Page 2 - ii
Page 4 - iv; Never; aim the unit at highly reflective objects like mirrors
iv • Never aim the unit at highly reflective objects like mirrors and retroreflective surfaces, which are in close proximity to the laser rangefinder. This can lead to the permanent damage of the photoreceiver incorporated into the device.
Page 5 - TABLE OF CONTENTS
1 TABLE OF CONTENTS 1. BRIEF DESCRIPTION.......................................2 Principle of operation..................................................2 Key Features ...............................................................3 2. DEVICE APPEARANCE ...................................4 3. DELIVE...
Page 6 - BRIEF DESCRIPTION; The; LRB 3000PRO Laser Rangefinder Binoculars
2 CAREFULLY READ ALL THE INSTRUCTIONS BEFORE USING! FAILURE TO OBEY THE INSTRUCTIONS WILL VOID THE WARRANTY ! 1. BRIEF DESCRIPTION The LRB 3000PRO Laser Rangefinder Binoculars (System) is an advanced laser range finder that enables instant distance, speed, and angular measurements. The unit complies...
Page 7 - Key Features; Speed detector
3 Key Features Modern digital circuitry allows targeting through most types of glass Speed detector Selection of the first, last or the most reflective target Distance is displayed in meters or yards Original digital circuitry allows ranging through most types of glass, bushes and other ob...
Page 8 - DEVICE APPEARANCE
4 2. DEVICE APPEARANCE Fig. 1. Front view 1 – Eyepieces 2 – Objective lens 3 – Mode button 4 – Action button 5 – Battery compartment cover 6 – Rubber grip 5 4 1 3 2 6
Page 13 - OPERATION INSTRUCTIONS; Preparing device for operation.; Connect and insert battery into the battery compartment.; LOW BATTERY’; warning is displayed voltage
9 Environmental Operational temperature range Storage temperature range -25 / +50 o C (-13 / +122 o F) -45 / +65 o C (-49 / +149 o F) Mechanics Tripod thread Weight without battery Dimensions ¼” x 20 TPI 970 g 158x145x70 mm 5. OPERATION INSTRUCTIONS Preparing device for operation. - Rotate the batte...
Page 14 - Metal housing of the battery may degrade the compass; Measurement procedure; Operation and service modes
10 • A 9V Lithium non-magnetic battery guarantees over 5,000 shots at room temperature. It is recommended for the field usage. In addition, this battery does not influence the internal compass. Note: Metal housing of the battery may degrade the compass accuracy. Measurement procedure The LRB 3000PRO...
Page 15 - Factors affecting measuring distance; solid angle from the sun.; Target selection logic
11 Factors affecting measuring distance Though maximum measurement distance depends on target reflectivity, weather conditions and other conditions, for most targets the unit will provide accurate ranging for up to 2,500 meters. Under good conditions a large size target can be measured up to 3,000 m...
Page 16 - Individual Measurement and Scanning regimes
12 smaller, the farther, and the less reflective is the target – the higher is the possibility of obtaining an incorrect measurement. To improve accuracy the unit has a built-in target selection logic that allows choosing which target to range: the nearest (‘first’), the farthest (‘last’), or the mo...
Page 17 - Ready
13 parameters are measured in the Scanning regime though both will be quickly displayed, the second one may be difficult to register by eye. Nevertheless all data is recorded and may be recalled (see Data Recall mode for details.) Operation and service modes Pressing Mode button (3, Fig.1) in Ready ...
Page 20 - Compass calibration; Select; CALc; from; CAL; menu
16 2 – Target should not have high-reflective surface (white color is not considered high reflective in this case. 3 – Unit shall be well leveled with deviation from 0 not more than ±0.75 degrees. Horizontal direction shall be to Magnetic North (not True North). If devices detects large installation...
Page 21 - Data Recall mode; Data Recall; First measurement set number (display name:; rEc; Ready to Measure; cLr; at the end of recalled data will erase the
17 Data Recall mode In Data Recall mode results of the last 10 measurements can be displayed. Measurement results are saved in on-board memory in sets depending on the parameters set for measuring, for instance, if only distance is measured - the set will consist of one number, if distance and azimu...
Page 22 - BEST MEASURING TECHNIQUE; Target Selection Logic
18 6. BEST MEASURING TECHNIQUE Laser range finder measures distance by catching laser beam reflected from the target. Everything that improves reflection increases the measurement reliability and maximum range. 1. Use tripod when ranging remote targets. The longer is the distance, the greater is the...
Page 23 - STORAGE AND MAINTENANCE; Keep it away from direct sunlight.
19 7. STORAGE AND MAINTENANCE The unit is a sophisticated precision optical instrument equipped with laser and electronics. Therefore, it should be handled with due care. • Keep it away from direct sunlight. • Avoid impacts, jolts, dust, moisture, and sharp changes of temperature. • Do not use the d...
Page 24 - Check the charge of the battery. Replace it if it is weak.
20 8. TROUBLESHOOTING Ranging does not work. The display is transparent. Check the charge of the battery. Replace it if it is weak. Ranging does not work. The display indicates results of the last measurement. Wait until display becomes transparent, and press the Action button again. Compass reading...
Page 25 - NEWCON; warrants this product against defects in material
21 9. WARRANTY NEWCON warrants this product against defects in material and workmanship for one year from the date of the original purchase. Longer warranty is available, subject to the terms of the specific sales contract. Should your Newcon product prove to be defective during this period, please ...
Page 26 - CUSTOMER SUPPORT
22 10. CUSTOMER SUPPORT Should you experience any difficulties with your NEWCON OPTIK product, consult the enclosed manual. If the problem remains unresolved, contact our customer support department at (416) 663-6963 or toll free at 1-877-368-6666. Our operating hours are 9am-5pm, Monday - Friday, E...
Page 27 - CERTIFICATE; Quality Inspector
23 11. QUALITY CERTIFICATE Serial number _____________________________ The unit has passed the quality inspection. Production date Quality Inspector Purchase date
