Page 2 - Safety Information and Introduction; Important Safety Instructions; WA R N I N G; AV I S
En-2 Safety Information and Introduction Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in...
Page 3 - Precautions; POWER; For Canadian Models
Safety Information and Introduction En-3 Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, ...
Page 4 - Supplied Accessories; Make sure you have the following accessories:; Installing the batteries; Aiming the remote controller
Safety Information and Introduction En-4 Supplied Accessories Make sure you have the following accessories: * In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color. ■ Installing the batteries Note •...
Page 5 - Table of Contents
Safety Information and Introduction En-5 Table of Contents Safety Information and Introduction Important Safety Instructions ......................................2Precautions ...................................................................3Supplied Accessories.......................................
Page 6 - Features; Amplifier
Safety Information and Introduction En-6 Features Amplifier • 60 Watts/Channel @ 8 ohms (FTC)• Optimum Gain Volume Circuitry• H.C.P.S. (High Current Power Supply) Massive High Power Transformer Processing • HDMI (Audio Return Channel, 3D, DeepColor, x.v.Color, Lip Sync, DTS-HD Master Audio, DTS-HD H...
Page 7 - Front Panel; b c d
Safety Information and Introduction En-7 Front & Rear Panels For detailed information, see the pages in parentheses. a 8 ON/STANDBY button ( 19 ) b HDMI THRU indicator ( 43 ) c SPEAKERS A and B buttons ( 31 ) d Remote control sensor ( 4 ) e LISTENING MODE buttons ( 26 ) f Display ( 8 ) g DIMMER ...
Page 8 - A and B speaker indicators (; Display
Safety Information and Introduction En-8 For detailed information, see the pages in parentheses. a A and B speaker indicators ( 31 ) b M.Opt indicator ( 33 , 45 ) c Listening mode and format indicators ( 26 , 42 ) d Tuning indicators AUTO indicator ( 24 ) TUNED indicator ( 24 ) FM STEREO indicator (...
Page 9 - Rear Panel; to
Safety Information and Introduction En-9 a DIGITAL IN COAXIAL and OPTICAL jacks b COMPONENT VIDEO IN and OUT jacks c HDMI IN and OUT jacks d FM ANTENNA jack and AM ANTENNA terminal e SUBWOOFER PRE OUT jack f SPEAKERS terminals ( FRONT A , CENTER , SURROUND , FRONT B ) g Power cord h u REMOTE CONTRO...
Page 10 - Remote Controller; For detailed information, see the pages in parentheses.; Controlling the AV Receiver
Safety Information and Introduction En-10 Remote Controller For detailed information, see the pages in parentheses. a 8 button ( 19 ) b REMOTE MODE/INPUT SELECTOR buttons ( 20 ) c TONE and Tone Level buttons ( 44 ) d SP A/B button ( 31 ) e q / w / e / r and ENTER buttons f SETUP button ( 35 ) g List...
Page 11 - Connections; Connecting the Speaker Cables; Push-type speaker terminals; Connecting Your Speakers
En-11 Connections Connecting the AV Receiver Connecting the Speaker Cables The following illustration shows how to connect the speakers to each pair of terminals. ■ Push-type speaker terminals Strip 3/8" to 1/2" (10 to 12 mm) of insulation from the ends of the speaker cables, and twist the b...
Page 12 - Speaker Configuration
Connections En-12 Speaker Configuration The following table indicates the channels you should use depending on the number of speakers that you have. No matter how many speakers you use, a powered subwoofer is recommended for a really powerful and solid bass.To get the best from your surround sound s...
Page 13 - Speaker Connection Precautions
Connections En-13 Speaker Connection Precautions Read the following before connecting your speakers:• You can connect speakers with an impedance of between 6 and 16 ohms. If you use speakers with a lower impedance, and use the amplifier at high volume levels for a long period of time, the built-in a...
Page 14 - Connecting AV components; HDMI; About AV Connections; HDMI cable
Connections En-14 Connecting AV components a • Before making any AV connections, read the manuals supplied with your AV components. • Don’t connect the power cord until you’ve completed and double-checked all AV connections. • Push plugs in all the way to make good connections (loose connections can...
Page 15 - HDMI OUT; of; Connecting Components with HDMI
Connections En-15 * If your TV doesn’t support Audio Return Channel (ARC), you need to connect an optical digital cable together with the HDMI cable to the AV receiver. * When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV scree...
Page 16 - How to record a video source; Connecting Your Components
Connections En-16 Connect your components to the appropriate jacks. The default input assignments are shown below.See “Connection Tips and Video Signal Path” for more information ( ➔ page 57 ). ✔ : Assignment can be changed ( ➔ pages 37 , 38 ). Note *1 When USB input is selected, you can input video...
