Nady 401XQUADLTE4F - Manual
Nady 401XQUADLTE4F – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – and servicing information.; sYsTeM feaTURes; • Noise-free transmitter ON/OFF operation; WHT Handheld Microphone Transmitter; sound, maximum feedback rejection and minimal handling noise; WGT & WLT Bodypack Transmitters; • Easily accessible input level adjust control for optimal sound
- Page 3 – opeRaTIon; Powering the Receiver; [Note: Any 16V DC source with 800mA capability; Connecting the Audio Output; [Note: To prevent possible undesired noises during use, leave
- Page 4 – a. Instrument Connection (using the WGT instrument transmitter)
- Page 5 – BATTERY
- Page 6 – WLT Lavalier/Lapel or Headworn Microphone; Bodypack Transmitter; use and keep it as straight as possible.]
- Page 7 – Headworn; Opening Battery Compartment
- Page 8 – BATTERY INDICATOR LED
- Page 10 – speCIfICaTIons; Overall SyStem PerfOrmance; omni or unidirectional lavalier mic or unidirectional; receIver
- Page 11 – seRvICe InfoRMaTIon; one YeaR lIMITeD WaRRanTY; This warranty is subject to the following conditions:
O W N E R ’ S M A N UA L
401x QUAD
4-Channel VHF Wireless Microphone System
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Table of ConTenTs System Features ................................................................................................................................ 2 Operation: 401X QUAD Receiver....................................................................................................... ...
3 opeRaTIon 401x QUAD Receiver 1. Powering the Receiver Plug the 16V AC/DC ADAPTER (1) provided into the DC INPUT JACK (11) on the back of the receiver. Then plug the power supply into an AC outlet. [Note: Any 16V DC source with 800mA capability can also be used.] Turn VOLUME CONTROL (6) for all fou...
4 a. Instrument Connection (using the WGT instrument transmitter) Insert an audio cord with a ¼” mono phone plug in the AF OUTPUT JACK (8) on the rear panel of the receiver. Plug the other end of the cord into amplifier, effect or mixing board. Adjust the VOLUME CONTROL (6) on the 401X QUAD clockwis...
