Page 2 - Introduction; Important Safety Instructions; WARNING; AVIS
2 En Introduction Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the ma...
Page 3 - Precautions; For Canadian Models
3 En Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user-ser- viceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care ...
Page 4 - Supplied Accessories; Make sure you have the following accessories:; Installing the Batteries; Aiming the Remote Controller; Using the Remote Controller
4 En Supplied Accessories Make sure you have the following accessories: * In catalogs and on packaging, the letter at the end of the prod-uct name indicates the color. Specifications and operations are the same regardless of color. Installing the Batteries Note • If the remote controller doesn’t wor...
Page 5 - Contents
5 En Contents Important Safety Instructions ......................................... 2Precautions....................................................................... 3Supplied Accessories ...................................................... 4 Using the Remote Controller ..........................
Page 6 - Features; Amplifier
6 En Features Amplifier • 60 Watts/Channel @ 8 ohms (FTC)• Optimum Gain Volume Circuitry• H.C.P.S. (High Current Power Supply) Massive High Power Transformer Processing • HDMI (Ver.1.4 with Audio Return Channel, 3D), Deep- Color, x.v.Color * , Lip Sync, DTS *1 -HD Master Audio, DTS-HD High Resolutio...
Page 7 - Front Panel; b c d e f
7 En Front & Rear Panels The actual front panel has various logos printed on it. They are not shown here for clarity.The page numbers in parentheses show where you can find the main explanation for each item. a ON/STANDBY button ( ➔ 18 ) b STANDBY indicator ( ➔ 18 ) c HDMI THRU indicator ( ➔ 32 ...
Page 8 - For detailed information, see the pages in parentheses.; Display; b c; to
8 En For detailed information, see the pages in parentheses. a A and B speaker indicators ( ➔ 10 , 20 ) b Audio input indicators c Listening mode and format indicators ( ➔ 19 , 24 ) d Tuning indicators ( ➔ 21 ) e SLEEP indicator ( ➔ 20 ) f MUTING indicator ( ➔ 20 ) g Message area a DIGITAL IN COAXIA...
Page 9 - Remote Controller; Controlling the AV Receiver
9 En Remote Controller For detailed information, see the pages in parentheses. a ON/STANDBY button ( ➔ 18 ) b REMOTE MODE / INPUT SELECTOR buttons ( ➔ 19 ) c TONE , + and – buttons ( ➔ 35 ) d SP A/B button ( ➔ 10 , 20 ) e Arrow q / w / e / r and ENTER buttons f SETUP button ( ➔ 27 ) g LISTENING MODE...
Page 10 - About Home Theater; You can use two sets of speakers with the AV receiver:; Speakers A; can be used in another room and offers 2-channel stereo playback.; Speakers A and B
10 En About Home Theater You can use two sets of speakers with the AV receiver: Speakers A and Speakers B . Speakers A should be used in your main listening room for up to 5.1-channel playback. * While Speakers B is on, Speakers A is reduced to 2.1-channel playback. Speakers B can be used in another...
Page 11 - Connections; Connecting the AV Receiver; Speaker Configuration; Connecting Your Speakers
11 En Connections Connecting the AV Receiver Speaker Configuration The following table indicates the channels you should use depending on the number of speakers that you have. For 5.1-channel surround-sound playback, you need five speakers and a powered subwoofer. No matter how many speakers you use...
Page 12 - Connecting the Speaker Cables; Screw-type speaker terminals; Connecting a Powered Subwoofer; Using a suitable cable, connect the AV receiver’s; WOOFER PRE OUT; jack to an input on your pow-; SUBWOOFER PRE OUT; jack to an input on
12 En Connecting the Speaker Cables Screw-type speaker terminals Using Banana Plugs • If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.• Do not insert the speaker code directly into the center hole of the speaker terminal. Push-type speaker terminals The f...
Page 13 - About AV Connections; HDMI cable
13 En Connected image with AV components • Before making any AV connections, read the manuals supplied with your AV components.• Don’t connect the power cord until you’ve completed and double-checked all AV connections.• Push plugs in all the way to make good connections (loose connections can cause...
Page 14 - HDMI IN; HDMI OUT; Connecting Components with HDMI
14 En Connect your components to the appropriate jacks. The default input assignments are shown below. ✔ : Assignment can be changed ( ➔ 28 ). Refer to “About HDMI” ( ➔ 48 ) and “Using an p -compatible TV, Player, or Recorder” ( ➔ 49 ). Tip To listen to audio received by the HDMI IN jacks through yo...
Page 15 - How to record the video; • With connection; Connecting External Components; Using the AUX INPUT jack on the front panel
15 En Connect your components to the appropriate jacks. The default input assignments are shown below. ✔ : Assignment can be changed ( ➔ 28 ). ■ How to record the video With the connections described here, you cannot record the video through the AV receiver. To make a connection for video recording ...
Page 16 - Connecting Onkyo
16 En With u (Remote Interactive), you can use the following special functions: ■ System On/Auto Power On When you start playback on a component connected via u , if the AV receiver is on Standby, it will automati- cally turn on and select that component as the input source. ■ Direct Change When pla...
