Oki ML8810n - Manual

Oki ML8810n

Oki ML8810n – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 2 – Installation: Rear Mount; The Cut Sheet Feeder can only be mounted at
  • Page 4 – For Narrow Paper:; Load Paper; Pull the stacker toward the front of
  • Page 5 – Select the Cut Sheet Feeder as the; second line of the display.
  • Page 6 – Déballez le dispositif d'alimentation de feuilles; Préparation de l’imprimante:; Ouvrez le coiuvercle
  • Page 7 – Installation: Montage arrière; Le dispositif d'alimentation de feuilles
  • Page 9 – Chargement du papier; Montage arrière seulement:
  • Page 10 – Sélectionnez le dispositif; Appuyez sur SEL pour mettre l'imprimante hors
  • Page 11 – Desempaque el Cut Sheet Feeder [Alimentador de; Preparación de la impresora:; Abra la tapa del; Alimentador de hojas sueltas (CSF), Instrucciones de Instalación
  • Page 12 – Instalación: Montaje trasero
  • Page 14 – Cargue papel; Montaje trasero únicamente:
  • Page 15 – Seleccione el Cut Sheet Feeder
  • Page 16 – papel normal; Vista frontal; Desembale o alimentador de folhas avulsas. Retire; Prepare a impressora:; Abra a cobertura da; Alimentador de folhas avulsas (CSF), Instruções de instalação
  • Page 18 – Instalação: traseira
  • Page 19 – Colocação do papel; Apenas na instalação traseira:
  • Page 20 – Selecione o alimentador de folhas; A impressora mudará o percurso e voltará a ficar em
Loading the manual

1

The Cut Sheet Feeder (CSF) option can be mounted on
the front or the rear of the printer, but can only be
mounted on the rear if the optional Rear Push Tractor is

not installed.
The CSF stacker takes up to 100 sheets of 20-lb.
(75 g/m

2

) paper.

Front View

1 Rear Sheet Supports
2 Paper Guides
3 Paper Set Lever
4 Center Guides
5 Guide Roller
6 Hopper Roller
7 Stacker

Rear View

1 Lock Levers
2 Connecting Cable

Installation: Front Mount

1. Unpack the cut sheet feeder. Remove the shipping

materials.

2. Turn off the printer.
3.

Prepare the printer:

Open the gear cover (1) on the

printer until it is vertical, then let it slide down into the
housing. Slide the paper guide (2) as far to the right as
it will go.

4. Hold the CSF with the back facing you, and place the

U-shaped brackets (1) at either end on the shafts (2) at
either end of the printer sheet feed platform. Gently
lower the CSF into place.

F6_02.jpg

F6_03.jpg

Front F6_04.jpg

Front F6_05.jpg

English

Cut Sheet Feeder Installation Instructions

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Português . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Installation: Rear Mount; The Cut Sheet Feeder can only be mounted at

2 5. Plug the cable into the connector on the left side of the printer. 6. Install the center guides and rear sheet supports. Install the center guides by snapping them onto the round shaft (1), then securing the top hooks to the square shaft (2). Install the rear supports by sliding them onto the s...

Page 4 - For Narrow Paper:; Load Paper; Pull the stacker toward the front of

4 For Narrow Paper: For Cards: 8. Turn on the printer.9. Slide the stacker (1) you removed in Step 4 into the four guides (2) on the CSF. 10. Allumez l'imprimante. Load Paper 1. Rear Mount Only : Pull the stacker toward the front of the printer. 2. Move the paper lever to the RESET position. 3. Unlo...

Page 5 - Select the Cut Sheet Feeder as the; second line of the display.

5 4. Adjust the position of the paper guides (1) to fit the print media you are using, then re-lock the levers. 5. Fan and straighten the print media, and place it in the CSF. 6. Gently move the paper lever to the SET position. 7. Rear Mount Only : Push the stacker back. Select the Cut Sheet Feeder ...

Other Oki Models

All Oki Other