Oki 16n - Manual

7 Read Me First English Optional Accessories • Second paper tray holding 500 sheets • Multi purpose feeder for up to 50 envelopes or 100 sheetsof labels, paper etc. • Two memory expansion slots (SIMMs) • Memory upgrade to 64Mb • High speed multi-purpose I/F slots • PostScript Level-2 option board an...

9 Read Me First English Identifying Your Printer Before you start setting up your printer make sure that it is placedon a firm, flat surface and out of direct sunlight. Printer Setup The following section will lead you through installing yourprinter, changing the default language, viewing and changi...

10 Installing Your Printer Before connecting the printer to your PC and mains outlet, youmust first install the toner cartridge and insert paper in the papertray. Note: Your printer is shipped with the image drum cartridge already installed. 1. Remove any adhesive tape from the outer covers. 2. Pres...

11 Read Me First English 5. Peel off the adhesive tape, and remove the foam packingtube from the toner hopper on the image drum cartridge. 6. Reinstall the image drum cartridge back into the printer,locating the pins on each end into the slots at either sideof the printer. Installing Toner Cartridge...

12 Installing Paper 1. Pull down on the packing card under the front of the tray,and remove it from the machine. 4. Replace the tray in the printer. The paper level indicator(3) provides a visual indication of how much paper isleft in the tray. 2 1 2. Remove the paper tray from the bottom of the pri...

13 Read Me First English Connecting Your Printer 1. Attach the PC interface cable to the parallel interfaceport (1) on your printer, and to the parallel (25-pin D-type female) port on your PC. 2. Connect the power cable to the printer and plug in to themains outlet (2). Paper Exit Paths At the rear ...

15 Read Me First English Front Feed Tray The front (manual) feed tray may also be used to feed up toabout 100 sheets automatically. In conjuction with the rear paperexit, this method gives an almost straight paper path, and istherefore suitable for heavy grade paper. 5. Ensure that MANUAL FEED is se...

16 Changing the Default Language When the printer is shipped the default language is English. Tochange this language proceed as follows: 1. Take the printer off-line, press the ON-LINE button. 2. Press the MENU 1 button for more than two seconds. The message PRINT MODE will be displayed. 3. Press th...

17 Read Me First English Installing a Windows Printer Driver Your printer is supplied with printer drivers for Windows 3.1,Windows 95. To install drivers follow the appropriate sectionbelow. Installation for Windows 3.1x Installation for Windows 3.1 (or Windows for Workgroups) isperformed via the Wi...

18 Using an Alternative Printer Driver If no suitable driver is available, you can use one of the followingemulations that may be supplied with your software. • Any PCL5e driver. • Any driver for the following printers: • HP LJ IV• HP LJ IV P• HP LJ IV Plus Note: Using a non-Oki driver may restrict ...

19 Read Me First English Index A Accessories .............................. 7 C Cable data interface ..................... 13power ....................... 4, 5, 13 Cleaning the printer ................. 4Components indentification ..................... 9 D Demo page ............................. 16 ...

20 Oki Systems Company Oki Systems (UK) Limited550 Dundee RoadSlough Trading EstateSloughBerks SL1 4LE Tel: 44 (0) 1753 819819Fax: 44 (0) 1753 819899 16n_gbR.pm6 16/09/96, 17:31 20