Page 3 - Organization; Contents; Section I: Hardware Installation
iii Organization and Contents OKI OkiLAN 6010e User’s Guide Organization This manual has been divided into five sections. Section Icontains installation instructions for the OkiLAN 6010ePocket Print Server. Section II contains information about management features,an extremely valuable set of OkiLAN...
Page 4 - Section V: Windows Printing
iv Organization and Contents OKI OkiLAN 6010e User’s Guide Section III: NetWare Chapter 1: Introduction ................................................... III-5Chapter 2: OkiNet for NetWare ....................................... III-8Chapter 3: OkiNet for NDS .........................................
Page 5 - Network Operating Systems; Overview; Novell NetWare
v Network Operating Systems OKI OkiLAN 6010e User’s Guide Network Operating Systems Overview OkiLAN 6010e simultaneously supports several networkprotocols in various combinations. Below is a list of sup-ported network protocols accompanied with NOS/OSrequirements. Novell NetWare Novell NetWare versi...
Page 6 - Service Information; OKIDATA Online
vi Technical Support OKI OkiLAN 6010e User’s Guide Service Information This information is valid for the United States andCanada only . OKIDATA Online Visit the OKIDATA Web Site athttp://www.okidata.com for the latest information on: • Software drivers • Product guides • Customer support • Corporate...
Page 8 - Faxable Facts; Product data brochures; OKIDATA SERVICE CENTERS; If you need to ship your; UNITED STATES and CANADA
viii Technical Support OKI OkiLAN 6010e User’s Guide Faxable Facts You can have product and support information faxedautomatically to you through Okidata’s Faxable Facts,an online document retrieval system. A touch-tonetelephone and facsimile machine with a designatedtelephone number are required.Ca...
Page 10 - Serial Number
x Technical Support OKI OkiLAN 6010e User’s Guide When you call Customer Support Center, the followinginformation will help us answer your questions morequickly and accurately. Please be able to identify thefollowing: • Serial Number • Configuration sheet settings • Type of network cable connected t...
Page 13 - In This Section
Har d ware Installation I - 3 Section I - Hardware Installation OKI OkiLAN 6010e User’s Guide In This Section Powering On the OkiLAN 6010e .................. I-7Printing a Configuration Sheet ...................... I-8
Page 15 - Installing the OkiLAN 6010e
Har d ware Installation I - 5 Section I - Hardware Installation OKI OkiLAN 6010e User’s Guide The OkiLAN 6010e Pocket Print Server enablesEthernet network users to connect to a printer with abidirectional parallel port. The OkiLAN 6010e can bemade to work with any centronics or IEEE-1284 paral-lel i...
Page 16 - Secure the OkiLAN 6010e with the wire clips on
I - 6 Section I - Hardware Installation OKI OkiLAN 6010e User’s Guide 3. Secure the OkiLAN 6010e with the wire clips on the printer’s connector. 4. Plug the power adapter wire into the power jack on the OkiLAN 6010e. Then plug the power adapterinto a wall outlet.
Page 17 - Attach the 10Base-T UTP cable to the receptacle on; Powering On the OkiLAN 6010e; Status indicator
Har d ware Installation I - 7 Section I - Hardware Installation OKI OkiLAN 6010e User’s Guide 5. Attach the 10Base-T UTP cable to the receptacle on the back of the OkiLAN 6010e.Attach the other end of the cable to the Network. Powering On the OkiLAN 6010e Turn printer power on. The status indicator ...
Page 18 - Printing a Configuration Sheet
I - 8 Section I - Hardware Installation OKI OkiLAN 6010e User’s Guide Note: If Status Indicator does not display as indicatedabove, see Hardware Troubleshooting at the end ofthis section. Printing a Configuration Sheet To print configuration information, press the Test buttonon the side of the OkiLA...
Page 19 - Select the utility group for the network environment; proper location for installation, then click Install.; Windows Utility Groups:; NetWare Management Utilities
Har d ware Installation I - 9 Section I - Hardware Installation OKI OkiLAN 6010e User’s Guide Installing the OkiLAN UtilitiesSoftware in Windows 1. Insert the OkiLAN CD into your CD-ROM drive.2. The Setup screen appears automatically (if it doesn’t, click Start → Run, then enter D:\setup, if “D” is ...
Page 20 - TCP/IP Management Utilities; Hardware Troubleshooting; Status Indicator
I - 10 Section I - Hardware Installation OKI OkiLAN 6010e User’s Guide TCP/IP Management Utilities OkiNet Utilities for TCP/IPOkiNet Alert for TCP/IPOkidata MIBBootP Server Note: The OkiLAN Utilities CD is designed for morethan one type of OkiLAN print server and includesfeatures that do not apply t...
Page 21 - b) Verify the cable is a 10Base-T cable and it has an
Har d ware Installation I - 11 Section I - Hardware Installation OKI OkiLAN 6010e User’s Guide Solutiona) Unplug the OkiLAN 6010e power adapter from the wall outlet. Remove the network cable. Plug thenetwork cable back in until you hear a positiveclick. Check the other end of the cable in the samema...
Page 22 - b) The OkiLAN 6010e power supply has failed or
I - 12 Section I - Hardware Installation OKI OkiLAN 6010e User’s Guide Failing the self test can be caused by any of the follow-ing:a) The printer is malfunctioning. Unplug the OkiLAN 6010e from the printer and unplug the poweradapter. Reconnect the OkiLAN 6010e and thepower adapter. If the OkiLAN 6...
Page 25 - Installing a Windows NT Printer for the
Ad v anced Mana g ement II - 3 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide In This Section Chapter 1: SNMP ................................. II-5 Overview ...................................................... II-5Private MIB .................................................
