Page 3 - Overview; Contents
Overview | User’s Guide 3 Contents Introduction ................................................................. 5 Components ........................................................................... 5 Network print server ............................................................. 5Adapter Car...
Page 5 - Introduction; Components; Network Print Driver
Overview | User’s Guide 5 Introduction The OKILAN 7100e+ Network Print Server enables Ethernetnetwork users to use an OKIFAX 5700/5900 Series fax machine(OKIFAX 5700, 5750, 5780, 5900, 5950, and 5980) as a networkprinter. In this environment, you can print documents from thefax machine even while se...
Page 6 - OKI Print Monitor Utility
6 Network print server | OKI Print Monitor Utility The OKI Print Monitor Utility enables printing from aWindows 95, 98 or NT server. OKI Print Monitor provides youwith bi-directional communication over a network. HP JetAdmin and Web JetAdminSupport While Hewlett-Packardís JetAdmin or Web JetAdmin ma...
Page 9 - Network Print Server Part Names
| User’s Guide: English 9 Network Print Server Part Names 100BASE-TX/10BASE-T Connector This should be connected using a twisted pair cable.Switching between 100BASETX and 10BASE-T isautomatic. STAT Light (red LED) Flashes when the network print server receives data. If thenetwork print server detec...
Page 14 - IP Address Setup
14 Network print server | Setting Up the Network PrintServerUsing the Front Panel (LCDDisplay) You can configure the IP Address, Subnet Mask and Gatewayaddress for the network print server from the fax machineísfront panel. The front panel procedure is described below. IP Address Setup ! When printi...
Page 16 - Enter; Submit
16 Network print server | ! Notes: Operation with any web browser other than the abovecannot be guaranteed. The printer must be connected to the network via TCP/IP and configured with a valid IP address. To change the configurations, log in as a ìrootî user. The password for a ìrootî user when using...
Page 17 - Settings; Network Connection
| User’s Guide: English 17 Settings ! Only some of the following settings may be applicableto your specific network environment. Network Connection Protocol Option–Lets you enable/disable each protocol. Frame Options–Lets you set the frame type of the network. TCP/IP Settings DHCP/BOOTP–For the IP a...
Page 18 - NDS
18 Network print server | NDS Tree Name–In print server mode, enter the name of the tree in which the file server is located. Maximum length: 31characters. Context–In print server mode, enter the name of the context in which the Print Server was created. Maximum length:77 characters. For example, LA...
Page 19 - SNMP Settings; Printer Menu; Connecting Using TCP/IP
| User’s Guide: English 19 SNMP Settings MIB-II Category Authentic Community–Sets the authentic community name. Maximum length: 15 characters. Trap Community–Enter the trap community name. Maximum length: 15 characters. Trap IP Address–Enter the trap notice address. If the IP address is 0.0.0.0, tra...
Page 20 - Connecting One Printer and One Computer; Using Telnet
20 Network print server | Connecting One Printer and One Computer If you are constructing a small-scale LAN linking one printerand one computer, you can use the following settings, butplease make sure that it is not connected to another network.PC Address : 192.168.0.1(fixed)Subnet Mask : 255.255.25...
Page 22 - Message
22 Network print server | Please select(1 - 2)? _1 [prn1]Ready Please select(1 - 2)? _2 [system]MLETB07 Version 1.0.0TCP/IP statusIP address : 192.168.20.127Subnet Mask : 255.255.255.0Gateway addr : 192.168.20.254NetWare statusNWPrint mode : FailedEtherTalk statusZone Name : *Type Name : LaserWriter...
Page 23 - NetWare setup screen
| User’s Guide: English 23 7 : DefaultTTL :255 8 : EnableAuthenTrap :2 99 : Back to prior menu Please select (1 - 99)? _ NetWare setup screen Select [3] on the Main Screen to display this screen.Configure if using NetWare.Please select (1-99)? _3No. Message Value 1 : NetWare protocol : ENABLE 2 : Pa...
Page 24 - NetWare remote printer mode setup screen; Printer port setup screen
24 Network print server | NetWare remote printer mode setup screen Select [5] on the NetWare Setup Screen to display this screen.Configure if using NetWare remote printer mode.Please select (1-99)? _5No. Message Value 1 : PSERVER name 1 : “” 2 : PSERVER name 2 : “” 3 : PSERVER name 3 : “” 4 : PSERVE...
Page 25 - Banner output; Resetting the fax machine
| User’s Guide: English 25 10 : Page length(line.) : 66 11 : Banner output : NO 99 : Back to prior menu Please select (1 - 99)? _ Printer trap setup screen Select [7] on the Main Screen to display this screen.Configure the printer trap.Please select (1-99)? _7No. Message Value 1 : Trap enable : DISA...
Page 26 - Windows Printing; Add Printer Driver; Printer Driver
Overview 26 Network print server | Windows Printing Overview This section contains instructions on how to set up yourNetwork print server for a Microsoft Networking environment.To print from a Windows 95/98, Windows NT Server 4.0 orWindows NT Workstation 4.0 (hereafter, Windows NT4.0)TCP/IP network,...
Page 28 - OKI Print Monitor; Yes; Next
28 Network print server | 2 Click OKI Print Monitor . The following screen appears: This screen tells you what you should do prior to theinstallation. 3 Click Next . The License Agreement appears. This screen prompts you to agree to the conditions shownon the screen. 4 Click Yes . This screen prompt...
