Page 3 - System Features; HT-1KU Handheld Microphone
System Features 8W-1KU System • Unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation up to500 ft. line-of-sight • 1000 user-selectable UHF frequencies per band 8W-1KU Octo Receiver • Unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and oper...
Page 4 - Quick User Controls Guide
4 Quick User Controls Guide 8W-1KU Receiver: Front View 1. POWER BUTTON Press for two seconds to turn receivers ON-OFF 2. DIVERSITY A/B INDICATOR Indicates receiver A or B is active when transmitter is on 3. AF PEAK LED Shows flickering GREEN LED is normal or solid GREEN LED is for maximum audio all...
Page 6 - HT-1KU Handheld Transmitter
6 Quick User Controls Guide HT-1KU Handheld Transmitter 22. BATTERY COVER Unscrew CW and pull down to insert two AA alkaline batteries 23. MIC BALL Windscreen/dust cover 24. LCD DISPLAY For indication of GRP (00-09)/ CH (00-99), AUDIO INPUT LEVEL (0dB to -30dB), and BATTERY status (5 bars and “BATT....
Page 8 - Powering the Receiver; Input; System Operation; Button Function on the Receiver; MAIN MENU
Installing antennas Install antennas on back by connecting the two antennas (21) included with your system onto the two RF Connectors (14/19) located on the back of the 8W-1KU receivers. The two antennas must be installed in order for the diversity circuit to work properly. The optimal positions of ...
Page 9 - Selecting the 8W-1KU Receiver
9 During manual programming, the selected function will flash for five seconds or press the Set button to confirm the selection and the display will return to the main menu. The aUTO-SCan / aSC (IR Sync) Button (2) has two functions: • Long press (hold ~2 seconds) for AUTO- SCAN for finding a clear ...
Page 10 - adjusting the Squelch; Unbalanced audio
will flash for five seconds or press the Set button to confirm the selection and the display will return to the main menu. For detail how to IR Sync the TX, see IR Sync Programming in Programming sections of HT-1KU and BT-1KU transmitter sections. adjusting the Squelch In normal operation, each 8W-1...
Page 12 - Battery Compartment; Buttons Function; MAIN MENU; Powering the Transmitter On/Off; Power; Programming the HT-1KU
HT-1KU Handheld Microphone Transmitter Setting up the Transmitter The HT-1KU requires two AA size batteries to operate. To install the batteries onto the battery compartment, unscrew the Battery Compartment Cover (22) by turning counterclockwise until loose and slide down the cover, exposing the Bat...
Page 13 - Operating the HT-1KU; RF Power Switch
13 IR Sync Programming: Use the wireless IR leD Receptor Sensor (34) to download pre-programmed channels from the receiver. Start programming by holding the IR Receptor Sensor/Window about 6” in front the receiver to be used. On the receiver, when short pressing the aSC IR Sync Button (5), while the...
Page 14 - BT-1KU Bodypack Transmitter; aa; Connecting Input audio Source
14 decrease the RF power (reduced range). This is a useful feature as the “L” setting increases battery life and also optimizes the number of channels that can be used simultaneously in a given location. Use this setting for normal use not requiring maximum operating range. A range walk test before ...
Page 16 - Operating the BT-1KU
16 at -10dB for LT/HM and 0dB for GT. These settings are optimal for most applications. For normal operation, the transmitter should have the same Group/Channel as displayed on the receiver. The default factory setting is Group 01 (Receiver 1) and 02 (Receiver 2), 03 (Receiver 3) and 04 (Receiver 4)...
Page 17 - Specifications
17 Specifications SYSTeM OVeRall SPeCIFICaTIOnS Operating Frequency Range (U.S.) Band 1: 672.000-696.975MHz, (Int.) Band 2: 795.000-819.975MHz Freq. Synthesized (1000 channels switchable) 25kHz/ step Pll System Frequency Stability <0.005% Frequency Response 30Hz-18kHz +/-3dB Dynamic Range 120dB H...
Page 18 - Consumer Alert
18 lCD Display Group/ Channels/ Input Volume/ Battery Levels antenna Type External fixed Battery Type 2 x AA alkaline batteries operation Battery life 8-10 Hours typical Dimensions 2.5”W x 3.25”H x 1-13/16”D (6.35cm x 8.3cm x 1.82cm) Weight (w/o batteries) 3.8 oz (0.108 kg) Housing Construction Meta...
Page 19 - Unbalanced line; RF Interference and Finding Open; Cautions and Troubleshooting
19 Feedback Avoid acoustic feedback (howling or screeching) by taking care in selecting PA volume, transmitter location and speaker placement. Please also note the pickup pattern characteristics of the microphone selected. Unidirectional mics are more resistant to feedback. However, they pick up sou...
Page 20 - Miscellaneous Tips
• For optimal operation with external antennas, low loss RF shielded cable should be used and the length of the cable should not exceed 10 ft. (3 m). • The receiver antennas should be kept away from any metal surfaces whenever possible as they can reflect away or shield the incoming RF signal. • If ...
Page 21 - This is very important.
• When using the BT-1KU bodypack for instrument use: Scratchy noises can sometimes occur when an electric guitar with dirty pots or connections is used with a wireless system. Therefore, the supplied capacitor provides first-order filtering of the RF signal from the cord into the guitar and eliminat...
Page 22 - Frequency; Frequency Plan; Accessories; Part number; Service Information; Do not attempt to service this unit yourself as
Frequency Frequency Plan Band 1 (U.S.): 672.000-696.975MHz Band 2 (International): 795.000-819.975MHz 25KHz per step (1000 Channels) U.S. The 8U-1KU System Includes: User’ Manual (This manual) Main Receiver Unit Two antennas 8 combination (HT/ LT/GT) transmitters Lav Mic for LT GT cable for GT AC/DC...
Page 23 - One Year Limited Warranty; This warranty is subject to the following conditions:
One Year Limited Warranty Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects in material or workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, In...
