Netgear PTV3000-100NAS - Manual
Netgear PTV3000-100NAS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Installation Guide
Installation
To install and set up the Push2TV adapter with Intel WiDi:
1.
Connect the Push2TV adapter to your TV and plug in the power adapter.
The Push2TV adapter LED is blinking when the adapter powers up. The LED
turns solid to indicate that the adapter is ready, but is not yet connected to your
computer.
2.
Turn on your TV and select the correct TV input source for your TV.
•
If you are not sure which input source to use, check the documentation that
came with your TV set.
•
The Ready for Connection screen displays on your TV within 30 seconds.
If you do not see this screen, make sure that the TV input is set to the HDMI
port where the Push2TV adapter is connected and all cable connections are
firmly secured.
3.
On your laptop, launch the Intel Wireless Display software. There are two ways
to launch the software
•
If your laptop has a
button or key, press it.
•
From Windows, select
Start
. In the search field, type
Intel Wireless Display
.
Select and run the Intel Wireless Display software.
4.
Use the Intel Wireless Display software to scan and find the Push2TV adapter.
The screen on the right shows that the
Intel Wireless Display software has found
the wireless adapter.
5.
Double-click the detected Push2TV
adapter to connect to it.
6.
If you are connecting the laptop to the
Push2TV adapter for the first time, the
Push2TV adapter displays a 4-digit
security code on the TV. Enter this 4-digit
security code into the Intel Wireless
Display software.
7.
Within a few seconds, the TV screen displays your laptop screen. The LED on
the Push2TV adapter turns solid.
You are now ready to use Push2TV for Intel Wireless Display.
Adjusting Your TV Display
You can adjust the image display on the TV screen:
•
To change how the image fits on the TV screen, on the Intel Wireless Display,
click the
Properties
button. Then click the
Resize TV picture
button and adjust
the picture using the plus or minus symbols.
•
To remove black bars displayed on the sides of your TV screen, open the
graphics properties and change the resolution to 1280x720. Changing the
resolution might result in black bars on the laptop. To remove the black bars,
open the graphics properties and clear the
preserve aspect ratio
check box.
Push2TV Adapter for Wireless Display (PTV3000)
Package Contents
Push2TV Front and Back Views
USB power cable
Push2TV
adapter
Power
adapter
HDMI
LED
USB Power
Reset
Wireless
Display
Mode /
WPS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
