Newcon Optik an 8x30m22 - Manual

Page 2 - Table of Contents

Table of Contents 1. BRIEF DESCRIPTION ............................................ 1 2. SPECIFICATIONS .................................................. 2 2.1 Shared specifications .............................................. 2 2.2 AN 8x30M22 detailed specifications ..................

Page 4 - BRIEF DESCRIPTION; The AN daytime binoculars AN 8x30M22,

1 1. BRIEF DESCRIPTION The AN daytime binoculars AN 8x30M22, The binoculars are designed and manufactured to military specifications and provide excellent brightness, image clarity and true image color . The built-in range finding reticle, M22 standard, enables measurements of horizontal and vertica...

Page 5 - Shared specifications; Interpupillary adjustment distance

2 2. SPECIFICATIONS 2.1 Shared specifications Prisms BAK4 Coating FMC Brightness index 50.4 Interpupillary adjustment distance 56-74 mm M22 Reticle Yes Operating temperature range –40°C … +70°C All binoculars are waterproof and shockproof (will withstand a drop test from 1.8m).

Page 6 - AN 8x30M22 detailed specifications

3 2.2 AN 8x30M22 detailed specifications AN 8x30M22 Magnification 8x Objective lens diameter 30 mm Focus 3 m – inf. Field of view 8° Apparent field of view 60° FOV @1000 m 132 m FOV @1000 yd 396 ft Exit pupil 3.8 mm Eye relief 17 mm Weight 0.545kg Dimensions, LxHxW, mm 110x156x55

Page 7 - DESIGN AND APPEARANCE; Optical design; Optical design of the binoculars is presented on Fig. 1.

4 3. DESIGN AND APPEARANCE 3.1 Optical design Optical design of the binoculars is presented on Fig. 1. 1 – objective lens 2 – erective prisms 3 – reticle lens 4 – eyepiece The light from the object or target you are looking at enters the binoculars through the objective lens system (1, Fig. 1

Page 8 - Reticle

5 Fig. 1). Due to the objective lens, the image at this point is turned upside down. However, as the image passes through the prism system, (known as the erective prisms) (2, Fig. 1) it becomes right side up (erect) and changed from right to left, to left to right. After the prisms the image rays pa...

Page 10 - Notes

7 5. DELIVERY SET Q-ty Notes Binoculars 1 Carrying strap 1 Lens cleaning cloth 1 Soft case with carrying strap 1 Eyepiece cover 1 Tripod adapter 1 Manual 1

Page 12 - Measuring horizontal angle using the reticle

9 6.3 Measuring horizontal angle using the reticle An M22 reticle built into these binoculars enables measuring height, distance and size of a target, as well as angle between two close targets. Though reticle appearance may differ from one model to another as described in 3.2, the description below...

Page 13 - Measuring vertical angle using the reticle

10 When the angle between two targets is larger than the angle measuring range (100 mils), it can be measured in several steps. The horizontal angle of cruiser shown in Fig. 5, is 130 mils (60+70=130). 6.4 Measuring vertical angle using the reticle Vertical angle measurement is similar to horizontal...

Page 15 - Using the reticle to calculate distance; To determine the distance to the target use the formula:; Measuring distance directly using the reticle

12 6.5 Using the reticle to calculate distance To determine the distance to the target use the formula: D = H/K, where D – distance to target in km, H – estimated height of the target in m, K – vertical angle of the target in mil. First, estimate the height (or width) of the target, then measure tar...

Page 17 - Calculating target's size using angle readings; where K is vertical angle in mils,

14 6.7 Calculating target's size using angle readings To calculate height and width user will need to estimate the distance to the target and measure its horizontal and vertical angles. Then using the formula for distance measurement one can calculate target’s height: H=DxK, where K is vertical angl...

Page 18 - STORAGE AND MAINTENANCE; Store the binoculars in a dry well ventilated place.

15 7. STORAGE AND MAINTENANCE The binoculars are precision optical instruments that should be carefully handled and properly maintained to keep them in a good working order. Clean the lenses after each use with special optical cloth. Never wipe the lenses with fingers; grease may damage the optics c...

Page 19 - NEWCON; warrants this product against defects in

16 8. WARRANTY NEWCON warrants this product against defects in material and workmanship for one year from the date of the original purchase. Longer warranty is available, subject to the terms of the specific sales contract. Should your Newcon product prove to be defective during this period, please ...

Page 22 - CERTIFICATE; Date of production:

19 10. QUALITY CERTIFICATE The binoculars serial number_______________________ complies with all technical specifications and has passed the inspection. Date of production: _________________________________ Quality Inspector: __________________________________ Quality Assurance Seal

Newcon Optik an 8x30m22 - Manual

Table of Contents:

Summary

Other Newcon Optik Models