Newcon Optik LRB 20000 - Manual

16. DATA OUTPUT TO EXTERNAL EQUIPMENT The measured data can be exported to a remote computer through the connector X2. To export the output data, you must to apply the voltage of 3 to 8 V from the connected computer to the pin 9 of the connector X2. The amplitude of the output signals will depend on...

To secure trouble-free operation of the rangefinder: - be prompt in replacing the rechargeable battery by freshly charged when the red LED in the left-hand eyepiece of the range finder starts to illuminate; - keep the range finder dry at all times especially in the cold season of the year; - after e...

15. RECHARGEABLE BATTERY HANDLING 15.1. The rechargeable battery is supplied in discharged condition. 15.2. While handling the battery, be certain to: - avoid contact with any bare circuit components while charging the battery; - strictly comply with the prescribed charging/discharging procedures. N...

3. TECHNICAL CHARACTERISTICS Parameter Rated and tolerable value Optics Binocular magnification Binocular angle of vision Eye relief, mm Rangefinder Range measurement limits, m Measurement error, m, max Time of preparation for range measurement after depressing of MEASURE button, s Range information...

11.3.5. The individual SPTA set is packed in the case 4 (Fig. 7). The case contains the spare rechargeable battery, pencil, eraser, cloth and coordinate converter. 12. LONG TERM STORAGE To preserve the rangefinder, proceed as follows: - cap the rangefinder connectors by paper and tie a cord round; -...

4. SUPPLIED ACCESSORIES Description Designation Qty Serial No. Remarks Rangefinder Tripod (optional) Angular mount (optional) Rechargeable battery Fuse link VP1-1 1,0 A 250 V Sealing ring Framed lens Membrane Eye shield Diaphragm Pencil TM, M, CT, T Wrench Synthesized fiber brush KXOOK No. 7 Coordin...

5. PRINCIPLES OF WORK 5.1. The LRB 20000 assembly (Fig.1) consists of rangefinder 1 mounted on the angular mount 2 . The latter is mounted on the tripod 3 . 5.2. Rangefinder (Fig.2) is designed for terrain observation and measuring the distance to the closest or next-in range target caught in the be...

- remove the moist silica gel from the case and fill the case with the fresh one. Moist silica gel may be subjected to multiple dehydrations at (120±3) °C without any deterioration of its properties. Using a microwave oven is allowed. To dehydrate the silica gel, proceed as follows: - place the sili...

6.2. According IEC 825 standard the rangefinder belongs to the third class device of laser radiation hazard. NEVER: - Turn on the rangefinder aiming on people or animals; - Measure distance through window and door glasses; - Measure distance to mirror-reflecting surfaces (mirrors, car and building w...

7. PREPARING FOR USE 7.1. Choose an observation post. 7.2. Rotate the objective frame to bring the reticle to sharp focus. 7.3. Check the battery voltage and the rangefinder before operation. 7.3.1. To analyze the battery voltage, set the ON-OFF selector switch to the ON position and check if the Lo...

- Rotate the azimuth dial to align the base reference value with the zero wheel. Now the rangefinder is aligned with the base line within 30.00 mils; - Turn the clamping handle to lock the azimuth dial in the determined position. 7.5.2. To orient the rangefinder by using the reference directional an...

- Vertical angles up to 0.80 mils and elevation angles falling within ± 0.40 mils may be read off the reticle with a maximum accuracy of 0.05 mils. 8.7. To determine the polar coordinates, proceed as follows: - Use the compass to orient the Angular Mount as directed under 7.5.3; - Aim the rangefinde...

If there is more than one target on the laser beam path (a wire in front of a building), the decimal point is displayed in the least significant digit position of the range indicator. In this event, the rangefinder may be used to range the first or the last target by pressing the MEASURE 1 or MEASUR...

Individual SPTA set 1 - Rechargeable battery 10D-0,55 С -1; 2 - Fuse link VP1-1 1,0 А 250 V; 3 - Pencil; 4 - Sealing ring; 5 - Eye shield; 6 - Framed lens; 7 - Cloth; 8 - Eraser; 9 - Wrench; 10 - Coordinate converter; 11 - Charging device; 12 – Protection device; 13 - Indicating silica gel; 14…18 - ...

Angular Mount 1 - Adjustment knob; 2 - Lever; 3 - Bracket; 4 - Retainer; 5 - Scale; 6 - Framed lens; 7- Adjustment knob; 8 - Compass; 9 - Nut M8; 10 - Framed lens; 11 - Knob; 12 - Support; 13 - Level UK-10; 14 – Azimuth circle; 15 – Body Fig. 4 Rangefinder rear view 1 - Housing; 2 -MEASURE 1 and MEA...