NUTRIBULLET NBY07200 - User Manual

Control panel. This appliance can steam and blend vegetables and fruits (peeled and cored, with seeds removed) as well as meats and fish (with bones removed). For cooking times, see Steaming and Blending Tips on page 27. Steam Auto Blend Pulse Steam Auto Blend Pulse POWER BUTTON: • Activates the sel...

Before first use. Before using your nutribullet Baby ® Steam + Blend for the first time, please take a moment to perform the steps below. 1. UNPACK Open box. Remove the Motor Base and all attachments. Place all parts on a flat, dry surface. 2. CLEAN Wash the Blending Blade, Work Bowl, and Work Bowl ...

Initial cleaning cycle. 3 Replace the Water Reservoir Cap and turn clockwise to close and lock. 4 Perform a Steam or Blending Cycle by following the steps explained in the Using the Steam + Blend section, page 18. 1 Turn the Water Reservoir Cap counter-clockwise to unlock and remove. 2 Fill the Wate...

3 Gently lower the Blending Blade vertically onto the Blade Holder in the center of the Work Bowl , securing it in place. Using the Steam + Blend. 1 Gather your desired ingredients and wash them. Prepare the ingredients to be steamed by cutting, skinning, and removing any rinds, stems, or stone seed...

Using the steam setting. 1 Turn the Setting Dial to select the Steam setting and press the Power button. The Indicator light will flash blue throughout the steaming process to indicate normal operation. WARNING! The nutribullet Baby ® Steam + Blend will generate very hot steam when cooking food. Han...

DEFROST SETTING: Microwave heating often results in uneven food temperatures where one area of the food is still cold and another area is very hot. These hot spots are very dangerous, because they could easily burn a baby’s mouth. We recommend defrosting your frozen nutribullet Baby ® servings with ...

6 Untwist the Water Reservoir Cap and remove any remaining water from the Water Reservoir. 8 Clean the inside of the Blade Stem to remove any remaining food or water and dry fully. 7 Clean the Blending Blade, Work Bowl, and Work Bowl Lid. (See Care & Maintenance section, page 31.) TIP: Use a cle...

What options do I have for Blending? You have three blending options:• Continuous Blend (push the Power button to start blending, push Power again to stop). • Steam-and-Blend (run a Steam cycle first, then automatically start a Blend cycle). • Pulse Blend (Hold the power button for 3 seconds to acti...

DESCALING: • We recommend descaling every 4 weeks, but it may be needed sooner if you notice limescale buildup earlier. • If descaling after a steam cycle, let the appliance cool down completely before beginning the descaling process. • DESCALING PROCESS: Discard any remaining water from the Water R...

If your product becomes defective due to faulty material or workmanship within a period of One (1) Year from the date of purchase, we warrant to do the following: • For New Zealand Consumers: We will replace the defective product with a new product, free of charge, or repair the product at our cost,...