Nady MSE-100A - Manual - manualsarea.com

Page 2 - MULTIBAND SOUND ENHANCEMENT PROCESSOR; FEATURES

MSE-100A MULTIBAND SOUND ENHANCEMENT PROCESSOR • Professional multiband enhancer/exciter for all applications provides a subjective loudening of the audio and improves intelligibility, bass punch, pres- ence and transparency and reduces listening fatigue • Variable sound processing circuitry for sim...

Page 3 - WA R N I N G; IMPORTANT SAFETY INSTRUCTIONS; Read all instructions before using the product.

WA R N I N G IMPORTANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following: 1. Read all instructions before using the product. 2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, ...

Page 4 - INTRODUCTION

In the last two decades, sound enhancement systems such as enhancers, exciters, psycho-acoustic processors etc. havebecome an indispensable aid in the studio and have found widespread application in almost all film, broadcast and record-ing productions as well as in P.A. and sound reinforcement syst...

Page 5 - FRONT PANEL CONTROLS AND CONNECTIONS

1. POWER Switch with LED Indicator This switches the AC power ON or OFF. The integratedLED will light to indicate power ON.Note: In order to avoid possible undesired noise transientsin a live sound reinforcement application, switch on thepower to your MSE-100A before switching on the amplifi-cation ...

Page 6 - INPUTS; OUTPUTS; • Balanced use with XLR connectors:; FUSE HOLDER; REAR PANEL CONTROLS AND CONNECTIONS

10. INPUTS The MSE-100A is equipped with both 1/4” (6.3mm) TRS and XLR audio input jacks. These can be used for either bal-anced or unbalanced operation as follows: • Unbalanced use of mono 1/4” plugs: Tip = Signal, Sleeve = Ground / Shield. • Balanced use of TRS stereo 1/4” plugs: Tip = hot (+), Ri...

Page 7 - APPLICATIONS; Using the MSE-100A during replay

8 APPLICATIONS BASIC SETTINGSWe recommend setting the controls as indicated in the fol-lowing three sections. This will give you a better idea ofthe switch and control functions: 1. Set the MSE-100A channel (1 or 2) to bypass mode (the mode switch OUT and the red LED lit).Set the LOW Mix and the TUN...

Page 8 - Using the MSE-100A during tape duplication

9 APPLICATIONS ENHANCING THE SOUND OF TAPE DUPLICATIONSEven under the most favorable of conditions, presence,liveliness and transparency of the program material willsuffer during each copying process. These losses are par-ticularly obvious when copying cassettes while simultane-ously using a noise r...

Page 9 - Using the MSE-100A in a Hi Fi system; S P E C I F I C AT I O N S

10 APPLICATIONS Note: If the P.A. speakers are operated in mono, the second channel of the MSE-100A can be used for another application. ENHANCING THE SOUND OF MONITOR SYSTEMSThe MSE-100A can be effectively used to improve thesound of stage monitor systems. Here intelligibility andtransparency are o...

Page 10 - SERVICE FOR YOUR NADY AUDIO PRODUCT; DO NOT ATTEMPT TO SERVICE THIS UNIT

NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608 Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via tele-phone at (510) 652-2411, or e-mail at ...

Nady MSE-100A - Manual

Table of Contents:

Summary

Other Nady Models