Page 17 - The on-screen setup menus are displayed when:; Video Connection Formats; Which Connections Should I Use?
17 En The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. Note The on-screen setup menus are displayed when: • There is no video ...
Page 18 - Turning On & Basic Operations; Turning On/Off the AV Receiver; Turning On; or; The AV receiver comes on, the display lights, and the; STANDBY; RECEIVER
18 En Turning On & Basic Operations Turning On/Off the AV Receiver Turning On Press ON/STANDBY on the front panel. or Press RECEIVER followed by ON/STANDBY on the remote controller. The AV receiver comes on, the display lights, and the STANDBY indicator goes off. Turning Off Press ON/STANDBY on ...
Page 19 - Basic Operations; Playing the Connected Component
19 En Basic Operations ■ Operating on the AV receiver ■ Operating with the remote controller You can display various information about the current input source as follows. Tip • Alternatively, you can use the AV receiver’s DISPLAY . The following information can typically be displayed. *1 When AM or...
Page 20 - Muting the AV Receiver
20 En You can temporarily mute the output of the AV receiver. Tip • To unmute, press MUTING again or adjust the volume. • The Mute function is cancelled when the AV receiver is set to Standby. With the sleep timer, you can set the AV receiver to turn off automatically after a specified period. Tip •...
Page 21 - Listening to the Radio; Using the Tuner
21 En Listening to the Radio With the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick selection.This model changes FM/AM frequency in 200/10kHz (or 50/9kHz) steps ( ➔ 31 ). Listening to the Radio Tuning into Radio Stations ■ Auto tunin...
Page 22 - Selecting Presets; Deleting Presets; Presetting FM/AM Stations; See the previous section.
22 En You can store a combination of up to 40 of your favorite FM/AM radio stations as presets. Selecting Presets Tip • You can also use the remote controller’s number buttons to select a preset directly. Deleting Presets Presetting FM/AM Stations 1 Tune into the FM/AM station that you want to store...
Page 23 - Recording; Connecting a Recording Component; AV Recording; and video from the camcorder; MASTER VOLUME; control has no effect; Prepare the VCR for recording.
23 En Recording This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources. Connecting a Recording Component Note • The AV receiver must be turned on for recording. Recording is not possible while i...
Page 24 - Using the Listening Modes; Listening Mode Buttons; MUSIC button; Explanatory Notes; Input Source; The following audio formats are supported by the listening mode.; Selecting Listening Modes; MUSIC; About Listening Modes
24 En Using the Listening Modes See “About Listening Modes” for detailed information about the listening modes ( ➔ 24 ). Listening Mode Buttons MOVIE/TV button This button selects the listening modes intended for use with movies and TV. MUSIC button This button selects the listening modes intended f...
Page 25 - Speaker Layout; Listening Modes
25 En ■ Speaker Layout The illustration shows which speakers are activated in each channel. See “Sp Config (Speaker Configuration)” for the speaker setup ( ➔ 29 ). Listening Modes Listening Mode Description Input Source Speaker Layout Direct In this mode, audio from the input source is output withou...
Page 26 - Onkyo-Original DSP Listening Modes; • The listening modes cannot be selected with some source formats.
26 En Onkyo-Original DSP Listening Modes Note *1 For the Blu-ray Discs, Dolby Digital is used. *2 AV receiver can input the DSD signal from HDMI IN . Setting the output setting on the player side to PCM might obtain a better sound according to the player. In that case, set the output setting on the ...
Page 27 - Advanced Operations; Advanced Setup; On-screen Setup Menus; Common Procedures in Setup Menu; RETURN
27 En Advanced Operations Advanced Setup Note The on-screen setup menus are displayed when: • There is no video input, or• The video input is 480p, 576p, 720p, 1080i, or 1080p. The on-screen setup menus appear on the connected TV and provide a convenient way to change the AV receiver’s various setti...
Page 28 - COAX; HDMI Input; Yes
28 En Explanatory Notes Menu HDMI Input If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/DVD ” input selector.Here are the default assignme...
Page 29 - Subwoofer; Small; Double Bass
29 En Note • When an HDMI IN is assigned to an input selector in “HDMI Input” ( ➔ 28 ), this input assignment is automatically set to the same HDMI IN . And in addition to the usual inputs (e.g., COAX , etc.), you can also select HDMI inputs. • Available sampling rate for PCM signals from a digital ...
Page 30 - Left; Multiplex/Mono Settings; Panorama; Audio Adjust
30 En ■ Left, Center, Right, Surround Right, Surround Left, Subwoofer ` Specify the distance from the each speaker to your lis-tening position. Note • The speaker distance setting cannot be changed while a pair of headphones is connected, or “ Audio TV OUT ” setting is set to “ On ” ( ➔ 31 ) or Spea...
Page 31 - Remote Control Settings; FM/AM Frequency Setup Settings; Name Edit; Hardware
31 En DTS Setting Neo:6 Music ■ Center Image ` 0 to 2 to 5 With this setting, you can specify by how much the front left and right channel output is attenuated in order to create the center channel. Setting a value “0” in the middle is set to hear a sound. Sound is spread in left and right (the outs...
