MSI 865PE Neo3-V- User Manual

Page 2 - Preface

Preface Notice The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice. Note: Formosa21 will not be obligated to the responsibility outside the scope of VPON D...

Page 3 - Table of Contents; About the GUI Introduction

Table of Contents 1. VP-24/28/216 Introduction - --------------------------------------------------------------------------------1 1.1 Features------------------------------------------------------------------------------------------------------------1 2. VP-24/28/216 Series DVR Card Specification -...

Page 4 - VP-24/28/216 Introduction; Video & audio live surveillance; Adjustable recording quality for each camera.; Recording & Playback

1 1. VP-24/28/216 Introduction A VP-2x series package includes one of VP-24 or VP-28 or VP-216 video capture card and a DVR on chip DOM (optional). After install them in a PC, it becomes a dedicated DVR system after power up. The DVR System is a high performance digital video recorder with built-in ...

Page 6 - VP-24/28/216 Series DVR Card Specification

3 2. VP-24/28/216 Series DVR Card Specification Model: VP-24: Channels/Card 4 CODEC S/W MPEG4 Rec. FPS/Card(320x240) 40fps Rec. FPS/Card(640x480) 40fps MAX. Cards 4 MAX. Channels 16 Audio Recording YES Audio In/Card 1 MAX. Audio In 4 Audio Out 1 MAX. Alarm In 16 MAX. Control Out 8 Model: VP-28: Chan...

Page 7 - VP-24/28/216 Package Contents; Please check your VP-2x series package for the following items:

4 3. VP-24/28/216 Package Contents Please check your VP-2x series package for the following items: VP-24: 1. Capture card *1 2. Watchdog wire *1 3. Quick reference manual *1 4. CD *1 5. DOM Chip (Disk On Module) *1 Optional 6. I/O card *1 Optional 7. IrDA controller and receiver *1 Optional VP-28: 1...

Page 8 - VP-24/28/216 Series DVR Card Installation Procedure; Step 1 : Installing Motherboard; We recommend installing a good brand name 256MB DDR memory.; Note; Linux device drivers.

5 4. VP-24/28/216 Series DVR Card Installation Procedure 4.1 Summary of the installation: Before install VP-24/28/216 series DVR card to your PC platform, please make sure the PC’s Hardware is compatible with the motherboards, which we have recommended in the appendix. VP-2x series contains one of V...

Page 9 - capture cards are in the PCI slots.; Step 6: Installing the hard drives; cable onto the secondary IDE channel.; Or Installing the VP-20 DOM module; Capture card

6 Step 5: Installing VP-2x Capture Card Our capture card is proprietary and will only work with our DVR firmware. Install the capture card into an available PCI slot. Once the system boots the VPON firmware will automatically detect how many capture cards are in the PCI slots. Step 6: Installing the...

Page 10 - Video capture card

7 Step 8 : Installing I/O Card (Optional) GPI and GPO are use for alarm inputs and outputs control. Note : I/O card is an optional device, if you need it please contact us. 1) VP-24 2) VP-28 Video capture card (VP-28) Daughter board I/O card (VP-IO84) I/O card (VP-IO84) Video capture card (VP-24) DO...

Page 11 - and Install Firmware

8 3)VP-216 Step 9 : Power On and Install Firmware After complete hardware installation, you can power on the PC as usual and follow the procedure below for firmware installation: 1. Before install Firmware, enter BIOS first and select First boot device to CD-ROM. After boot up your system, you will ...

Page 14 - Graphic User Interface (GUI); Local surveillance GUI:

11 6. Graphic User Interface (GUI) 6.1 Introduction VP-24/28/216 can be configured using either the supplied remote control unit (optional) (or a keyboard) or a mouse. This chapter covers mouse operation. The VP-24/28/216 must be in GUI mode for mouse operation. Under GUI mode, keyboard is used ONLY...

Page 15 - PTZ Control

12 1. First, please change to single screen as following . 6.3 PTZ Control PTZ panel Use the PTZ panel to control PTZ (Pan, Tilt, Zoom) cameras. This panel is displayed when change to single screen. User can setup PTZ model in the “camera setup section”. PTZ panel: You can do preset and recall, zoom...

Page 17 - Appendix A: Recommendation Motherboard; Suggesting CPU model

I Appendix A: Recommendation Motherboard We have tested some different motherboards for VP-24/28/216. If You are first time to plug and play VP-24/28/216.We suggest you to choose the motherboard which have been tested by us for better performers 。 Suggesting CPU model ： Pentium 4, 1.6G or better ...

Page 18 - Appendix B: Watch-dog Wiring Description; Hardware Request list:

II Appendix B: Watch-dog Wiring Description Watch dog is a hardware device to monitor the system status. If the system fails to response, Watch dog will send a rest signal to the motherboard to reboot the system. To enable Watch dog function, please select available durations 100,99,98…..8 seconds. ...

MSI 865PE Neo3-V- User Manual

Table of Contents:

Summary

Other MSI Models