Murphy BCES-12-5 - Manual
Murphy BCES-12-5 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
0710182
02-29-08
Section 75
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.
MURPHY and the Murphy logo, are registered and/or common law trademarks of Murphy Industries, Inc. This document, including textual matter and
illustrations, is copyright protected by Murphy Industries, Inc., with all rights reserved. (c) 2007 Murphy Industries, Inc.
Battery Chargers – Sentry and Guardian Models
Features
•
High-quality constructed stainless steel cases,
suitable for wall mounting
•
Auto boost operation provides increased
output voltage when batteries are below a
preset point
•
Remote temperature compensation provides
control of output voltage based on temperature
•
Current limiting will only output the rated
current of the charger
The Sentry and Guardian battery chargers provide automatic, current limited and voltage controlled
charging to vented lead acid batteries. They may be used in a wise range of industrial charging
applications, including standby engines, pumps and generators.
Each unit consists of a transformer, rectifier and thyristor control circuit. The control circuit ensures that
the charger maintains a battery voltage at the pre-calibrated float level, while supplying any additional
load current up to the specified maximum.
Sentry Model
•
CE and UL approvals
•
Float Charging 5A at 12v
•
Auto boost operation
•
Electronic self-resetting output fuse protection
•
Temperature
compensation
•
Charge fail relay output
•
Stainless
steel
enclosure
Model W D H
Weight
BCES-12-5
11.1”
(281mm)
4.6”
(115mm)
5.5”
(140mm)
11.9 lbs
5.6Kg
Guardian Model
•
CE and UL approvals
•
Heavy duty float charging: 10A at 12/24 VDC,
20A at 24 VDC
•
Short circuit and reverse polarity protection
•
Lead acid calibrations
•
Auto boost operation
•
Charge fail relay output
•
Under volts and over volts alarms
•
Temperature
compensation
•
NFPA 110 alarms
Model W D H
Weight
BCEG-12-10
BCEG-24-10
10.83”
(275mm)
4.92”
(125mm)
11”
(280mm)
22 lbs
10.0Kg
BCEG-24-20 13.9”
(335mm)
5.71”
(145mm)
12.20”
(310mm)
38.5 lbs
17.5Kg
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
