Murphy 518E - Manual
Murphy 518E – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Specifications
Case:
Polycarbonate
Contact Rating:
10 A
Coil Circuit Resistance:
339 ohms ± 10% 12 Volt
678 ohms ± 10% 24 Volt
Minimum Latch Voltage:
12 Volt model:
10 VDC
24 Volt model:
20 VDC
Minimum Latch Current:
12 Volt model:
30 mA
24 Volt model:
30 mA
Operating Temperature Range:
-40 to 176°F (-40 to 80°C)
Installation and Operation of the
518PH, 518APH & 518E TATTLETALE
®
00-02-0187
Revised 10-06
Section 25
WARNING
BEFORE BEGINNING INSTALLATION OF THIS MURPHY PRODUCT
✔
✔
Disconnect all electrical power to the machine.
✔
✔
Make sure the machine cannot operate during installation.
✔
✔
Follow all safety warnings of the machine manufacturer.
✔
✔
Read and follow all installation instructions.
Please read the following information before installing
.
A visual inspection of this product for damage during shipping is
recommended before mounting. It is your responsibility to have a qualified person install this unit.
GENERAL INFORMATION
2-5/16 in.
(59 mm)
2-5/8 in.
(67 mm)
2-15/32 in.
(63 mm)
Applies to 518APH model.
9/16 in.
(14 mm)
13/16 in.
(21 mm)
Panel
Lockwasher
Hex
Nut
Instruction
Plate
TATTLETALE
®
25/64 in.
(10 mm) dia
1/4 in.
(6 mm) dia
Mounting Holes
Installation
Dimensions and Installation
“Loop Circuit” Wire Length in Miles @ 77°F (25°C)
Resistance in Ohms
Maximum recommended Loop Circuit resistance
for proper operation of TATTLETALE
®
.
CAUTION:
Certain dangers to human safety and to equipment may occur if some equipment is stopped without pre-warning. It is recommended
that monitored functions be limited to alarm only or to alarm before shutdown.
00-02-0187 page 1 of 2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