Page 32 - Power Control
32 En Note • If “ On ” is selected and the signal can be output by the TV, the AV receiver will output no sound through its speakers. • If “ On ” is selected, “ TV Sp On ” appears on the display by pressing DISPLAY . • When “ TV Control ” is set to “ On ” , this setting is fixed to “ Auto ” . • With...
Page 33 - TV Control; Tone Control Settings; Speaker Levels; Late Night Function; Using the Audio Settings
33 En Note • Do not assign the component connected with the HDMI input to the TV/CD selector when you set “ TV Control ” setting to “ On ”. Otherwise, appropriate CEC (Consumer Electronics Con- trol) operation is not guaranteed. • Set to “ Off ” when the TV is not compatible or when it is unclear wh...
Page 34 - Music Optimizer; CinemaFILTER; Audio Selector
34 En Music Optimizer The Music Optimizer function enhances the sound quality of compressed music files. Use it with music files that use “lossy” compression, such as MP3. ■ M.Optimizer ` Off : Music Optimizer off. ` On : Music Optimizer on. Note • The Music Optimizer function only works with PCM di...
Page 35 - See “; Digital Input Signal Formats
35 En The digital input signal formats are available only for the input sources that you have assigned a digital input jack ( ➔ 28 ). Normally, the AV receiver detects the signal format auto-matically. However, if you experience either of the follow-ing issues when playing PCM or DTS material, you c...
Page 36 - Controlling iPod & Other Components; Controlling iPod; Models sold are different depending on the region.; Connecting an Onkyo Dock
36 En Controlling iPod & Other Components Controlling iPod Models sold are different depending on the region. Connecting an Onkyo Dock B A *1 No. Onkyo Dock Cable Note Page A UP-A1 Dock(Universal Port Option Dock) — • When UP-A1 Dock that seated iPod is connected, the power consumption on stand...
Page 37 - jack on the AV receiver. While your; • PORT Reading; The AV receiver do not support the connected dock.; RI Dock; Using the Onkyo Dock
37 En UP-A1 Dock With the UP-A1 Dock, you can easily play the music, photo, or movie stored on your iPod through the AV receiver and enjoy great sound.You can use the AV receiver’s remote controller to operate your iPod. ■ Basic Operation Auto Power On If you start iPod playback while the AV receive...
Page 38 - Without the RI Control; Controlling Your iPod
38 En ■ System Function System On When you turn on the AV receiver, RI Dock and iPod turn on automatically. In addition, when the RI Dock and iPod are on, the AV receiver can be turned on by pressing ON/ STANDBY . Auto Power On If you press the remote controller’s 1 while the AV receiver is on Stand...
Page 40 - Controlling Other Onkyo Components; Entering Remote Control Codes
40 En Controlling Other Onkyo Components You can use the AV receiver’s remote controller (RC-762M) to control your other Onkyo AV components. This section explains how to enter the remote control code (with the default underlined) for a component that you want to control: DVD, CD, etc. The following...
Page 41 - Resetting REMOTE MODE Buttons
41 En If you want to control an Onkyo component by pointing the remote controller directly at it, use the following remote control codes: ` 32900 : Onkyo Blu-ray Disc player ` 32901 : Onkyo HD-DVD player ` 70868 : Onkyo MD recorder ` 71323 : Onkyo CD recorder ` 82990 : Onkyo Dock Note • If you conne...
Page 43 - Others; Troubleshooting; , press and hold down; Power; Audio
43 En Others Troubleshooting If you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue your-self, contact your Onkyo dealer. ■ Can’t turn on the AV receiver ■ The STANDBY indicator flashes red ■ There’s no sound, or it’s very quiet If you can’...
Page 44 - Video
44 En ■ Only the front speakers produce sound ■ Only the center speaker produces sound ■ The surround speakers produce no sound ■ The center speaker produces no sound ■ The subwoofer produces no sound ■ There’s no sound with a certain signal format ■ Can’t get 5.1 playback ■ The volume cannot be set...
Page 46 - • Video Attenuation; This setting can be made for the; GAME; Gain is reduced by 2 dB.
46 En ■ The following settings can be made for the composite video inputs You must use the buttons on the unit to make these set-tings. 1. While holding down the input selector button for the input source that you want to set, press SETUP . 2. Use e / r to change the setting. 3. Press the input sele...
Page 47 - Specifications; Amplifier Section
47 En Specifications Amplifier Section Video Section Tuner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Others Specifications and features are subject to change without notice. Rated Output Power All channels: 60 watts minimum continuous power per channel, 8...
Page 48 - About HDMI; , so TVs and displays with; Supported Audio Formats
48 En About HDMI Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video compo-nents. Until now, several separate video and audio cab...
Page 49 - Operations that can be performed with
49 En Using an RIHD-compatible TV, Player, or Recorder p , which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of th...
Page 50 - Confirm the settings.; Operate with the remote controller.
50 En ■ How to connect and setup 1 Confirm the connecting and setting. 1. Connect the HDMI OUT jack to the HDMI input jack of the TV. 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable. Note • When the audio return channel (ARC) functio...
Page 51 - Memo
