Moxa V481-XPE - Manual

— 1 —

— 2 —

— 3 —

ThinkCore V481-XPE

Quick Installation Guide

First Edition, November 2007

1. Overview

The ThinkCore V481 is an industrial, ready-to-run embedded computer
that supports VGA and audio, and comes with dual LAN ports, 8 serial
ports, a CompactFlash slot, and a USB port. The V481 is based on the
Intel x86 processor. The VGA interface makes the V481 especially
well-suited for industrial applications, such as SCADA, factory
automation, and applications that require an onsite HMI or monitor.

2. Package Checklist

Before installing the ThinkCore V481, verify that the package contains
the following items:

y

1 ThinkCore V481

y

Quick Installation Guide (this guide)

y

Document and Software CD

y

Din-rail Mounting Kit

y

100 cm RJ45-to-RJ45 Ethernet Cross-over Cable

y

20 cm Y-type Cable for Keyboard and Mouse
(CBL-MiniDIN6P/6Px2-20)

y

Terminal Block to Power Jack Converter (includes Terminal Block)

y

Product Warranty Statement

Optional Accessories

y

Switching power adaptor for the ThinkCore V481:
60W, 24 VDC output, 100 to 240 VAC input (power cord must be
ordered separately); Order No.: 1117224250210

y

Power Cords:
Power cord with Australian plug; Order No.: 1705010700510
Power cord with UK plug; Order No.: 1705010700410
Power cord with Euro plug; Order No.: 1705010700210
Power cord with straight US plug; Order No.: 1705010700110

NOTE: Notify your sales representative if any of the above items are
missing or damaged.

3. ThinkCore V481 Panel Layout

The following figures show the panel layouts of the ThinkCore V481.

Rear View

Top View

Front View

LED Indicators

There are 6 LED indicators located on the front panel of the ThinkCore
V481.

LED Name

LED Color

LED Function

Green

Power is on

Power

Off

No power is being received, or
power error exists

Yellow/Blinking

Data is being written to or read
form the storage unit

Storage

Off

Storage unit is idle

Yellow Tx/Link

Link LED

Off

Disconnected, or short circuit
exists

Orange

(LAN2 Only)

1000 Mbps Ethernet Mode
(Gigabit Ethernet)

Green

100 Mbps Ethernet Mode

LAN 1
LAN 2

Mode LED

Off

10 Mbps Ethernet Mode

4. Installing the ThinkCore V481

Wall or Cabinet Mounting

The ThinkCore V481 has built-in “ears” for attaching the embedded
computer to a wall or the inside of a cabinet. We suggest using two
screws per ear.

DIN-Rail Mounting

An aluminum DIN-Rail mounting kit is a standard accessory. If you need
to reattach the DIN-Rail mounting kit to the ThinkCore V481, make sure
the stiff metal spring is situated towards the top, as shown in the
following figures. Follow Steps 1 and 2 to mount the V481 on the
DIN-Rail.

To remove V481 from Din-rail, simply reverse Steps 1 and 2

.

5. Connector Description

Power Connector

Connect the 9 to 36 VDC LPS or Class 2 power line to the ThinkCore
V481’s terminal block. If the power is properly supplied, the Power LED
will light up.

Grounding the V481

Grounding and wire routing help limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection from the
ground screw to the grounding surface prior to connecting the power.

STEP1: Insert the top of the
DIN-Rail into the slot just below the
stiff metal spring.

STEP2: The DIN-Rail attachment
unit will snap into place as shown.

P/N:1802004810020