Page 2 - Important Safety Instructions; WARNING; AVIS
2 En Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s ...
Page 3 - Precautions; For British models; Declaration of Conformity
3 En Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user-ser- viceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care ...
Page 4 - Supplied Accessories; Make sure you have the following accessories:; Installing the Batteries; Aiming the Remote Controller; Using the Remote Controller
4 En Supplied Accessories Make sure you have the following accessories: * In catalogs and on packaging, the letter at the end of the prod-uct name indicates the color. Specifications and operations are the same regardless of color. Installing the Batteries Note • If the remote controller doesn’t wor...
Page 5 - Contents; Introduction
5 En Contents Important Safety Instructions ......................................... 2Precautions....................................................................... 3Supplied Accessories ...................................................... 4 Using the Remote Controller ..........................
Page 6 - Features; Amplifier
6 En Features Amplifier • 100 Watts/Channel @ 6 ohms (IEC)• Optimum Gain Volume Circuitry• H.C.P.S. (High Current Power Supply) Massive High Power Transformer Processing • HDMI (Ver.1.4 with Audio Return Channel, 3D), Deep- Color, x.v.Color * , Lip Sync, DTS *1 -HD Master Audio, DTS-HD High Resoluti...
Page 7 - Front Panel; b c d e f
7 En Front & Rear Panels The actual front panel has various logos printed on it. They are not shown here for clarity.The page numbers in parentheses show where you can find the main explanation for each item. a ON/STANDBY button ( ➔ 18 ) b STANDBY indicator ( ➔ 18 ) c HDMI THRU indicator ( ➔ 33 ...
Page 8 - For detailed information, see the pages in parentheses.; Display; b c; to
8 En For detailed information, see the pages in parentheses. a A and B speaker indicators ( ➔ 10 , 20 ) b Audio input indicators c Listening mode and format indicators ( ➔ 19 , 25 ) d Tuning indicators ( ➔ 21 ) e RDS indicator ( ➔ 22 ) f SLEEP indicator ( ➔ 20 ) g MUTING indicator ( ➔ 20 ) h Message...
Page 9 - Remote Controller; Controlling the AV Receiver
9 En Remote Controller For detailed information, see the pages in parentheses. a ON/STANDBY button ( ➔ 18 ) b REMOTE MODE / INPUT SELECTOR buttons ( ➔ 19 , 41 to 42 ) c TONE , + and – buttons ( ➔ 36 ) d SP A/B button ( ➔ 10 , 20 ) e Arrow q / w / e / r and ENTER buttons f SETUP button ( ➔ 28 ) g LIS...
Page 10 - About Home Theater; You can use two sets of speakers with the AV receiver:; Speakers A; can be used in another room and offers 2-channel stereo playback.; Speakers A and B
10 En About Home Theater You can use two sets of speakers with the AV receiver: Speakers A and Speakers B . Speakers A should be used in your main listening room for up to 5.1-channel playback. * While Speakers B is on, Speakers A is reduced to 2.1-channel playback. Speakers B can be used in another...
Page 11 - Connecting the AV Receiver; Speaker Configuration; Connecting Your Speakers
11 En Connecting the AV Receiver Speaker Configuration The following table indicates the channels you should use depending on the number of speakers that you have. For 5.1-channel surround-sound playback, you need five speakers and a powered subwoofer. No matter how many speakers you use, a powered ...
Page 12 - Connecting the Speaker Cables; Screw-type speaker terminals
12 En Connecting the Speaker Cables Screw-type speaker terminals Push-type speaker terminals The following illustration shows which speaker should be connected to each pair of terminals. * (HT-S5305) Using the supplied RCA cable, connect the subwoofer’s LINE INPUT jack to your AV receiver’s SUBWOOFE...
Page 13 - About AV Connections; HDMI cable
13 En Connected image with AV components • Before making any AV connections, read the manuals supplied with your AV components.• Don’t connect the power cord until you’ve completed and double-checked all AV connections.• Push plugs in all the way to make good connections (loose connections can cause...
Page 14 - HDMI IN; HDMI OUT; Connecting Components with HDMI
14 En Connect your components to the appropriate jacks. The default input assignments are shown below. ✔ : Assignment can be changed ( ➔ 29 ). Refer to “About HDMI” ( ➔ 49 ) and “Using an RIHD-compatible TV, Player, or Recorder” ( ➔ 50 ). Tip To listen to audio received by the HDMI IN jacks through ...
Page 15 - How to record the video; • With connection; Connecting External Components; Using the AUX INPUT jack on the front panel
15 En Connect your components to the appropriate jacks. The default input assignments are shown below. ✔ : Assignment can be changed ( ➔ 29 ). ■ How to record the video With the connections described here, you cannot record the video through the AV receiver. To make a connection for video recording ...
Page 16 - Connecting Onkyo
16 En With u (Remote Interactive), you can use the following special functions: ■ System On/Auto Power On When you start playback on a component connected via u , if the AV receiver is on Standby, it will automati- cally turn on and select that component as the input source. ■ Direct Change When pla...