Page 26 - Chapter 5: Additional Management
II - 4 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide Reset .......................................................... II-22OkiLAN 6010e Server Discovery ............. II-23Troubleshooting ......................................... II-24 Chapter 5: Additional Management Featu...
Page 27 - HP OpenView; Private MIB
Ad v anced Mana g ement II - 5 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide Chapter 1: SNMP Overview Simple Network Management Protocol (SNMP) pro-vides network administrators with the ability to com-municate management functions between an SNMPmanager and an SNMP agent. A...
Page 28 - Traps
II - 6 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide The setting of certain variables causes an immediatefirmware reset. These variables are listed in the privateMIB under cmdReset. Note: If you attempt a reset while a job is printing, thejob may not print successfully. Cer...
Page 29 - Security
Ad v anced Mana g ement II - 7 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide The OkiLAN 6010e sends printer traps when there is achange in the status of the printer. If the printer goesoff-line, runs out of paper or is detached, the adminis-trator will be notified via the O...
Page 31 - Chapter 2: HP JetAdmin Support; Software Requirements; Windows 95 or Windows NT; Note: For more information on installing and using; From the main JetAdmin screen, select the; Select the NetWare tab and click on the
Ad v anced Mana g ement II - 9 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide Chapter 2: HP JetAdmin Support Overview This section contains instructions and information onhow to configure and obtain diagnostic informationfrom your OkiLAN 6010e using the Hewlett-PackardJetAdm...
Page 32 - WARNING: Do not use both OkiNet and JetAdmin
II - 10 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide 5. If you are running a NetWare 4.x network, click the NetWare Directory Services iconfrom the left column. Select NDS TreeName from the pull-down menu and enterthe Print Server Context. 6. Click the Queues icon from the...
Page 33 - Obtaining Diagnostic Information Using JetAdmin; Note: For JetAdmin to function correctly with the
Ad v anced Mana g ement II - 11 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide Obtaining Diagnostic Information Using JetAdmin 1. From the main JetAdmin screen, select the OkiLAN 6010e port on which you wish toview diagnostic information. 2. Select Properties from the Device...
Page 34 - From the main Web JetAdmin page, select
II - 12 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide Chapter 3: HP Web JetAdminSupport Overview This section contains instructions and information onhow to configure, install, and obtain diagnostic infor-mation from your OkiLAN 6010e using the Hewlett-Packard Web JetAdmin ...
Page 38 - Connecting to the OkiLAN 6010e
II - 16 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide Connecting to the OkiLAN 6010e 1. Enter <http://HTTP Address> in thebrowser address prompt. The HTTP address can be the IP address,the System Name if the print server hasbeen configured to use WINS, or theDNS name ...
Page 39 - A successful connection will display the
Ad v anced Mana g ement II - 17 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide 2. A successful connection will display the print server home page. Note: By default, only Status and Supportinformation can be viewed. To configure theprint server, see the Configuration section....
Page 40 - Configuration; Select the Login as Admin link under the; enter the User name and Password.; Select the Submit Changes button at the
II - 18 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide Configuration 1. Select the Login as Admin link under the Configuration menu. 2. On the Enter Network Password screen, enter the User name and Password. The default administrator User name isadmin. The default administra...
Page 41 - A Request Results page will appear indicat-
Ad v anced Mana g ement II - 19 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide 5. A Request Results page will appear indicat- ing one of the following: • Configuration Successfully Set: Thevalues have been successfully saved tothe print server. Go to another page tocontinue ...
Page 43 - Status
Ad v anced Mana g ement II - 21 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide • Custom Link Title – This field is useful forsetting up a link to an internal help desk. Ifconfigured, it will appear under the Supportmenu. Will accommodate up to 24 charac-ters. • Custom Link U...
Page 44 - Reset
II - 22 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide UpdatesBy default this link will connect you to the firmwareupdate location on the Okidata FTP Server. This linkcan be configured to point to other locations by select-ing the Admin(Web) link under the Configurationmenu....
Page 45 - OkiLAN 6010e Server Discovery; Select Save View to HTML under the File
Ad v anced Mana g ement II - 23 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide OkiLAN 6010e Server Discovery An HTML file containing links to all OkiLAN 6010eprint servers on the network can be created using theOkiNet utility for TCP/IP. Complete the following stepsto create...
Page 46 - Troubleshooting; Server Connection
II - 24 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide Troubleshooting Server Connection • The print server only supports two simulta-neous HTTP connections. If your browserfails to connect to the print server, thebrowser may be trying to open more thantwo connections. Pleas...
Page 47 - Login
Ad v anced Mana g ement II - 25 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide Login • If you forget the administrator password,restoring the TCP/IP protocol to factorydefaults from any other configuration utilityrestores the Web admin name and passwordto default values. Con...
Page 48 - OkiNet Alert
II - 26 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide Chapter 5: Additional ManagementFeatures OkiNet Alert OKI OkiNet Alert enterprise management utility allowsadministrators to proactively manage printers by beingimmediately alerted to printing problems before theyare enc...
Page 49 - OkiNet for NDS
Ad v anced Mana g ement II - 27 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide OkiNet for NDS OkiNet for NDS allows administrators to create andmanage OKI print server objects in the NDS tree.OkiNet for NDS integrates into Novell’s NetWareAdministrator, NetWareAdmin. For mor...
Page 50 - Windows Printing
II - 28 Section II - Advanced Management Features OKI OkiLAN 6010e User’s Guide Windows Printing From a Windows operating system, using TCP/IP orDLC protocols, the OkiNet Connect utility routes theprint job to the appropriate printer without passingthrough a file server or print queue. This cuts dow...
Page 51 - NetWare
Page 54 - Installing OkiNet for NDS for Novell
III - 4 Section III - NetWare OKI OkiLAN 6010e User’s Guide Modifying View Settings .......................... III-24Permanently Defining SNMP Access Information .......................................... III-27 Chapter 3: OkiNet for NDS ............... III-29 Overview .................................