Page 17 - System On/Auto Power On; Connecting Onkyo; Make the; Connecting a Recording Component
Connections En-17 With u (Remote Interactive), you can use the following special functions: ■ System On/Auto Power On When you start playback on a component connected via u while the AV receiver is on standby, the AV receiver will automatically turn on and select that component as the input source. ...
Page 18 - Connecting the Antennas; Assembling the AM loop antenna; • Be careful not to injure yourself when; Connecting the Power Cord; Plug the power cord into an AC wall outlet.
Connections En-18 This section explains how to connect the supplied indoor FM antenna and AM loop antenna.The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. Note • Once your AV receiver is ready for use, you’ll need to tun...
Page 19 - Turning On & Basic Operations; Turning On; or; The AV receiver comes on, and its display lights.; Turning Off; or; RECEIVER
En-19 Turning On & Basic Operations Turning On/Off the AV Receiver Tip • For details on power management settings, see “Auto Standby” ( ➔ page 42 ). 8 ON/STANDBY 8 RECEIVER Turning On 1 Press 8 ON/STANDBY on the front panel. or Press RECEIVER followed by 8 on the remote controller. The AV recei...
Page 20 - Playback; Playing the Connected Component; • “Playing a USB Device” (; MASTER VOLUME
Turning On & Basic Operations En-20 Playback ■ Operating with the remote controller ■ Operating on the AV receiver The on-screen menus appear only on a TV that is connected to the HDMI OUT . If your TV is connected to other video outputs, use the AV receiver’s display when changing settings. Thi...
Page 21 - Controlling Contents of USB Devices; and
Turning On & Basic Operations En-21 Tip • See “Controlling Other Onkyo Components” about the operation of other components ( ➔ page 48 ). Note • The buttons you can use will differ depending on the devices and media used for playback. Controlling Contents of USB Devices j kl h i op n m e g d b a...
Page 22 - Extended Mode Control; Understanding Icons on the Display; ” appears on the AV; ENTER
Turning On & Basic Operations En-22 This section describes icons that appear on the AV receiver’s display during media playback. This section explains how to play music files on the iPod/iPhone.Compatible iPod/iPhone modelsMade for:iPod touch (1st, 2nd, 3rd and 4th generation), iPod classic, iPo...
Page 23 - Playing a USB Device
Turning On & Basic Operations En-23 This section explains how to play music files from a USB device (e.g., USB flash drives and MP3 players).See also:• “USB Features” ( ➔ page 61 ) Note • While the message “ Connecting... ” appears on the AV receiver’s display, do not disconnect the USB cable su...
Page 24 - Using the Tuner; In manual tuning mode, FM stations will be in mono.; Listening to AM/FM Radio; indicator
Turning On & Basic Operations En-24 Using the Tuner With the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick selection.You can also change the frequency steps ( ➔ page 42 ). Tuning into Radio Stations ■ Auto tuning mode ■ Manual tu...
Page 25 - Presetting AM/FM Stations; See the previous section.
Turning On & Basic Operations En-25 Presetting AM/FM Stations You can store a combination of up to 40 of your favorite AM/FM radio stations as presets. ■ Selecting Presets ■ Deleting Presets 1 Tune into the AM/FM station that you want to store as a preset. See the previous section. 2 Press MEMOR...
Page 26 - Using Basic Functions; Selecting Listening Modes; Listening Mode Buttons; Using the Listening Modes; MUSIC
Turning On & Basic Operations En-26 Using Basic Functions Selecting Listening Modes See “About Listening Modes” for detailed information about the listening modes ( ➔ page 27 ). ■ Listening Mode Buttons MOVIE/TV button This button selects the listening modes intended for use with movies and TV. ...
Page 27 - About Listening Modes; Explanatory Notes; Input Source
Turning On & Basic Operations En-27 About Listening Modes The AV receiver’s listening modes can transform your listening room into a movie theater or concert hall, with high fidelity and stunning surround sound. ■ Explanatory Notes a Front speakers b Center speaker c Surround speakers d Subwoofe...
Page 28 - Onkyo-Original DSP Listening Modes
Turning On & Basic Operations En-28 ■ Onkyo-Original DSP Listening Modes Listening Mode Description Input Source Speaker Layout Orchestra *1 Suitable for classical or operatic music, this mode emphasizes the surround channels in order to widen the stereo image, and simulates the natural reverber...
Page 29 - Listening Modes
Turning On & Basic Operations En-29 ■ Listening Modes Listening Mode Description Input Source Speaker Layout Direct In this mode, audio from the input source is output without surround-sound processing. The speaker configuration (presence of speakers) and speaker distance settings are enabled, b...
