Msd 8110 Dist. Hold Down Clamp, Billet, Chevrolet Inst- User Manual
Msd 8110 Dist. Hold Down Clamp, Billet, Chevrolet Inst– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Billet Distributor Hold Down Clamp
PN 8110
Parts Included
1 - Billet Clamp
1 - 3/8" - 16 x 1" set screw
1 - 3/8" - 16 nut
1 - 3/8" Lock Washer
1 - 3/8" Flat Washer
Note: The position of the Billet Hold Down Clamp is imperative to its operation. The end points of
the clamp must seat squarely on the intake manifold as well as the distributor collar.
INSTALLATION
1. Install the set screw into the intake manifold using a 3/16" Allen wrench.
2. Install the Billet Clamp, flat washer, lock washer and the nut on the set screw.
3. Position the clamp on the distributor
collar and tighten the nut. Figure 1
shows the correct installation of the
clamp. If the clamp is excessively
angled and the end points of the clamp
do not properly seat, the clamp will not
tighten properly.
Figure 1 Correct Billet Hold Down Installation.
M S D I G N I T I O N
• w w w . m s d i g n i t i o n . c o m • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