Page 55 - Chapter 1: Introduction
NetW are III - 5 Section III - NetWare OKI OkiLAN 6010e User’s Guide Chapter 1: Introduction Overview This section contains instructions and information onhow to configure your OkiLAN 6010e in the NetWareenvironment. There are two environments in which to configure theOkiLAN 6010e: • Bindery (NetWar...
Page 58 - Chapter 2: OkiNet for NetWare; OkiNet for NetWare allows you to:; Running OkiNet for NetWare
III - 8 Section III - NetWare OKI OkiLAN 6010e User’s Guide Chapter 2: OkiNet for NetWare Overview This chapter contains information about how to config-ure the OkiLAN 6010e in Bindery and NDS environ-ments using the OkiNet for NetWare utility. Note: OkiNet for NetWare contains minimal NDSconfigurat...
Page 59 - Select the OkiLAN 6010e you wish to
NetW are III - 9 Section III - NetWare OKI OkiLAN 6010e User’s Guide By default, the All Print Servers view is selected and allprint servers attached to the network from which theOkiNet utility is running are listed. Configuring the OkiLAN 6010e UsingOkiNet for NetWare The following steps outline ho...
Page 60 - NetWare Configuration Options
III - 10 Section III - NetWare OKI OkiLAN 6010e User’s Guide The following settings are configurable based on thecapabilities of the OkiLAN 6010e: • NetWare• NetWare Queues• NetWare Port• TCP/IP• Protocols• Output Port• SNMP• SNMP Traps NetWare Configuration Options To configure options specific to ...
Page 61 - Bindery Settings
NetW are III - 11 Section III - NetWare OKI OkiLAN 6010e User’s Guide PServer or RPrinter ModeSeveral factors should be considered when choosingbetween PServer or RPrinter mode. For more detailedinformation regarding these modes, see page III-4. Bindery Settings • Default File Server – The default f...
Page 62 - NetWare Queues Configuration Options
III - 12 Section III - NetWare OKI OkiLAN 6010e User’s Guide Example:cn=marketinglj.ou=marketing.o=companyname where cn is the Common Name of the leaf object, ou isthe Organizational Unit name, and o is the Organiza-tional name. Note: After any change to the servicing of queues forthe OkiLAN 6010e f...
Page 63 - TCP/IP Configuration Options
NetW are III - 13 Section III - NetWare OKI OkiLAN 6010e User’s Guide TCP/IP Configuration Options To modify configuration settings specific to the TCP/IPprotocol such as IP address, subnet mask and defaultgateway. For specific information on TCP/IP configura-tion options, see Section IV, TCP/IP, or...
Page 66 - SNMP Configuration Options
III - 16 Section III - NetWare OKI OkiLAN 6010e User’s Guide SNMP Configuration Options SNMP options specify which information is necessaryfor an SNMP manager to access the OkiLAN 6010e.The system variables are for user convenience and areoptional. SNMP community names are used as passwords toGET an...
Page 67 - Fill in the following information:
NetW are III - 17 Section III - NetWare OKI OkiLAN 6010e User’s Guide Fill in the following information: System NameEnter the name of your choice. This name will identifythe OkiLAN 6010e in your SNMP-based managementprogram. System ContactEnter any information useful to a user if problems withthe Ok...
Page 68 - SNMP Traps Configuration
III - 18 Section III - NetWare OKI OkiLAN 6010e User’s Guide Trap Community NameEnter the community name which will be used whentraps are sent from the OkiLAN 6010e. This settingallows trap utilities to only accept traps from deviceswith appropriate community names. The Trap community name field is ...
Page 69 - Trap Destination
NetW are III - 19 Section III - NetWare OKI OkiLAN 6010e User’s Guide Fill in the following information: ProtocolSelect the protocol for which you wish to configure trapinformation. Trap Destination • NetWare Protocol – Enter the network number andhardware address, respectively, to which traps willb...
Page 70 - Saving the Configuration
III - 20 Section III - NetWare OKI OkiLAN 6010e User’s Guide Printer TrapsSelect the printer traps to be activated. The followingprinter conditions may cause a printer trap to occur: • On-line • Off-line • No Printer Attached • Paper Out • Toner Low • Paper Jam • Door Open • Printer Error Note: Tone...
Page 72 - Restoring Factory Default Settings
III - 22 Section III - NetWare OKI OkiLAN 6010e User’s Guide Restoring Factory Default Settings To restore the OkiLAN 6010e to factory default set-tings, select the OkiLAN 6010e from the list of avail-able print servers. From the Print Server menu bar,select the Reset option. Choose one or more of t...
Page 73 - Creating Customized Views
NetW are III - 23 Section III - NetWare OKI OkiLAN 6010e User’s Guide Creating Customized Views OkiNet for NetWare allows users to create multiplecustomized views for the list of OkiLAN 6010e prod-ucts. By creating different views, the user can narrowthe information displayed to that which is of hig...
Page 74 - Modifying View Settings; Filter By
III - 24 Section III - NetWare OKI OkiLAN 6010e User’s Guide Modifying View Settings Before modifying the settings, select the name of theview you wish to edit from the Name field. Display FilterThe filter option displays only those print serversmatching specific criteria. The print server list can ...
Page 75 - Mode; To select all desired print servers, select Add.
NetW are III - 25 Section III - NetWare OKI OkiLAN 6010e User’s Guide Mode The NetWare mode theprint server is running Network # The IPX network number Search FilterThe Search option defines the criteria for locatingOkiLAN 6010e products on the network. • Search Local Network – This method searches ...
Page 76 - Select the first column in the Columns
III - 26 Section III - NetWare OKI OkiLAN 6010e User’s Guide ColumnsColumn information for each print server can be modi-fied. To define the location of a new column, select thelocation in the Columns Displayed field where you wishthe new column to be inserted, then select Add. If nolocation is sele...
