Oki CX3641 MFP - Manual

Oki CX3641 MFP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1

2

3

4

5

6

7

8

9

10

11

12

Page: / 12 Go to

Next Page

PDF Text Table of Contents

Table of Contents:

• Page 3 – The Fax Driver Software; Installing the FAX Driver Software; To load the software from the CD:; To download the FAX driver:; The Fax Board Defaults; To Send a Fax from your Computer; Fax Board Specifications
• Page 4 – Installation de la carte de télécopieur; Installation de la carte de; Note; Composants
• Page 5 – Télécopieur autonome
• Page 6 – Logiciel du pilote de télécopie; Installation du logiciel du pilote de télécopie; Pour lancer le logiciel depuis le CD :; Pour télécharger le logiciel du pilote de télécopie; Paramètres par défaut de la carte de; Envoi d'une télécopie depuis votre; Spécifications de la carte de
• Page 7 – Nota; Componentes
• Page 9 – Software del controlador del fax; Instalación del Software del controlador del; Para cargar el software desde el CD:; Para bajar el controlador del fax:; Valores predeterminados de la tarjeta fax; Envío de Faxes desde su Computadora; Especificaciones de la tarjeta fax
• Page 12 – Software do driver do fax; Instalação do software do driver do FAX; Para instalar o software a partir do CD:; Para baixar o driver do FAX:; Configurações padrão da placa de fax; Envio de fax a partir do computador; Especificações da placa de fax

Loading the manual

CX3641MFP

English . . . 1

Français . . . 4

Español . . . 7

Português . . . 10

1

Fax Board Installation ___________________

Install the Fax Board in the Unit

Note

The fax board requires firmware server version

1.1 or higher. See “Version:” under

Server Info

in the CX3641 MFP Configuration printout.

Components

1

Fax Board

4

Ferrite Core

2

Screws (3)

5

FCC Label

3

Telephone cord

1. Press and hold the

SHUTDOWN/RESTART button

on the printer control panel,

and wait for the shutdown

process to complete.

2. Turn off the scanner (on/off switch is on the

back right), then turn off the printer.

3. If the optional finisher is installed, open the

release latch and pull it away from the printer.

4. Remove the two thumbscrews from the bumper

brackets holding the printer unit to the stand,

and gently pull the printer out to gain access to

the back panel.

5. Loosen the two thumb screws (1) and open the

access door.

6. Insert the fax board into the printer on the

lower right side.

1

Other Oki Models

• Oki C7000 Series
  • Manual
• Oki 59296702
  • Manual
• Oki 9650dn
  • Manual
• Oki ML 280
  • Manual
• Oki 86
  • Manual
• Oki OL610EPS
  • Manual
• Oki PM4410
  • Manual
• Oki 425D
  • Manual
• Oki C5250
  • Manual
• Oki C5200
  • Manual