NordicTrack NTSA03991 - Manual
NordicTrack NTSA03991 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Important Precautions
- Page 4 – Part Identification Chart
- Page 5 – Assembly
- Page 6 – Frame Assembly
- Page 8 – Cable Assembly
- Page 9 – Assembly Option A
- Page 11 – Assembly Option B
- Page 12 – Seat and Plate Assembly
- Page 15 – Exploded Drawing—Model No. NTSA03991
- Page 16 – Ordering Replacement Parts; Limited Warranty
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Model No. NTSA03991
Serial No.
The serial number is found in the
location shown below. Write the
serial number in the space above.
QUESTIONS?
As a manufacturer, we are
committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-888-825-2588
Mon.–Fri., 6 a.m.–6 p.m. MST
Serial Number Decal
Visit our website at
www.nordictrack.com
new products, prizes,
fitness tips, and much more!
USER’S MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for NordicTrack NTSA03991
Summary
3 WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems.Read all instructions before using. ICON assumes no responsibility for personal injury or propertydamage sustaine...
4 Part Identification Chart Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small partsmay have been pre-attached. If a part is not in the parts...
5 Assembly Make sure you have the following tools: • Two adjustable wrenches • One rubber mallet • You will also need grease or petroleum jelly, a small amount of soapy water, and clear tape ormasking tape. Note: Assembly will be more convenient if you havea socket set, a set of open-end or closed-e...