Page 79 - Chapter 3: OkiNet for NDS
NetW are III - 29 Section III - NetWare OKI OkiLAN 6010e User’s Guide Chapter 3: OkiNet for NDS Overview OkiNet for NDS is a Dynamic Link Library (DLL)which allows users to create and manage OKI printserver objects in the NDS tree. OkiNet for NDS inte-grates into Novell’s NetWare Administrator, a Wi...
Page 81 - Login to the directory tree as a user with
NetW are III - 31 Section III - NetWare OKI OkiLAN 6010e User’s Guide Installing OkiNet for NDS for NovellNetWare 4.1 A single installation is required to service Windows 3.xand Windows 95 operating systems with OkiNet forNDS for Novell NetWare 4.1. OkiNet for NDS must beinstalled in the same locati...
Page 85 - Creating a New OkiLAN 6010e Object; From the Class of New Object list box,
NetW are III - 35 Section III - NetWare OKI OkiLAN 6010e User’s Guide Creating a New OkiLAN 6010e Object To create a new OkiLAN 6010e object from Novell’sNetWare Administrator, perform the following steps: 1. Select the container (also known as organi- zational unit) in which you want the objectcrea...
Page 86 - From the list of OKI devices, select a device
III - 36 Section III - NetWare OKI OkiLAN 6010e User’s Guide 6. Click OK. Note: If the Device list box is still empty,select Find Device. This will allow you tolocate the specific device you are trying todefine. You will be prompted for theEthernet address and network number of thedevice. A mismatch...
Page 89 - Removing the OKI Print Server Class
NetW are III - 39 Section III - NetWare OKI OkiLAN 6010e User’s Guide The following settings are configurable: • Identification • Network Protocols • Assignments • Port Configuration • Network Configuration • Status For specific information about these detail pages, selectthe HELP button. Adding or ...
Page 93 - Configuring the Discovery UDP Port
TCP/IP IV - 3 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Running OkiNet for TCP/IP ..................... IV-29Configuring the OkiLAN 6010e Using OkiNet for TCP/IP ............................... IV-30 Configuring TCP/IP Options .................... IV-31NetWare and NetWare Port Configuration ...
Page 94 - Specify the Subnet Mask for Your; Appendix B: Application; Configuring the OkiLAN 6010e IP Address
IV - 4 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Changing the Password (Option 2) .......... IV-55Specify Print Server IP Address (Option 3) ............................................ IV-55 Specify the Subnet Mask for Your Network (Option 4) ............................. IV-56 Identify Def...
Page 95 - Configuring HP-UX v9.xx for Printing with the
TCP/IP IV - 5 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Configuring HP-UX v9.xx for Printing with the OkiLAN 6010e .................................... IV-84 Configuring HP-UX v10.xx for Printing with the OkiLAN 6010e .............................. IV-89 Configuring SCO UNIX for Printing wit...
Page 96 - Manual arp table entry and ping
IV - 6 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Chapter 1: Introduction Overview This section contains instructions and information onhow to configure your OkiLAN 6010e. You will also beinstructed on how to set up your host computers to printto the OkiLAN 6010e using the TCP/IP protocol. Ok...
Page 97 - Network Preparation
TCP/IP IV - 7 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Network Preparation • You should be familiar with network admin-istration as well as the physical setup andoperation of your network. • Advise users of possible disruption duringinstallation. • Make sure the serial number and Ethernetad...
Page 98 - Overview of TCP/IP Configuration; Assign an IP address for the OkiLAN 6010e
IV - 8 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Overview of TCP/IP Configuration • Assign an IP address for the OkiLAN 6010e • Configure the OkiLAN 6010e networkinformation • Configure hosts for printing to the OkiLAN6010e • Test print (optional)
Page 99 - Choosing an IP Address; To choose an IP address:
TCP/IP IV - 9 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Chapter 2: Configuring the OkiLAN6010e Choosing an IP Address Every TCP/IP network device is required to have aunique IP address. The IP address can be permanentlystored using one of the following: • OKI OkiNet management utilities for ...
Page 100 - Configuring the OkiLAN 6010e
IV - 10 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide 2. Add the name and IP address to the “/etc/ hosts” file of each host that will access theOkiLAN 6010e. Or, if your network uses aname service, add the host name and IPaddress to the name server. Most TCP/IP networks use the Network Informati...
Page 101 - Assigning the IP Address; Add an entry in the ARP table that assigns
TCP/IP IV - 11 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Assigning the IP Address There are eight different methods for assigning an IPaddress to the OkiLAN 6010e: Gleaning, Static RouteEntry, DHCP, RARP, BOOTP and using the OkiNetutilities. Gleaning, Static Route Entry and RARPrequire the O...
Page 102 - Start a continuous ping to the OkiLAN
IV - 12 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide 2. Start a continuous ping to the OkiLAN 6010e. ping <ip_address> Example: ping 192.168.42.24 On some systems, this may require an additional pa-rameter. Some implementations of ping only send outone ping packet which could get lost in ...
Page 104 - workstation” 0
IV - 14 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Static Route EntryWhen the OkiLAN 6010e is powered on or reset and nopermanent IP address has been assigned, it will attemptto obtain an IP address through Gleaning, RARP,BOOTP or DHCP. If the OkiLAN 6010e has not deter-mined its IP address a...
Page 106 - Other Utilities
IV - 16 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Other Utilities The IP address can also be set from Novell NetWareusing the OkiNet for NetWare utility. Note: The OkiNet for NetWare utilities can only beused if Novell NetWare is installed on your network. Verifying Access to the OkiLAN 6010...
