Netgear FS608 v3 - Manual

Netgear FS608 v3

Netgear FS608 v3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
Page: / 4

Table of Contents:

  • Page 2 – Estimated Time: 5–10 minutes; Statement of Conditions; EN 55 022 Declaration of Conformance
  • Page 3 – Prepare to Install the Switch; Make sure the selected location is:
  • Page 4 – The Power light should light up.; Troubleshooting; The Power light is not lit; The switch has no power.; Technical Specifications
Loading the manual

Installation Guide

Fast Ethernet Switch

1 0 / 1 0 0 M b p s

F S 6 0 5 v 3 / F S 6 0 8 v 3

Technical Support

PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH
YOUR PRODUCT.

By registering your product at www.NETGEAR.com/register, we can provide you with faster
expert technical support and timely notices of product and software upgrades.

NETGEAR, INC.

Support Information

Phone: 1-888-NETGEAR (For US & Canada only) - 24 x7 phone support

See Support Information card for other countries.

E-mail: [email protected] (24 x 7 online support)

www.NETGEAR.com

© 2006 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy, Auto Uplink and
Everybody's Connecting are trademarks or registered trademarks of Netgear, Inc. in the
United States and/or other countries. Microsoft and Windows are registered trademarks of
Microsoft Corporation in the United States and/or other countries. Other brand and product
names are trademarks or registered trademarks of their respective holders. Information is
subject to change without notice. All rights reserved

February 2006

2 0 1 - 1 0 7 4 9 - 0 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Estimated Time: 5–10 minutes; Statement of Conditions; EN 55 022 Declaration of Conformance

Introduction The NETGEAR® 5/8-Port Fast Ethernet Switch Model FS605 v3/FS608 v3 provides you witha low-cost, reliable, high-performance switch to connect up to five or eight different Ethernet-enabled devices (such as computers, file servers, print servers, printers, routers and hubs). You use the F...

Page 3 - Prepare to Install the Switch; Make sure the selected location is:

Unpack the Box and Verify theContents When you open the box, verify that you received everything. The package includes: • 5/8-Port Fast Ethernet Switch FS605 v3/FS608 v3 • AC power adapter • FS605 v3/FS608 v3 Installation Guide (this document) • Warranty and support information card • Vertical stand...

Page 4 - The Power light should light up.; Troubleshooting; The Power light is not lit; The switch has no power.; Technical Specifications

Install the Switch and Connect the OtherDevices 1. Place the switch on a flat surface using either the attached feet or the provided verticalstand. 2. For each device, insert one end of an Ethernet cable into the port in the device and insertthe other end into one of the Ethernet ports on the switch...

Other Netgear Models

All Netgear Other