Moxa UC-7122 - Manual
Moxa UC-7122 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
— 1 —
— 2 —
— 3 —
UC-7122/7124
Quick Installation Guide
First Edition, July 2007
1. Overview
The UC-7122/7124 Series of mini size RISC-based ready-to-run
embedded computers come with the WinCE operating system
pre-installed. The embedded computers have dual 10/100 Mbps
Ethernet ports and 2 or 4 RS-232/422/485 serial ports in an ARM9 box.
In addition, the UC-7122 and UC-7124 have an internal SD socket and
one USB 2.0 host port for storage expansion, to provide high
performance communication and unlimited storage in a super compact,
palm-size box. The UC-7122 and UC-7124 are the right solutions for
embedded applications that use a lot of memory, but that must be
housed in a small physical space without sacrificing performance.
2. Package Checklist
Before installing the UC-7122/7124, verify that the package contains
the following items:
y
1 UC-7122 or UC-7124
y
UC-7122/7124 Quick Installation Guide
y
Document & Software CD
y
Cross-over Ethernet cable: RJ45 to RJ45, 100 cm
y
CBL-4PINDB9F-100 console port cable:
4-pin header to female DB9 cable, 100 cm
y
Universal Power Adaptor
y
Product Warranty Statement
Optional Accessories
y
DK-35A DIN-Rail Mounting Kit (35 mm)
Notify your sales representative if any of the above items are missing
or damaged.
3. UC-7122/7124 Panel Layout
The UC-7122/7124 come with 2 or 4 software selectable RS-232/422/485
serial ports, one RS-232 console port, two 10/100 Mbps LAN ports, one
internal SD slot, and one USB 2.0 host port. The following figures show
the panel layouts of the UC-7122/7124.
UC-7122
Ethernet x 2
(10/100BaseTx)
RS-232
Console Terminal
Internal SD Slot for
Storage Expansion
(remove cover to access)
12 to 48 VDC
Serial Port 2
(RS-232/422/485)
Serial Port 1
(RS-232/422/485)
P1
P2
TX
RX
P1
Ready
RESET
12-48V
LAN1
RS-232/422/485
Socket Inside
LAN2
UC-7112
UC-7124
Ethernet x 2
(10/100BaseTx)
RS-232
Console Terminal
Internal SD Slot for
Storage Expansion
(remove cover to access)
12 to 48 VDC
Serial Ports 1 to 4
(RS-232/422/485)
P1
P2
TX
RX
P1
Ready
RESET
12-48V
LAN1
RS-232/422/485
Socket Inside
LAN2
UC-7112
LED Indicators
The following LED indicators are located on the top panel of the
UC-7122/7124.
LED Name LED Color
LED Function
Green
Power is on and functioning normally
Ready
Off
Power is off or power error exists
Green
SD card is detected
SD
Off
No SD card is detected
Green
Serial ports P1-P4 transmitting data
TxD
P1-P4
Off
Serial ports P1-P4 not transmitting data
Yellow
Serial ports P1-P4 receiving data
RxD
P1-P4
Off
Serial ports P1-P4 not receiving data
4. Installing the UC-7122/7124
Wall or Cabinet Mounting
The UC-7122/7124 have built-in “ears” for attaching
the embedded computers to a wall or the inside of a
cabinet. We suggest using two screws per ear to
attach the UC-7122/7124 to a wall or cabinet. The
heads of the screws should be less than 6.0 mm in
diameter, and the shafts should be less than 3.5 mm
in diameter, as shown by the figure at the right.
6.0 mm
3.5 mm
DIN-Rail Mounting
DIN-rail attachments can be purchased separately to attach the product to
a DIN-rail.
P1
P4
P2
P3
TX
RX
P1
P2
P3
P4
TX
RX
Ready
SD
V+
12-48V
LAN1
RS-232/422/485
LAN2
Universal Communicator
P/N: 1802071220000
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
