Oliveri SB35GM - User Manual
Oliveri SB35GM Sink – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
SPECTRA Care Instructions
SPECTRA Installation Instructions
IT IS HIGHLY RECOMMENDED THAT THE ACTUAL SINK BE PRESENT AT TIME OF INSTALLATION
Template supplied in carton is for undermount installation only.
For topmount installation see www.oliverisinks.com or use the below dimensions:
PLEASE LEAVE FOR THE HOME OWNER
DO’S
• Coloured sinks should only be cleaned with soapy water and a
soft cloth or sponge, then rinsed and towelled dry.
• The colouring is a solid coating (Physical Vapour Deposit) on the
surface of the stainless steel only - harsh scratching should be
avoided.
• It is highly recommended to use the wire bowl protector provided
with the sink, to protect the bottom of the bowl
DONT’S
• Never use steel wool in or on the sink (steel wool should be
avoided with any stainless steel sink, as it can leave steel deposits
on the sink, which can cause rust).
• Never use harsh abrasive cleaning pads to clean coloured sinks.
• Never use harsh chemicals or bleaches to clean coloured sinks.
• Do not store harsh chemical (acids, chlorines, bleaches etc.) under
the sink, as the vapours (even from the closed containers) can
cause rusting on the underside of the stainless steel sinks.
• Avoid prolonged contact with ordinary steel containers (e.g. tin
cans), as these can rust and stain the sink.
• Avoid prolonged exposures to acids from fruit, fruit juices, salts,
tea bags etc., as these may leave stains.
• Avoid leaving liquid soaps, hand sanitizing liquids etc. to dry on
the surface of the sink, as these may leave stains.
Any advice, recommendation, information, assistance or service provided by Tasman Sinkware in
relation to goods manufactured by it or their use and installation, is given in good faith and is believed by
Tasman Sinkware to be appropriate and reliable. However, any advice, recommendation, information,
assistance or service is provided by Tasman Sinkware without responsibility or liability.
TF153b - Spectra Installation and Care Instructions.pdf
CHECK MODEL
The model number on the sink
packaging must match the model
of sink the customer ordered.
Do not install if incorrect.
AVOID CUTS
The perimeter and punch-outs on
the sink may contain sharp edges.
Handle the sink carefully to avoid
personal injury.
CHECK THE CONDITION
Inspect the sink for any visible
defects. Do not install the sink if
defects are found. Contact your
sink retailer / point of purchase.
AVOID SCRATCHES
Stainless steel can be scratched
if proper care is not taken during
installation.
TOPMOUNT CUTOUT
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