Page 108 - Configuring for TCP/IP Network Printing
IV - 18 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Configuring for TCP/IP Network Printing Most computers that support TCP/IP network printinguse the Remote Line Printer Daemon (LPD) protocol.This protocol was originally part of the Berkeley Soft-ware Distribution (BSD) version of the UNIX op...
Page 109 - FF
TCP/IP IV - 19 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide The OkiLAN 6010e is designed to handle many differ-ent types of printers and print data. Typically you willselect the printer type for your printer in telnet underthe Configure Port option. However, if you are connect-ing to an ASCII p...
Page 110 - NF; Configuring a BSD-Style Print Queue
IV - 20 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide In addition to the form feed described above,the OkiLAN 6010e inserts a carriage-returncharacter into the print job immediatelybefore each line-feed character. This featureis useful for printing UNIX text files. NF Use the NF suffix at the en...
Page 111 - The entry should be similar to the following:
TCP/IP IV - 21 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide The entry should be similar to the following: local_print_queue_name|[printer_model_and_manufacturer]:\ :lp=:mx#0:rm=OkiLAN 6010e_name:\:rp=remote_print_queue_name:\:sd=path_to_spool_directory:lf=just log_file_name local_print_queue_na...
Page 113 - Remote LPD Printing
TCP/IP IV - 23 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Remote LPD Printing The way print jobs are queued to a Remote LPD systemvaries among the vendors that support TCP/IP. UNIXsystems that are BSD-based typically use the lpr pro-gram to submit print jobs. Other UNIX systems mayuse the lp ...
Page 115 - MODE; Opens connection to remote host.; CLOSE; Terminates FTP session.; QUIT
TCP/IP IV - 25 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide MODE Specifies transfer mode. Streamis the only transfer mode sup-ported. OPEN Opens connection to remote host. CLOSE Terminates FTP session. QUIT Terminates FTP session and exitsFTP. BYE Equivalent to QUIT. OkiLAN 6010e print servers ...
Page 116 - Timeout Checking
IV - 26 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide $ ftp OkiLAN 6010e_name<Enter>Connected to OkiLAN 6010e_name.220 ESI-2810 Version 3.0 ready.Name (OkiLAN 6010e_name:anyone):<Enter>230 User logged in.ftp> binary<Enter>200 Type set to I.ftp> put chart.ps MPX1<Enter&...
Page 117 - Raw Port Printing
TCP/IP IV - 27 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Raw Port Printing Host computer software can use a raw TCP/IP portconnection to send data to the OkiLAN 6010e. A TCP/IP port has been assigned to the output port of theOkiLAN 6010e as follows: t r o P P I / P C T t r o P t u p t u O 0 ...
Page 118 - Easily assign an IP address; System Requirements
IV - 28 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Chapter 4: OkiNet for TCP/IP Overview This section contains information about OkiNet forTCP/IP. OkiNet for TCP/IP provides SNMP-basedsupport for the entire OkiLAN 6010e family of printservers. OkiNet for TCP/IP allows you to: • Easily assign ...
Page 119 - Microsoft; Running OkiNet for TCP/IP
TCP/IP IV - 29 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide OkiNet for TCP/IP requires that the TCP/IP protocol isrunning using a Winsock (Windows Sockets) TCP/IPstack, version 1.1 or greater. A Winsock TCP/IP proto-col stack is available from many vendors including thefollowing: • Microsoft • ...
Page 121 - Configuring TCP/IP Options
TCP/IP IV - 31 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Configuring TCP/IP Options To configure options specific to the TCP/IP protocol,select the TCP/IP tab. The following screen will dis-play:
Page 122 - IP Address Resolution; CAUTION: If you select an invalid subnet mask, you
IV - 32 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Fill in the following information: IP Address Resolution • Set Permanent – Select this option to make the IPaddress permanent. If the OkiLAN 6010e has beenconfigured to remember its IP address, it does notneed to determine its address each ti...
Page 130 - Enabling/Disabling Protocols; To configure SNMP traps, select the SNMP Traps tab.
IV - 40 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Enabling/Disabling Protocols To enable or disable protocols on the OkiLAN 6010e,select the Protocols tab. Select each protocol you wishto enable. If you disable a protocol, the OkiLAN 6010ewill no longer communicate using that protocol. SNMP ...
Page 136 - No value
IV - 46 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Selecting an Existing ViewTo select an existing view, choose Select from the Viewmenu. Highlight the view you wish to open and selectOK. The OkiLAN 6010e list will be displayed asdescribed by the view selected. Modifying View Settings Before ...
Page 137 - IP Address
TCP/IP IV - 47 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide H/W Address 12 hexadecimal digits forthe Ethernet address IP Address XXX.XXX.XXX.XXX;use “*” for groups / subnets Name SNMP System Name (sysname) for the print server Product # Select from the list ofproduct number(s) Product Type Sele...
Page 138 - Select Add to enter these addresses.
IV - 48 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide • Specify Devices/Networks – This method addsspecific print servers (or groups of print servers) tothe list. If you have OkiLAN 6010e print serversthat are not on the local network (i.e. across rout-ers), the address of each OkiLAN 6010e must...
Page 142 - Starting a Telnet Session
IV - 52 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Starting a Telnet Session A simple telnet interface has been provided to commu-nicate with devices supporting telnet. A telnet sessioncan be started by selecting the OkiLAN 6010e from theprint server list and choosing the Telnet Session optio...
Page 143 - Chapter 5: Telnet Configuration; To run the configuration utility, type the
TCP/IP IV - 53 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Chapter 5: Telnet Configuration Overview The OkiLAN 6010e Configuration utility (telnet)provides system, network and printer status informationand allows you to change the configuration of yourOkiLAN 6010e. Note: The configuration of y...