Page 17 - Video Connection Formats; Which Connections Should I Use?
17 En The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. Note The on-screen setup menus are displayed when:• There is no video i...
Page 18 - Turning On/Off the AV Receiver; Turning On; or; RECEIVER; The AV receiver comes on, the display lights, and the; STANDBY; Turning Off
18 En Turning On/Off the AV Receiver Turning On ON/STANDBY ON/STANDBY RECEIVER STANDBY indicator Front panel Remote controller Press ON/STANDBY on the front panel. or Press RECEIVER followed by ON/STANDBY on the remote controller. The AV receiver comes on, the display lights, and the STANDBY indicat...
Page 19 - Basic Operations; Playing the Connected Component
19 En Basic Operations ■ Operating on the AV receiver ■ Operating with the remote controller You can display various information about the current input source as follows. Tip • Alternatively, you can use the AV receiver’s DISPLAY . The following information can typically be displayed. *1 When AM or...
Page 20 - Muting the AV Receiver
20 En You can temporarily mute the output of the AV receiver. Tip • To unmute, press MUTING again or adjust the volume. • The Mute function is cancelled when the AV receiver is set to Standby. With the sleep timer, you can set the AV receiver to turn off automatically after a specified period. Tip •...
Page 21 - Listening to the Radio; When tuned into a station, the; Using the Tuner; changes between AM and FM.
21 En Listening to the Radio With the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick selection. Listening to the Radio Tuning into Radio Stations ■ Auto tuning mode When tuned into a station, the TUNED indicator lights. When tuned int...
Page 22 - Selecting Presets; Deleting Presets; Presetting FM/AM Stations
22 En You can store a combination of up to 40 of your favorite FM/AM radio stations as presets. Selecting Presets Tip • You can also use the remote controller’s number buttons to select a preset directly. Deleting Presets When tuned into an RDS station, the RDS indicator lights. What is RDS? RDS sta...
Page 24 - Recording; Connecting a Recording Component; AV Recording; and video from the camcorder; MASTER VOLUME; control has no effect; Prepare the VCR for recording.
24 En Recording This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources. Connecting a Recording Component Note • The AV receiver must be turned on for recording. Recording is not possible while i...
Page 25 - Using the Listening Modes; Listening Mode Buttons; MUSIC button; Explanatory Notes; Input Source; The following audio formats are supported by the listening mode.; Selecting Listening Modes; MUSIC; About Listening Modes
25 En Using the Listening Modes See “About Listening Modes” for detailed information about the listening modes ( ➔ 25 ). Listening Mode Buttons MOVIE/TV button This button selects the listening modes intended for use with movies and TV. MUSIC button This button selects the listening modes intended f...
Page 26 - Speaker Layout; Listening Modes
26 En ■ Speaker Layout The illustration shows which speakers are activated in each channel. See “Sp Config (Speaker Configuration)” for the speaker setup ( ➔ 30 ). Listening Modes Listening Mode Description Input Source Speaker Layout Direct In this mode, audio from the input source is output withou...
Page 27 - Onkyo-Original DSP Listening Modes
27 En Onkyo-Original DSP Listening Modes Note *1 For the Blu-ray Discs, Dolby Digital is used. *2 AV receiver can input the DSD signal from HDMI IN . Setting the output setting on the player side to PCM might obtain a better sound according to the player. In that case, set the output setting on the ...
Page 28 - Advanced Setup; Carry out the settings by using the on-screen display.; On-screen Setup Menus; Common Procedures in Setup Menu; The following menu appears.; RETURN
28 En Advanced Setup Note The on-screen setup menus are displayed when:• There is no video input, or• The video input is 480p, 576p, 720p, 1080i, or 1080p. The on-screen setup menus appear on the connected TV and provide a convenient way to change the AV receiver’s various settings. Settings are org...
Page 29 - COAX; HDMI Input; Yes
29 En Explanatory Notes Menu HDMI Input If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/DVD ” input selector.Here are the default assignme...
Page 30 - Subwoofer; Small; Double Bass
30 En Note • When an HDMI IN is assigned to an input selector in “HDMI Input” ( ➔ 29 ), this input assignment is automatically set to the same HDMI IN . And in addition to the usual inputs (e.g., COAX , etc.), you can also select HDMI inputs. • Available sampling rate for PCM signals from a digital ...
Page 31 - Left; Multiplex/Mono Settings; Panorama; Audio Adjust
31 En ■ Left, Center, Right, Surround Right, Surround Left, Subwoofer ` Specify the distance from the each speaker to your lis-tening position. Note • The speaker distance setting cannot be changed while a pair of headphones is connected, or “ Audio TV OUT ” setting is set to “ On ” ( ➔ 32 ) or Spea...
Page 32 - Remote Control Settings; AM Frequency Setup Settings; Name Edit; Hardware
32 En DTS Setting Neo:6 Music ■ Center Image ` 0 to 2 to 5 With this setting, you can specify by how much the front left and right channel output is attenuated in order to create the center channel. Setting a value “0” in the middle is set to hear a sound. Sound is spread in left and right (the outs...
