Murphy M5180-P - Manual
Murphy M5180-P – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Models M2582-P
and M5180-P
■
Pneumatically Open and Shut Off Fuel Gas
Automatically or Semi-automatically
■
Pneumatic Control Pressure Can Be
Air, Gas or Oil
■
Models for 2 in. or 1 in. (51 mm or
25 mm) Fuel Gas Lines
Description
The M2582-P and M5180-P are pneumatical-
ly controlled fuel shut-off valves that open
and close automatically or semi-automatical-
ly. The pneumatic control pressure can be air,
oil or gas. A manual lever aids in opening the
valve when control pressure is insufficient. A
gas escape vent, when properly vented and
maintained, releases trapped gas from the
valve after shutoff.
Basic Operation
Automatic:
As the control pressure/vacuum
increases the valve will open. When the control
pressure/vacuum decreases, the valve will close.
Semi-Automatic:
If the control pressure/vacuum
is too low and the valve does not open automat-
ically, it can be opened manually by lifting the
built-in lever arm and setting the latch. The
latch resets automatically when control pressure
rises enough to release it.
M2582-P
is for 1 in. (25 mm) gas lines. It auto-
matically opens at 2 psi (14 kPa) [.14 bar] and
fully opens the seat at 3 psi (21 kPa) [.21 bar].
The valve can be manually opened with the
lever and latch against inlet pressure of 80 psi
(552 kPa) [5.52 bar]. The latch will release after
pilot pressure reaches 2.5 psi (17 kPa) [.17 bar].
The M5180-P
is for 2 in. (52 mm) gas lines.
It automatically opens at 2 psi (14 kPa) [.14
bar] and fully opens the seat at 3 psi (21 kPa)
[.21 bar]. The valve can be manually opened
with lever and latched against inlet pressure
of 100 psi (689 kPa) [6.89 bar]. The latch will
release after pilot pressure reaches 2.5 psi (17
kPa) [.17 bar].
Specifications
Valve Body:
Sandcast aluminum
(alodined for corrosion resistance).
Optional steel body available on M5180-P
models only (see
How to Order
).
Valve Seat:
Buna-N
Valve Inlet Pressure (Maximum):
M2582-P:
80 psi (552 kPa) [5.52 bar]
M5180-P:
100 psi (689 kPa) [6.89 bar]
Parts Exposed to Gas Line Flow:
M2582-P:
•
Aluminum
•
Buna-N
•
302, 303, and 17-7 PH stainless steel
M5180-P:
•
Aluminum (Steel optional)
•
Buna-N
•
302, 303, 304, and 416 stainless steel
Control Diaphragm:
Flexweave polyester
fabric and Buna-N elastomer.
Control Pressure (Maximum):
M2582-P:
75 psi (517 kPa) [5.17 bar]
M5180-P:
80 psig (552 kPa) [5.52 bar]
How to Order
To order, use the diagram below.
______ – __
Model M2582-P
®
MURPHY
MATIC
Model
M2582-P
M5180-P
Body
Blank
= Aluminum
2
= Steel (applies to M5180-P)
PV-94129B
Revised 04-00
Catalog Section 55
(00-02-0126)
Pneumatic Valves for
Fuel Gas Shutoff
Warranty
A limited warranty on materials and workmanship
is given with this FW Murphy product. A copy of
the warranty may be viewed or printed by going to
www.fwmurphy.com/support/warranty.htm
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
