Page 3 - Packing List
iii Packing List Before installing your board, insure that the following materials have been received:• 1 POS-564 all-in-one single board computer• 1 CD-ROM or disks for utility, drivers, and manual (in PDF format)• 1 warranty certificate• 1 FDD cable• 1 DMA/33/66 IDE flat cable• 1 startup manual If...
Page 5 - Contents; Chapter
v Table of Contents Contents Chapter 1 General Information ........................................2 1.1 Introduction ....................................................................... 2 1.2 Features ............................................................................. 3 1.3 Specificati...
Page 11 - General Information
CHAP T ER 1 General Information This chapter gives background infor-mation on the POS-564.Sections include: • Introduction• Features• Specifications• Board layout and dimensions
Page 12 - Chapter 1 General Information
POS-564 User’s Manual 2 Chapter 1 General Information 1.1 Introduction The POS-564 is a low cost, VIA Eden 400/667/800 (VIA Eden 400 is a fanless board) board especially designed for POS applications. The POS-564 is made with industrial grade construction that can better withstand constant 24 hour a...
Page 15 - Board Dimensions
5 Chapter 1 • Power requirements: typical 5 V@7 A (w/ Eden 400 MHz CPU & 128 MB RAM) • Operating temperature: 0 ~ 60× C (32 ~ 140× F)• Weight: 0.5 kg (1.1 lb) 1.4 Board Dimensions Figure 1.1: POS-564 Dimensions (Component Side)
Page 17 - Introduction
CHAP T ER 2 Introduction This chapter explains how to set up the POS-564 hardware, including instruc-tions on setting jumpers and connecting peripherals, switches and indicators. Be sure to read all the safety precautions before you begin the installation proce-dure.
Page 18 - Chapter 2 Introduction
POS-564 User’s Manual 8 Chapter 2 Introduction 2.1 Jumpers The POS-564 has a number of jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the board's jumpers. 2.2 Connectors On-board connectors link the POS-564 to external devices ...
Page 20 - Locating Jumpers and Connectors
POS-564 User’s Manual 10 2.3 Locating Jumpers and Connectors Figure 2.1: Locating jumpers CN18 CN5 CN33 CN40 CN37 J9 J12 CN30 CN36 CN35 CN29 J11 J8 CN28 CN34 CN39 J10 CN32 CN38 CN31 J6 J7 CN26 CN25 CN23 CN22 CN20 J5 CN17 CN13 CN10 CN9 CN7 CN6 CN4 CN2 CN3 J1 SK2 J4 CN16 CN21 CN24 CN15 CN12 CN11 CN14 ...
Page 21 - Safety Precautions
11 Chapter 2 2.4 Safety Precautions The following sections tell how to make each connection. In most cases, you will simply need to connect a standard cable. Warning! Always completely disconnect the power cord from your chassis whenever you are working on it. Do not make connections while the power...
Page 30 - VGA interface connections
POS-564 User’s Manual 20 2.11.1 Connecting the floppy drive 1. Plug the 34-pin flat-cable connector into CN17. Make sure that the red wire corresponds to pin one on the connector. 2. Attach the appropriate connector on the other end of the cable to the floppy drive(s). You can use only one connector...
Page 33 - Ethernet configuration
23 Chapter 2 2.18 LPT1 (primary parallel port) connectors (CN37) The primary parallel printer port is located at the rear edge of the board, and has a DB-25 connector. This printer port is typically used to connect a printer via an adapter cable. LPT1's IRQ setting is defined as IRQ7. You can select...
Page 35 - Software Configuration
CHAP T ER 3 Software Configuration This chapter details the software con-figuration information. It shows you how to configure the card to match your application requirements. Award system BIOS is covered in Chapter 4.
Page 36 - Chapter 3 Software Configuration
POS-564 User’s Manual 26 Chapter 3 Software Configuration 3.1 Introduction The POS-564 system BIOS and custom drivers are located in a 256 KB, 32-pin Flash ROM device, designated SK3. A single Flash chip holds the system BIOS and VGA BIOS. 3.2 Utility CD disk The POS-564 is supplied with a software ...
Page 37 - BIOS Program Setup
27 Chapter 3 3.3 BIOS Program Setup 1. At the prompt, type AWDFLASH.EXE and press <Enter>. The VGA configuration program will then display the following: 2. At the prompt, type in the BIN file which supports your display. When you are sure that you have entered the file name correctly press &l...