Page 31 - Using the Home Menu
Turning On & Basic Operations En-31 The Home menu provides quick access to frequently used settings. You can change settings and view the current information. Note • The on-screen menus are displayed when: – There is no video input, or– The video input is 480p, 576p, 720p, 1080i, or 1080p. Note ...
Page 32 - Using the Sleep Timer; indicator lights on the AV receiver’s; Setting the Display Brightness
Turning On & Basic Operations En-32 With the sleep timer, you can set the AV receiver to turn off automatically after a specified period. You can adjust the brightness of the AV receiver’s display. You can display various information about the current input source as follows. The following infor...
Page 33 - Changing the Input Display; GAME; Using the Music Optimizer; MUSIC OPTIMIZER; Muting the AV Receiver
Turning On & Basic Operations En-33 When you connect an u -capable Onkyo component, you must configure the input display so that u can work properly.This setting can be done only from the front panel. The Music Optimizer function enhances the sound quality of compressed music files. You can temp...
Page 34 - AV Recording; Using Headphones; PHONES; Recording; control has no effect
Turning On & Basic Operations En-34 This section explains how to record the selected input source to a component with recording capability. AV Recording Audio sources can be recorded to a recorder (e.g., cassette tape deck, CDR, MD recorder). Video sources can be recorded to a video recorder (e....
Page 35 - Advanced Operations; Common Procedures in Setup Menu; RETURN; Menu
En-35 Advanced Operations On-screen Setup The setup menus provides a convenient way to change the AV receiver’s various settings. Settings are organized into 10 categories. Note • The on-screen menus are displayed when: – There is no video input, or– The video input is 480p, 576p, 720p, 1080i, or 10...
Page 36 - Setup menu items
Advanced Operations En-36 Setup menu items Menu item Setting target HDMI Input ( ➔ page 37 ) BD/DVD VCR/DVR CBL/SAT GAME AUX TV/CD Component ( ➔ page 37 ) BD/DVD VCR/DVR CBL/SAT GAME AUX TV/CD Digital Audio ( ➔ page 38 ) BD/DVD VCR/DVR CBL/SAT GAME AUX TV/CD Sp Config ( ➔ page 38 ) Subwoofer Front C...
Page 37 - HDMI Input
Advanced Operations En-37 Menu HDMI Input If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/DVD ” input selector.Here are the default assign...
Page 38 - Large
Advanced Operations En-38 Menu Digital Audio If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to the OPTICAL IN 1 , you must assign “ OPTICAL1 ” to the “ TV/CD ” input selector. Here are the default assig...
Page 39 - Double Bass; Unit; Left
Advanced Operations En-39 Note • For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly. • Choose a higher crossover frequency if you want more sound from your subwoofer. ■ Double Bass ` On ` Off Turn this setting on to boost bass o...
Page 40 - Dolby; Audio Adjust
Advanced Operations En-40 Menu Audio Adjust With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. Multiplex/Mono ■ Multiplex Input Ch (Mux) ` Main ` Sub ` Main/Sub This setting determines which channel of a stereo multiplex source is output. Use it t...
Page 41 - Preset Name For Input Selector; Source Setup
Advanced Operations En-41 Items can be set individually for each input selector. Menu Source Setup A/V Sync ■ A/V Sync ` 0 ms to 400 ms in 10 msec steps When using progressive scanning on your Blu-ray Disc/DVD player, you may find that the picture and sound are out of sync. With this setting, you ca...
Page 42 - OSD; Tuner; Auto Standby; Hardware
Advanced Operations En-42 Setting the Incoming Digital Signal (Fixed Mode) ■ Fixed Mode ` Off : The format is detected automatically. If no digital input signal is present, the corresponding analog input is used instead. ` PCM : Only 2-channel PCM format input signals will be heard. If the input sig...
Page 43 - HDMI Through; HDMI Setup
Advanced Operations En-43 Menu HDMI Setup ■ HDMI Ctrl (RIHD) ` Off ` On Turn this setting on to allow p -compatible components connected via HDMI to be controlled by the AV receiver ( ➔ page 58 ). Note • When the setting is set to “ On ” and the menu is closed, the names of connected p -compatible c...
Page 44 - Tone Control; Audio Return Ch; Using the Audio Settings
Advanced Operations En-44 ■ Audio Return Ch (ARC) ` Off ` Auto : The audio signal from your TV tuner can be sent to the HDMI OUT of the AV receiver. The audio return channel (ARC) function allows an ARC capable TV to send the audio stream to the HDMI OUT of the AV receiver. To use this function, you...