Page 144 - When you are finished typing your pass-
IV - 54 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide 3. When you are finished typing your pass- word, press Enter. For password verifica-tion, you will then be asked to enter yourpassword again. Each time you use the utility, you will beasked to enter your password. If you fail toenter the pass...
Page 146 - Remember, when choosing a permanent IP address:
IV - 56 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Remember, when choosing a permanent IP address: • The IP address must follow the formatXXX.XXX.XXX.XXX, where each XXX isa number between 0 and 255. • If you select an invalid IP address you maynot be able to access the OkiLAN 6010e. • You ca...
Page 149 - CAUTION: Do NOT use this option without having the
TCP/IP IV - 59 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide TCP Connection Configuration(Option 7) TCP Connection TimeoutThis is used to sever network TCP/IP Connections thatare idle for more than a specified period of time (be-tween 1 and 3600 seconds). You can also disabletimeout checking. Un...
Page 150 - CAUTION: Make sure that no print jobs are active
IV - 60 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Restore to Factory DefaultConfiguration (Option 9) This option automatically restores the OkiLAN 6010eto its original factory defaults. Be aware that when yourestore the OkiLAN 6010e to the original factorydefault settings, only the TCP/IP pr...
Page 151 - Appendix A: Troubleshooting; Main Status Indicator; While holding in the Print Configuration; Power cycle the OkiLAN 6010e. It will have
TCP/IP IV - 61 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Appendix A: Troubleshooting Main Status Indicator Upon power-up, the main status indicator flashesorange. It changes to green when the OkiLAN 6010epasses self-test. The indicator stays orange if theOkiLAN 6010e fails self-test. If the ...
Page 152 - Unable to Assign IP Address
IV - 62 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Unable to Assign IP Address GleaningIf you ping the device and are not getting a response,the glean is not working. Check the following possibleproblems: • Verify the ARP table contains the correcthardware and IP address by running the‘arp –a...
Page 156 - OkiNet for TCP/IP – Winsock Errors; Hardware Error Messages
IV - 66 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide OkiNet for TCP/IP – Winsock Errors • If you see an error before OkiNet for TCP/IPappears on the screen, try setting a hostname in the hosts file in the Windowsdirectory (check the documentation for yourWindows TCP/IP stack). • If you have dif...
Page 157 - Printing a Configuration Page
TCP/IP IV - 67 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide If you find the cable is connected and you are stillreceiving this message or any other “ST:” error mes-sage, power cycle the OkiLAN 6010e. If the errorcontinues, call Okidata Customer Support at1-800-OKIDATA (1-800-654-3282). System C...
Page 158 - Unable to Print
IV - 68 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide If you do not know the configuration of the OkiLAN6010e or you think the configuration has been changed,use the following method for printing a configurationpage: • With the network cable detached, attach theOkiLAN 6010e to a printer and powe...
Page 159 - FTP
TCP/IP IV - 69 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide • If the ping succeeds, try ftping a test file tothe print server. If the ping fails, you mighthave a configuration problem with theOkiLAN 6010e (the IP address or gatewayaddress might be incorrect, etc.). • If the ftp succeeds, there ...
Page 160 - Configuring SCO UNIX for Printing
IV - 70 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide Appendix B: Application Consider-ations Overview This appendix provides application notes for the follow-ing: • Assigning the OkiLAN 6010e IP Addresswith BOOTP • Assigning the OkiLAN 6010e IP Addresswith RARP • Using the Windows NT v3.5 LPR P...
Page 163 - An OkiLAN 6010e powers up but does not
TCP/IP IV - 73 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide The ht signifies hardware type. For the OkiLAN 6010e,it will always be ether for an Ethernet device and tokenfor a Token-Ring device. The ha signifies the networkhardware address. For BOOTP, the network hardwareaddress must be represen...
Page 164 - The bootpd daemon transmits a response to
IV - 74 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide 4. The bootpd daemon transmits a response to the OkiLAN 6010e with the IP address192.168.42.55. The OkiLAN 6010e will usethis IP address for all subsequent transmis-sions. For these steps to work properly, at least one BOOTPdaemon (bootpd) mu...
Page 165 - OR
TCP/IP IV - 75 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide OR • Your router(s) are configured to forwardBOOTP packets between the OkiLAN6010e’s subnet and the subnet of the hostrunning the BOOTP server. Configuring the OkiLAN 6010e IP Ad-dress with RARP RARP is an acronym for Reverse Address R...
Page 167 - OKIPRINTER
TCP/IP IV - 77 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide /etc/ethers: The “/etc/ethers” file is where each entrymaps a host name to a network hardwareaddress. An example entry is shownbelow. 00:02:16:17:50:A4 OKIPRINTER The following sequence of events occurs during thepower up of the OkiLAN...
Page 168 - The rarpd daemon transmits a response to
IV - 78 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide 5. The rarpd daemon transmits a response to the OkiLAN 6010e with the IP address192.168.42.55. The OkiLAN 6010e willthen use this IP address for all subsequenttransmissions. For all these steps to work properly, at least one RARPdaemon (rarpd...
Page 171 - services” file; printer 515/tcp spooler; Start inetd by typing the following at the; Invoke the SAM utility by typing sam at the
TCP/IP IV - 81 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide This is helpful if the daemon was terminatedfor some reason. For more information oninetd or “/etc/inetd.conf”, type man inetd orman inetd.conf. 4. Make sure the following entry is in the “/etc/ services” file printer 515/tcp spooler 5...
Page 172 - A form appears asking you to define a
IV - 82 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide A form appears asking you to define a remote printer. 4. Enter information into the following fields as described. a) Printer name – lj4 This is the name of the printer as refer-enced by the local HP machine. Printjobs sent to this printer ar...
