Oki JET 2500 - Manual

Table of Contents:

• Page 2 – English; Copyright 1998 by Oki. All rights reserved.; Energy Star
• Page 3 – User’s Guide; Contents
• Page 4 – Safety Instructions
• Page 6 – Control Panel Buttons and Indicators; Note: If the Power/Reset button is pressed during the print
• Page 7 – Power LED; Note: This function is operational only when the Power LED
• Page 8 – Error LED; Note: When the red Error LED is lit, the printer is in an error; Low Ink Indicators
• Page 9 – Print Head Care; Note: If your printer has never had a Print Head installed, refer; Press the Cartridge Change/Clean button on the control panel.; Caution: Ensure that the green Carriage Lock Lever is STILL in
• Page 10 – Note: The Print Head must be stored in the Print Head Storage
• Page 11 – Replacing ink cartridges; Always use genuine Oki consumables. Some
• Page 12 – Caution: Do not force fit the Ink Cartridge into the Print Head.; Print head storage box; Note: It is strongly recommended that the Print Head be stored
• Page 13 – Caution: D o n o t t o u c h t h e u n c o v e r e d P r i n t H e a d w h e n; Transporting the printer; Caution: To avoid damage to the printer, do not pour or spray
• Page 14 – Selecting Printer Options; Accessing printer settings; Note: The application may override any options that are selected; From within your WindowsTM application:
• Page 15 – Spool manager; To release the documents for printing, perform the following:; Troubleshooting; Clearing paper misfeeds; The red Error Light will be lit to indicate a paper jam.; Remove all paper from the Paper Tray.
• Page 16 – Clearing paper jams; If the trailing edge is accessible; Remove the Paper Output Shelf.; Remove the jammed sheet of paper from the printer.
• Page 17 – Reinstall the Paper Output Shelf.; Clear multi-page paper jams
• Page 18 – Problem Solving; Printer Power LED does not turn on; No power from outlet.; Printer output does not reflect the options selected
• Page 19 – Data is sent but not printed; Check the interface cable and replace if damaged.; Error light turns on; Remove and reinstall the Print Head.
• Page 20 – Error light flashes; Replace the Ink Cartridge.; Print is faint or missing; Reload with fresh paper.
• Page 21 – Blurry, or jagged vertical lines; Turn the paper over to print on the other side.; Print image is clipped or off edge of print media; Adjust margins in the application as necessary.; Paper is not feeding properly; Align the left edge of the paper with the Left Paper; Low Ink Indicators ON
• Page 22 – Low Ink Indicators blinking; Replace Ink Cartridge.; Paper does not stack neatly in the Output Shelf; The Star Wheel assembly bar has become disengaged.; Poor print quality when printing on transparencies; ‘Transparency’ is not selected as the Media.
• Page 23 – Selecting plain paper and media; Paper size; Selecting speciality print media; Selecting and Ordering Supplies; Ordering supplies; Item
• Page 24 – Envelope size
• Page 25 – Technical Data; Printing system
• Page 26 – Printer Specifications
• Page 28 – Printable area; Warranty Information; For warranty information for your OKIJET
• Page 29 – Packaging for return to a Service Centre; With the original box and packaging:; Without the original box and packaging; Printer; Note: Please do not ship the Power Cable, Printer Cable, Printer
• Page 30 – Note: The loose fill should be compressed to ensure minimal
• Page 31 – Appendix A; Envelopes; Remove any print media from the Paper Tray.
• Page 32 – Other media; Note: For print media specifications, see ‘Selecting and order-
• Page 33 – Appendix B
• Page 35 – Reinstall the ink cartridges in the printhead and install the; Press and release the Cartridge Change/Clean button. Close; Your printer is now ready for use.
• Page 36 – Index
• Page 37 – Oki Systems Company