Page 33 - Power Control
33 En Note • If “ On ” is selected and the signal can be output by the TV, the AV receiver will output no sound through its speakers. • If “ On ” is selected, “ TV Sp On ” appears on the display by pressing DISPLAY . • When “ TV Control ” is set to “ On ” , this setting is fixed to “ Auto ” . • With...
Page 34 - TV Control; Tone Control Settings; Speaker Levels; Late Night Function; Using the Audio Settings
34 En Note • Do not assign the component connected with the HDMI input to the TV/CD selector when you set “ TV Control ” setting to “ On ”. Otherwise, appropriate CEC (Consumer Electronics Con- trol) operation is not guaranteed. • Set to “ Off ” when the TV is not compatible or when it is unclear wh...
Page 35 - Music Optimizer; CinemaFILTER; Audio Selector
35 En Music Optimizer The Music Optimizer function enhances the sound quality of compressed music files. Use it with music files that use “lossy” compression, such as MP3. ■ M.Optimizer ` Off : Music Optimizer off. ` On : Music Optimizer on. Note • The Music Optimizer function only works with PCM di...
Page 36 - See “; Digital Input Signal Formats
36 En The digital input signal formats are available only for the input sources that you have assigned a digital input jack ( ➔ 29 ). Normally, the AV receiver detects the signal format auto-matically. However, if you experience either of the follow-ing issues when playing PCM or DTS material, you c...
Page 37 - Controlling iPod; Models sold are different depending on the region.; Connecting an Onkyo Dock
37 En Controlling iPod Models sold are different depending on the region. Connecting an Onkyo Dock No. Onkyo Dock Cable Note Page A UP-A1 Dock(Universal Port Option Dock) — • When UP-A1 Dock that seated iPod is connected, the power consumption on standby mode slightly increases. • You can control yo...
Page 38 - jack on the AV receiver. While your; • PORT Reading; The AV receiver do not support the connected dock.; RI Dock; Using the Onkyo Dock
38 En UP-A1 Dock With the UP-A1 Dock, you can easily play the music, photo, or movie stored on your Apple iPod through the AV receiver and enjoy great sound.You can use the AV receiver’s remote controller to operate your iPod. ■ Basic Operation Auto Power On If you start iPod playback while the AV r...
Page 39 - Without the RI Control; Controlling Your iPod
39 En Note • Enter the appropriate remote control code before using the AV receiver’s remote controller for the first time ( ➔ 41 ). • Connect the RI Dock to the AV receiver with an u cable ( ➔ 37 ). • Set the RI Dock’s RI MODE switch to “ HDD ” or “ HDD/ DOCK ”. • Set the AV receiver’s Input Displa...
Page 41 - Controlling Other Components; Entering Remote Control Codes
41 En Controlling Other Components You can use the AV receiver’s remote controller (RC-762M) to control your other AV components. This section explains how to enter the remote control code (with the default underlined) for a component that you want to control: DVD, TV, CD, etc. The following REMOTE ...
Page 42 - Resetting REMOTE MODE Buttons
42 En If you want to control an Onkyo component by pointing the remote controller directly at it, use the following remote control codes: ` 32900 : Onkyo Blu-ray Disc player ` 32901 : Onkyo HD-DVD player ` 70868 : Onkyo MD recorder ` 71323 : Onkyo CD recorder ` 82990 : Onkyo Universal Port Option Do...
Page 44 - Troubleshooting; , press and hold down; Power; Audio
44 En Troubleshooting If you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue your-self, contact your Onkyo dealer. ■ Can’t turn on the AV receiver ■ The STANDBY indicator flashes red ■ There’s no sound, or it’s very quiet If you can’t resol...
Page 45 - Video
45 En ■ Only the front speakers produce sound ■ Only the center speaker produces sound ■ The surround speakers produce no sound ■ The center speaker produces no sound ■ The subwoofer produces no sound ■ There’s no sound with a certain signal format ■ Can’t get 5.1 playback ■ The volume cannot be set...
Page 47 - Others
47 En ■ The AV receiver unexpectedly selects your iPod as the input source ■ Can’t record ■ The sound changes when I connect my headphones ■ How do I change the language of a multiplex source ■ The u functions don’t work ■ The following settings can be made for the composite video inputs You must us...
Page 48 - Specifications; Amplifier Section
48 En Specifications Amplifier Section Video Section Tuner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Others Specifications and features are subject to change without notice. Rated Output Power All channels: 1 ch × 100 W at 6 ohms, 1 kHz, 1 ch driven (IEC)...
Page 49 - About HDMI; , so TVs and displays with; Supported Audio Formats
49 En About HDMI Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video compo-nents. Until now, several separate video and audio cab...
Page 50 - Operations that can be performed with
50 En Using an RIHD-compatible TV, Player, or Recorder p , which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of th...
Page 51 - Confirm the settings.; Operate with the remote controller.
51 En ■ How to connect and setup 1 Confirm the connecting and setting. 1. Connect the HDMI OUT jack to the HDMI input jack of the TV. 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable. Note • When the audio return channel (ARC) functio...