Page 173 - Select Perform Task from the SAM menu.; Enable the printer you just created using; lp –d lj4 filename
TCP/IP IV - 83 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide f) Make this the system default printer? (y or n) – n g) Printer class – (optional) h) Restrict cancel – (optional) i) Remote printer on a BSD system? (y or n) – y Tells the HP-UX system that it is com-municating with a Berkeley style ...
Page 175 - Make sure the rlp process is not running by; kill –15 process_number
TCP/IP IV - 85 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide PrerequisitesBefore you proceed, the following prerequisites must bemet. Most of the time steps 2 through 5 are alreadyconfigured since the HP-UX system is on a TCP/IPnetwork. Do not perform steps 2 through 5 unless theinstallation pro...
Page 177 - Select the following options from the SAM
TCP/IP IV - 87 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide 2. Invoke the SAM utility by typing sam at the UNIX prompt. (We suggest you do this atthe system console. SAM uses a screenoriented interface that works best at theconsole.) 3. Select the following options from the SAM menu: Printers a...
Page 178 - d) Remote cancel model – rcmodel; Select the OK button. A status window will; Pull down the Lists menu and select Exit.
IV - 88 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide This is the name of the queue on theOkiLAN 6010e and must end with 1, 2,3 or 4, depending on the port selected toservice the print jobs. d) Remote cancel model – rcmodel Used for remote printer job removal. e) Remote status model – rsmodel Us...
Page 179 - Test printing to the OkiLAN 6010e with the
TCP/IP IV - 89 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide 7. Select the Exit SAM button. 8. Test printing to the OkiLAN 6010e with the following command: lp –d lj4 filename Configuring HP-UX v10.xx for Printingwith the OkiLAN 6010e This application note describes the configuration of theprint...
Page 180 - Make sure the rlp process is not running by
IV - 90 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide If FF, LF or NF are the last two letters of thequeue name, the job will be convertedaccordingly. See the section on RemoteQueue Names. PrerequisitesBefore you proceed, the following prerequisites must bemet. Most of the time steps 2 through 5...
Page 183 - c) Remote printer name – yourqueuename
TCP/IP IV - 93 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide c) Remote printer name – yourqueuename This is the name of the queue on theOkiLAN 6010e and must end with 1, 2,3 or 4, depending on the port selected toservice the print jobs. d) Remote cancel model – rcmodel Used for remote printer jo...
Page 185 - The IP address of the OkiLAN 6010e has; Procedure; Install Remote Line Printing or verify that it
TCP/IP IV - 95 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide • yourqueuename – This is the name of thequeue on the OkiLAN 6010e and must endwith 1, 2, 3 or 4 depending on the portselected to service the print jobs. If FF, LF or NF are the last two letters of thequeue name, the job will be conver...
Page 186 - If remote line printing is already installed,
IV - 96 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide 3. If remote line printing is already installed, mkdev rlp will respond with the messageRemote line printing working directoryalready exists. Do you wish to continueinstalling the remote line printing system?Answer no to this prompt and skip ...
Page 187 - Try printing to the OkiLAN 6010e by
TCP/IP IV - 97 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide 7. At the UNIX prompt, type: mkdir /usr/ spool/lpd/lj4 8. Type: touch/usr/spool/lpd/lj4/lj4.log 9. Try printing to the OkiLAN 6010e by issuing the following command: lp –d lj4 filename IBM’s AIX ver. 3.x for Printing with theOkiLAN 601...
Page 188 - To add a remote queue, select the following; options from the SMIT menu:
IV - 98 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide • yourqueuename – This is the name of thequeue on the OkiLAN 6010e and must endwith 1 or 2, depending on the port selectedto service the print jobs. If FF, LF or NF are the last two letters of thequeue name, the job will be convertedaccording...
Page 189 - Enter information into the following fields; c) Name of QUEUE on remote printer –; yourqueuename
TCP/IP IV - 99 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide A form appears asking you to define aremote print queue. 4. Enter information into the following fields as described. All other fields should use thedefault value. a) NAME of queue to add – lj4 This is the name of the local print queue...
Page 190 - AIX> startsrc –s qdaemon; Try printing to the printer attached to the; AIX> lpr –Plj4 filename
IV - 100 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide 5. Start the lpd subsystem with SMIT: Spooler (Print Jobs and Printers)Manage Remote Printer SubsystemServer Serviceslpd Remote Printer SubsystemStart Using the lpd SubsystemStart BOTH Now and at System Restart 6. Start the qdaemon by typing...
Page 191 - The name OKIPRINTER and the IP address
TCP/IP IV - 101 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide • OKIPRINTER – The host name of theremote system which is the OkiLAN 6010e.For example, to telnet to the OkiLAN 6010eand invoke the OkiLAN 6010e Configura-tion utility, you would type telnetOKIPRINTER. A host name is not requiredfor t...
Page 192 - OKIPRINTER!yourqueuename – I any; Try printing by issuing the following com-; mand: lp –d lj4 filename
IV - 102 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide ProcedureTo configure the Solaris machine so users can spoolprint jobs to the pcl print queue on the OkiLAN 6010enamed OKIPRINTER, do the following: 1. Login to the Solaris machine as root. 2. Type: lpsystem –t bsd OKIPRINTER 3. Type: lpadmi...
Page 194 - Make sure the LPD daemon is running on
IV - 104 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide 2. Make sure the LPD daemon is running on the Sun-OS or Ultrix system by issuing thefollowing command at the UNIX prompt: ps aux | grep lpd If the LPD daemon is running, you shouldsee output similar to: root 135 0.0 0.0 52 0 ? IW May 24 0:01...
Page 195 - Login to the Sun-OS or Ultrix machine as; lpr –Plj4 filename
TCP/IP IV - 105 Section IV - TCP/IP OKI OkiLAN 6010e User’s Guide ProcedureTo configure the Sun-OS or Ultrix machine so thatusers can spool print jobs to the pcl print queue on theOkiLAN 6010e named OKIPRINTER, do the follow-ing: 1. Login to the Sun-OS or Ultrix machine as root. 2. Using a text edit...
