Nady Encore I - Manual
Nady Encore I – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 5 – RF LEVEL DISPLAY; on the Encore I receiver will light up to 5 LEDs (4 green and 1 red); WHT-15 HANDHELD MICROPHONE TRANSMITTER
- Page 6 – WLT-15 LAVALIER/LAPEL OR HEADWORN MICROPHONE
- Page 7 – WGT-15 INSTRUMENT BODYPACK TRANSMITTER; RF DISPLAY LEDs
- Page 8 – THE LINK 2TM PLUG-IN TRANSMITTER
- Page 9 – SPECIFICATIONS; ENCORE I OVERALL SYSTEM PERFORMANCE; Nady DM-10D neodymium dynamic cartridge
- Page 10 – SERVICE; ENCORE I RECEIVER
Nady Wireless Systems are type accepted under FCC rules parts 90, 74 and 15. The
device complies with RSS-210 of Industry & Science Canada. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NADY SYSTEMS, INC.
6701 Shellmound Street • Emeryville, CA 94608 USA
Tel: 510/652-2411 • Fax: 510/652-5075
www.nadywireless.com
VHF Wireless Microphone System
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1. Unscrew the BATTERY COMPARTMENT COVER (17) and remove, exposing the BATTERY HOLDER (18) . Insert a fresh 9V ALKALINE BATTERY (19) , observing the correct polarity as marked, and screw the cover back on to the microphone. Makesure the cover is screwed on completely. A fresh alkaline battery can la...
1. Snap open the BATTERY COMPARTMENT (22) and insert a fresh 9V BATTERY (23) , observing the correct polarity. Close the compartment. 2. The WLT-15 is provided with a 3.5 mm LOCKING JACK (24) for connecting the microphone. Plug in either the LAVALIER/LAPEL (25) or the HEADWORN MICRO- PHONE (26) , as...
WGT-15 INSTRUMENT BODYPACK TRANSMITTER 12 1. Snap open the BATTERY COMPARTMENT (30) and insert a fresh 9V BATTERY (31) , observing the correct polarity. Close the compartment. The WGT-15 is providedwith a 3.5 mm LOCKING JACK (32) for connecting the INSTRUMENT CABLE (35) . To secure the connection, t...