Page 45 - Late Night; Music Optimizer; CinemaFILTER; Cinema Filter
Advanced Operations En-45 Late Night ■ Late Night For Dolby Digital and Dolby Digital Plus sources, the options are: ` Off ` Low : Small reduction in dynamic range. ` High : Large reduction in dynamic range. For Dolby TrueHD sources, the options are: ` Auto : The Late Night function is set to “ On ”...
Page 46 - Controlling Other Components; If you press the remote controller’s; standby; , the AV receiver will; Using the Onkyo Dock
En-46 Controlling Other Components iPod/iPhone Playback via Onkyo Dock RI Dock With the RI Dock, you can easily play the music of your iPod/iPhone, or watch the slideshows and videos of your iPod/iPhone on a TV. In addition, the on-screen display (OSD) allows you to view, navigate, and select your i...
Page 47 - REMOTE MODE; With the RI Control; Controlling Your iPod/iPhone
Controlling Other Components En-47 By pressing the REMOTE MODE button that’s been programmed with the remote control code for your Dock, you can control your iPod/iPhone in the Dock with the buttons described further in this section.See “Entering Remote Control Codes” for details on entering a remot...
Page 48 - Entering Remote Control Codes
Controlling Other Components En-48 Controlling Other Onkyo Components You can use the AV receiver’s remote controller to control your other Onkyo AV components. This section explains how to enter the remote control code for a component that you want to control: DVD, CD, etc. The following REMOTE MOD...
Page 49 - Resetting the REMOTE MODE Buttons
Controlling Other Components En-49 Controlling Onkyo components without u If you want to control an Onkyo component by pointing the remote controller directly at it, or you want to control an Onkyo component that’s not connected via u , use the following remote control codes: ` 30627 : Onkyo DVD pla...
Page 50 - button that’s been; DVD player operation
Controlling Other Components En-50 By pressing the REMOTE MODE button that’s been programmed with the remote control code for your component, you can control Onkyo component as described below.For details on entering a remote control code for other components, see “Entering Remote Control Codes” ( ➔...
Page 51 - CD player / CD recorder / MD recorder operation
Controlling Other Components En-51 ■ CD player / CD recorder / MD recorder operation ■ Cassette tape deck operation Note • With some components, certain buttons may not work as expected, and some may not work at all. • See “Controlling Your iPod/iPhone” about the operation of iPod/iPhone ( ➔ page 47...
Page 52 - Appendix; Troubleshooting; . “Clear” will appear on the AV; , press and hold down; HOME; . If your TV is connected; Audio
En-52 Appendix Troubleshooting If you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue yourself, contact your Onkyo dealer. ■ Can’t turn on the AV receiver ■ The AV receiver turns off unexpectedly ■ The AV receiver turns off and after restor...
Page 54 - Video
Appendix En-54 ■ There’s no picture ■ There’s no picture from a source connected to an HDMI IN ■ The on-screen menus don’t appear ■ Reception is noisy, FM stereo reception is noisy, or the FM STEREO indicator doesn’t light ■ The remote controller doesn’t work ■ Can’t control other components ■ There...
Page 55 - • Video Attenuation
Appendix En-55 ■ The AV receiver’s remote controller doesn’t control my iPod/iPhone ■ The AV receiver unexpectedly selects my iPod/iPhone as the input source ■ iPod/iPhone doesn’t work properly ■ Can’t record ■ Can’t access the music files on a USB device ■ Standby power consumption ■ The sound chan...
Page 57 - IN
Appendix En-57 Connection Tips and Video Signal Path The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. Note • The on-screen set...
Page 58 - TV; For
Appendix En-58 Using an RIHD-compatible TV, Player, or Recorder p , which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is p...
Page 59 - How to connect and setup; HDMI IN 1
Appendix En-59 ■ How to connect and setup 1 Confirm the connecting and setting. 1. Connect the HDMI OUT jack to the HDMI input jack of the TV. 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable. Note • When the audio return channel (ARC...
Page 60 - About HDMI; , so TVs and displays; Supported Audio Formats
Appendix En-60 About HDMI Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video components. Until now, several separate video and a...
Page 61 - USB Features; • USB mass storage device class (but not always; between 48 kbps and 320 kbps are supported.; USB Device Requirements
Appendix En-61 USB Features • USB mass storage device class (but not always guaranteed). • FAT16 or FAT32 file system format.• Up to 255 folders can be displayed, and folders may be nested up to 8 levels deep. • USB hubs and USB devices with hub functions are not supported. Note • If the media you c...
Page 63 - Specifications; Amplifier Section
Appendix En-63 Specifications Amplifier Section Video Section Tuner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Others Specifications and features are subject to change without notice. Rated Output Power All channels: 60 watts minimum continuous power per c...