Page 38 - Connections for two standard LCDs
POS-564 User’s Manual 28 3.4 Connections for two standard LCDs 3.4.1 Connections for Toshiba LTM10C042 (640 x 480 TFT color LCD) Table 3.1: Connections for Toshiba LTM10C042 LTM10C042 POS-564 CN16 Pin Name Pin Name 1 GND 3 GND 2 CLK 35 SHFCLK 3 GND 4 GND 4 R0 27 PD18 5 R1 28 PD19 6 R2 29 PD20 7 GND ...
Page 41 - Award BIOS Setup
CHAP T ER 4 Award BIOS Setup This chapter describes how to set BIOS configuration data.
Page 42 - Chapter 4 Award BIOS Setup; System test and initialization
POS-564 User’s Manual 32 Chapter 4 Award BIOS Setup 4.1 System test and initialization These routines test and initialize board hardware. If the routines encoun-ter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors:...
Page 43 - Award BIOS setup
33 Chapter 4 4.2 Award BIOS setup Awardís BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. 4.2.1 Entering setup Power ...
Page 49 - PCI SVGA Setup
CHAP T ER 5 PCI SVGA Setup • Introduction• Installation of SVGA drivers -for Windows 95/98/Me -for Windows NT/2000/XP• Further information
Page 50 - Chapter 5 PCI SVGA Setup
POS-564 User’s Manual 40 Chapter 5 PCI SVGA Setup 5.1 Introduction The POS-564 has an onboard AGP flat panel/VGA interface. The specifi-cations and features are described as follows: 5.1.1 Chipset The POS-564 uses a VIA 8601A chipset from VIA Technology Inc. for its AGP/SVGA controller. It supports ...
Page 51 - Installation of the SVGA Driver
41 Chapter 5 5.2 Installation of the SVGA Driver Complete the following steps to install the SVGA driver. Follow the pro-cedures in the flow chart that apply to the operating system that you are using within your POS-564. The procedure to install VGA driver in Win 98, NT4.0 and XP are almost the sam...
Page 53 - Further Information
43 Chapter 5 5.3 Further Information For further information about the AGP/VGA installation in your PCM-9575, including driver updates, troubleshooting guides and FAQ lists, visit the following web resources: VIA website: www.via.com.tw Advantech websites: www.advantech.com www.advantech.com.tw
Page 55 - Audio Setup
CHAP T ER 6 Audio Setup The POS-564 is equipped with an audio interface that records and plays back CD-quality audio. This chapter pro-vides instructions for installing the soft-ware drivers included on the audio driver diskettes.
Page 56 - Chapter 6 Audio Setup; VIA Sound Blaster Pro compatible set up program
POS-564 User’s Manual 46 Chapter 6 Audio Setup 6.1 Audio setup The POS-564's on-board audio interface provides high-quality stereo sound and FM music synthesis (ESFM) by using the Realtek ALC201 audio controller. The audio interface can record, compress, and play back voice, sound, and music with bu...
Page 57 - Driver installation
47 Chapter 6 6.2.2 VIA Sound Blaster Installation Follow these steps to enable the Sound Blaster Pro compatible functions.1. Enable the Sound Blaster first on the BIOS setting of the "Onboard Legacy Audio" and "On-Chip Sound". 2. Run the "Install.exe". A:> INSTALL3. The pr...
Page 66 - Chapter 7 PCI Bus Ethernet Interface; Installation of Ethernet driver
POS-564 User’s Manual 56 Chapter 7 PCI Bus Ethernet Interface 7.1 Introduction The POS-564 is equipped with a high performance 32-bit Ethernet chipset which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD standards. It is supported by major network operating systems. It is also both 100Base-T an...
Page 72 - Appendix A DOC® 2000 Installation; A.1 DiskOnChip® 2000 Quick Installation Guide; A.1.1 DiskOnChip® 2000 installation instructions; A.1.2 Additional information and assistance
POS-564 User’s Manual 62 Appendix A DOC® 2000 Installation Guide A.1 DiskOnChip® 2000 Quick Installation Guide A.1.1 DiskOnChip® 2000 installation instructions 1. Make sure the target platform is powered OFF. 2. Plug the DiskOnChip® 2000 device into its socket. Verify the direction is correct (pin 1...
Page 75 - Pin Assignments
Appendi x B Pin Assignments This appendix gives instructions for installing PC/104 modules.
Page 76 - Appendix B Pin Assignments
POS-564 User’s Manual 66 Appendix B Pin Assignments B.1 Digital I/O ConnectorType: Box-Header 16-Pin 2.54mm (CN1 ) B.2 IR Connector Type: Wafer-Box 5-Pin 2.54mm (CN2) Table B.1: Digital I/O ConnectorType: Box-Header 16-Pin 2.54mm (CN1) Pin Pin name Pin Pin name 1 DIO IN1 2 +5V 3 DIO IN2 4 DIO OUT1 5...