling Other Components —Continued To control another component, point the remote controller at it and use the buttons explained below. (You must select the appropriate remote control mode first.) A [ON], [STANDBY], TV [ ] Sets the TV to On or Standby. B Number buttons Enter numbers. C TV VOL...
Page 55 - Troubleshooting; Power
55 Troubleshooting If you have any trouble using the AV receiver and speak-ers, look for a solution in this section. If you can’t resolve the issue yourself, contact your Onkyo dealer. Can’t turn on the AV receiver? • Make sure that the power cord is properly plugged into the wall outlet. • Unplug t...
Page 57 - The remote controller doesn’t work?
57 Troubleshooting —Continued The remote controller doesn’t work? • Make sure that the batteries are installed with the cor- rect polarity (page 17). • Make sure that the remote controller is not too far away from the AV receiver, and that there’s no obstruction between the remote controller and the...
Page 58 - Specification; Amplifier Section
58 Specification Amplifier Section Video Section Tuner Section ■ FM ■ AM General ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs Specifications and features are subject to change without notice. ■ AV Receiver (HT-R530) Power Output 2 channel driven: North American: 110 W + 110 W (8 Ω , 1 ...
Page 59 - Speaker
59 Specification —Continued ■ Powered Subwoofer (SKW-530) ■ Front Speaker (SKF-530F) ■ Center Speaker (SKC-530C) ■ Surround Speaker (SKM-530S/SKB-530) Specifications and appearance are subject to change without prior notice. ■ Speaker Type: Bass-reflex Inputsensitivity/impedance: 330 mV / 100 k Ω Maxim...