Page 31 - Add the LPR Port; Search; OK
| User’s Guide: English 31 Add the LPR Port 1 After the OKI Print Monitor is installed, theport setting function is activated. Enter the IP address or host name of the print server. If youclick Search , the list of OKI Device printers on the network appears. Select the OKI device from the list (mach...
Page 33 - Task Tray
| User’s Guide: English 33 Pop-Up Monitor Task Tray The Pop-Up Monitor shows current printer status on yourcomputer screen. When active, the Pop-Up Monitor resides in the Task Tray. Ifyou have already designated the printer(s) to be monitored,the printer status and the host name (or just the IP addr...
Page 34 - Monitor Screen; To minimize the monitor, click X in the upper right corner.
34 Network print server | To add an IP address, enter the new IP address in the box nextto Add and click Add. The maximum number of IP addressesthat can be monitored is 16. If you wish to delete an IP address, enter that IP address in thesearch list next to Delete and click Delete. Monitor Screen Th...
Page 35 - Setup Dialog
| User’s Guide: English 35 Setup Dialog The setup dialog lets you select a print server to monitor, setthe Pop-Up Monitor configuration and screen relatedsettings. Status Monitoring In this screen, you can select the print server you wish tomonitor. You cannot select the IP address that is alreadyse...
Page 36 - Display
36 Network print server | Pop-Up Conditions In this screen, you can set the conditions under which thePop-Up Monitor pops up or is minimized to an icon. If you check an item inside the Launch PopUp Monitorupon frame, the Pop-Up Monitor automatically pops up whenthe printer being monitored enters the...
Page 38 - Novell NetWare; About NetWare; Print Server Mode
Overview 38 Network print server | Novell NetWare Introduction ! This section is for NetWare administrators with a basic knowledge of NetWare and its operating procedures. Wesuggest you read this in conjunction with the NovellNetWare Documentation . This section contains instructions and information...
Page 39 - Bindery Printing; Select Q-Server as the Print Server Type.
| User’s Guide: English 39 This mode uses the standard NetWare print function(PSERVER.NLM). The existing print server can be used. ForPSERVER.NLM, the file server functions as a print server. Bindery Printing This connection method is common with NetWare 3.x, but isalso supported by NetWare 4.x and ...
Page 40 - or click New Queue to create a; Verifying that the Printer is Connected
40 Network print server | 9 Highlight the server you created and click Add/Delete Queue. The Add Queue dialog appears. 10 Check the desired queue or click New Queue to create a new queue and click OK. 11 Click Apply. 12 Click OK. 13 Click Yes to reset the printer. ! The fax machine must be reset for...
Page 41 - The Printer Properties dialog appears.
| User’s Guide: English 41 2 Highlight the new target machine, then double-click it. The Printer Properties dialog appears. 3 Click Novell. 4 Select Q-Server as the Print Server Type. 5 Highlight NDS. 6 Click Modify Name or use the default name (recommended). 7 Click Change Context. 8 In the Set and...
Page 42 - Setting up the Clients; Double click Network Neighborhood on the clients.
42 Network print server | Setting up the Clients Take the following steps to set up the network printers onyour clients. These steps are the same for both Bindery andNDS connections for Windows 95/98 and NT4.0 operatingsystems. 1 Double click Network Neighborhood on the clients. 2 Browse to the Prin...
Page 43 - Troubleshooting
| User’s Guide: English 43 Troubleshooting This section describes typical problems when using theNetwork print server and tips for solving them. ! DIP switches cannot be accessed when the fax machineis assembled. Disassembly must be performed to accessthe card. Switches must be switched off when don...
Page 44 - User name in banner page; Problems printing via NetWare
44 Network print server | • Check the fax machine port name for the network print server. The port name may be selected from lp, euc andsjis. Any other name is invalid. If you print via the printerdriver, you should select “lp.” • Check that the network print server responds to a ping. • Check that ...
Page 45 - Remote printer mode; Fax machine does not print
| User’s Guide: English 45 The fax machine is recognized by utilitybut cannot establish connection withNetWare server Remote printer mode • Check that the print server for which the unit has been registered has been started up. • Check that the correct print server name has been selected. Check that...
Page 46 - If the EEPROM check result is NG.
46 Network print server | Problems printing self diagnosticstest and configuration Fax machine does not print • Check that DIP switches 3 (configuration printing) and 4 (self-diagnostics testing) have been turned on. Turn the fax machine off before changing the DIP switch settings. • If the fax mach...
Page 47 - Network print server Status Lights
| User’s Guide: English 47 LINK 100M Light (green LED, center)Lights when the NETWORK PRINT SERVER is connected using 100BASE-TX. LINK 10M Light (green LED, near cable)Lights when the NETWORK PRINT SERVER is connected using 10BASE-T. Network print server Status Lights Three status lights (LED’s) on ...
Page 48 - Specifications
48 Network print server | Specifications CPU: NEC V53A 20MHz Network Interface: 100BASE-TX or 10BASE-T Network Protocol: IPX/SPX (NetWare) Remote printer modePrint server mode EtherTalkTCP/IPNetBEUI Functions: Banner printing function (FTP, LPD)Kanji filter function (FTP, LPD)
Page 49 - Index
Overview | User’s Guide 49 Index A Adapter Card 5adding LPR port 31 C Components 5configuration page, printing 14configuration problems 46Configuring the Network Print Server introduction 11using OKIVIEW 32 11using TCP/IP 19using Telnet 20using the OKIFAX front panel 14using the Web Page 15 F front ...