Page 201 - OkiLAN 6010e Connect for IP
Windo ws Printing V - 5 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide Chapter 1: OkiLAN 6010e Set Upfor Windows NT 4.0 Overview This section contains instruction and information onhow to set up your OkiLAN 6010e for a Windows NT4.0 environment. Print options for Windows NT 4.0include: •...
Page 202 - Install the OkiLAN 6010e Connect for TCP/
V - 6 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide InstallationTo install OkiLAN 6010e Connect for TCP/IP, followthe instructions below: 1. Install the OkiLAN 6010e Connect for TCP/ IP files – see Section I. 2. When installation is complete, click on Start, Settings and then Printers. ...
Page 203 - From the list of Available Printer Ports,
Windo ws Printing V - 7 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide 5. From the list of Available Printer Ports, select OKI OkiLAN 6010e Connect IPMonitor as the type of port to add and clickNew Port.
Page 205 - If the port you wish to add is listed in the
Windo ws Printing V - 9 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide 6. If the port you wish to add is listed in the Ports available on local subnet: window,select the port name and click Add. If the port you wish to use is not listed, clickthe Locate non-local device button andenter t...
Page 206 - OkiLAN 6010e Connect for DLC
V - 10 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide OkiLAN 6010e Connect for DLC OkiLAN 6010e Connect for Data-Link Control (DLC)provides a direct printing solution for users in MicrosoftWindows NT serverless environments with the DLC/LLC protocol. Print jobs printed through OkiLAN6010...
Page 207 - Administrator privileges
Windo ws Printing V - 11 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide DescriptionAn optional field where you may list the location orother useful information about the printer port. Using the Windows NT 4.0 LPR PrintMonitor A Microsoft LPR print monitor is shipped with Win-dows NT 4.0....
Page 208 - Install LPR Print Monitor; Using OkiNet for IP, assign the print server; Add LPR Printer; On the Printer Ports screen, select LPR
V - 12 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide Install LPR Print Monitor 1. Open the Windows NT Control Panel. 2. Select the Services tab. 3. Select Add, then Microsoft TCP/IP print- ing. 4. Click the Close button. 5. Restart the system. Assign Print Server IP Address 1. Using Oki...
Page 209 - In the Name or address of server providing
Windo ws Printing V - 13 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide 5. In the Name or address of server providing lpd: field, enter the IP address you assignedto the printer. 6. In the Name of printer or print queue on that server: field, enter the print server outputport being used....
Page 210 - Verify the port just added is selected and; Select a printer driver and click Next.; To share the printers with others on the
V - 14 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide 7. Click OK. 8. Verify the port just added is selected and then click Next. 9. Select a printer driver and click Next. 10. Enter a name for the printer and click Next. 11. To share the printers with others on the network, select Share...
Page 212 - Printer menu select Create Printer.; OKI OkiLAN 6010e Connect for IP.
V - 16 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide InstallationTo install OkiLAN 6010e Connect for TCP/IP, followthe instructions below: 1. Install the OkiLAN 6010e Connect for TCP/ IP files—see Section I. 2. From the Windows NT Print Manager Printer menu select Create Printer. 3. In ...
Page 214 - Select Add Software from the Network; Select Connectivity Utilities and TCP/IP; Select Continue from the Windows NT TCP/
V - 18 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide Install TCP/IP and LPR Print MonitorTo install the LPR print monitor on your system, followthe steps below: 1. Open the Windows NT Control Panel. 2. Double-click the Network icon. 3. Select Add Software from the Network Settings windo...
Page 215 - Assign Print Server IP Address
Windo ws Printing V - 19 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide Assign Print Server IP Address 1. Using OkiNet for IP, assign the print server an IP address; for example, 10.10.10.2. Note: For more information on usingOkiLAN 6010e TCP/IP, see OkiNet forTCP/IP. Add LPR Printer 1. ...
Page 216 - OkiLAN 6010e Connect for TCP/IP
V - 20 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide Chapter 3: OkiLAN 6010e Set Upfor Windows 95 Overview This section contains instruction and information onhow to set up your OkiLAN 6010e for a Windows 95environment. Print options for Windows 95 include: • OkiLAN 6010e Connect for TC...
Page 220 - When the installation is complete, click on
V - 24 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide OkiLAN 6010e Connect for DLC OkiLAN 6010e Connect for Data-Link Control (DLC)provides a direct printing solution for users in MicrosoftWindows 95 serverless environments with the DLC/LLC protocol. Print jobs printed through OkiLAN6010...
Page 221 - In the Add Port window, select the radio; name and click the Add button.
Windo ws Printing V - 25 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide 5. In the Add Port window, select the radio button labeled Other and select OKIOkiLAN 6010e Connect DLC Monitor asthe type of port to add. Click OK. You will enter into the Add OkiLAN 6010eConnect Port screen where t...
Page 222 - Output Port Configuration Options
V - 26 Section V - Windows Printing OKI OkiLAN 6010e User’s Guide You will now be able to use OkiLAN 6010e Connectfor DLC. Whenever you print to the printer configuredwith OkiLAN 6010e Connect, your print job will godirectly to the OkiLAN 6010e print server port. Port SettingsIf you have printing pr...
Page 223 - Index
Index-1 Index OKI OkiLAN 6010e User’s Guide Index A Advanced Management Features OkiNet Alert II-26OkiNet for NDS II-27OkiNet for TCP/IP II-27printer security for TCP/IP II-28Security II-7 Assigning an IP Address BOOTP IV-15, IV-71DHCP IV-12gleaning IV-11RARP IV-15, IV-75static route entry IV-14 B B...