Netgear ANT24BDC - Manual
Netgear ANT24BDC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – The package should contain
- Page 3 – Placement and Other Important Considerations
- Page 5 – Specifications; Description
- Page 8 – Statement of Conditions
- Page 9 – Technical Support; Support Information
Installation Guide
500mW Bi-directional Booster
ANT24BNA
Power Injector
ANT24BDC
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Introduction This section introduces the NETGEAR ANT24BNA 500 mW Bi-directional Booster and theNETGEAR ANT24BDC 6 VDC, 1.5A Power Injector and related components. The 500-milliwatt bi-directional power booster for the NETGEAR ME103 802.11b ProSafeWireless Access Point increases the transmission sign...
– Use a NETGEAR antenna cable of no more than 3 m between the Power Injector andthe access point. – For optimal performance, the combined length of both NETGEAR antenna cables should not exceed 13 m. If the length exceeds 13 m, the overall performancewill decrease. Antenna cables have intrinsic loss...
Specifications Installing the Booster with the Optional Power Injector Note: As noted in the illustration below, be sure to disconnect the DC power adapter from theANT24BNA Booster for 802.11b, and connect it to the NETGEAR ANT24BDC Power Injector. 7 6 Description 26.5 dBm minimum Frequency Range Op...
