Moxa AWK-1200-AP - Manual

1 1 Chapter 1 Introduction The following topics are covered in this chapter: ‰ Overview ‰ Package Checklist ‰ Product Features ‰ System Requirements ‰ Inline Power Injector (PoE)

2 2 Chapter 2 Getting Started This chapter describes the procedures for installing the AWK-1200-AP. The following topics are covered: ‰ First Time Installation and Configuration ‰ Locating the Data Input and PoE Ports ‰ What to Check before You Install the AWK-1200-AP ‰ Basic Configuration ¾ Basic C...

MOXA AirWorks AWK-1200-AP User’s Manual Getting Started 2-2 First Time Installation and Configuration After unpacking the system, make sure the following items are present and in good condition. Refer to pictures below to see what each item looks like. 1. AWK-1200-AP 2. Power cord 3. 48 VDC, 0.38A I...

MOXA AirWorks AWK-1200-AP User’s Manual Getting Started 2-3 Device Figures POE picture1 POE picture2 Figure 2-1 Power and Data Interface location on the PoE denoted by numbers 1-4. Mounting the AWK-1200-AP on a Wall or Mast y The AWK-1200-AP can be mounted on the wall, and you can use the Wall Mount...

MOXA AirWorks AWK-1200-AP User’s Manual Getting Started 2-4 What to Check before You Install the AWK-1200-AP Before installing the AWK-1200-AP for outdoor applications or hard-to-reach locations, we recommend configuring and testing all devices first. For configuring the AWK-1200-AP, please follow t...

MOXA AirWorks AWK-1200-AP User’s Manual Getting Started 2-5 Basic Configuration Basic Configuration Steps This section describes a basic 2-step configuration procedure to set up the AWK-1200-AP. Step 1: Modify the factory-default parameters on the web page “/BASIC/LAN/” , click Save Settings to save...

MOXA AirWorks AWK-1200-AP User’s Manual Getting Started 2-6 Step 3: Enter “root” in the Password fields, and then click Log In to enter the web configuration user interface screen as shown below. Figure 2-6 Web Configuration Structure The web configuration user interface shown above in Figure 2-6 is...

MOXA AirWorks AWK-1200-AP User’s Manual Getting Started 2-7 y STATUS ¾ DEVICE INFO ¾ WIRELESS ¾ LOGS ¾ STATISTICS y HELP ¾ MENU ¾ BASIC ¾ ADVANCED ¾ TOOLS ¾ STATUS ¾ GLOSSARY Move through the tree by clicking on an icon to expand or collapse the tree. The nodes on the tree represent web pages that a...

MOXA AirWorks AWK-1200-AP User’s Manual Getting Started 2-8 Get LAN IP From Choose DHCP (Dynamic) if your router supports DHCP and you want the router to assign an IP address to the AP. In this case, you do not need to fill in the fields shown below. Choose Static IP (Manual) if your router does not...

MOXA AirWorks AWK-1200-AP User’s Manual Getting Started 2-9 Figure 2-8 Configuring Wireless Encryption The AWK-1200-AP supports 64-bit and 128-bit WEP encryption. For 64-bit WEP encryption, an encryption key consists 10 hexadecimal characters (0-9 and A-F) or 5 ASCII characters. For 128-bit WEP encr...

MOXA AirWorks AWK-1200-AP User’s Manual Getting Started 2-10 Changing the Supervisor Account & Password Enter the TOOLS Æ ADMIN page, shown below in Figure 2-9 . Figure 2-9

MOXA AirWorks AWK-1200-AP User’s Manual Getting Started 2-11 ADMIN PASSWORD Change the ADMIN PASSWORD’s user name and password in the ADMIN PASSWORD Account field, click Save Setting , and then Reboot the Device to take activate the configuration changes. Upgrading the Firmware Updating the Firmware...

MOXA AirWorks AWK-1200-AP User’s Manual Getting Started 2-12 ATTENTION To meet regulatory restrictions and the safety of the installation, we strongly recommend this product is professionally installed .

3 3 Chapter 3 Web Console Configuration In this chapter, we will explain each web management page of the Web-based Network Manager. The following topics are covered in this chapter: ‰ Basic ¾ Wireless ¾ Advanced ‰ Tools ¾ Admin ¾ Time ¾ System ¾ Firmware ‰ Status ¾ Device Info ¾ Wireless ¾ Logs ¾ St...

MOXA AirWorks AWK-1200-AP User’s Manual Web Console Configuration 3-2 Basic Wireless The section is where you configure the wireless settings for your Access Point. Please note that changes made in this section may also need to be duplicated on your Wireless Client. To protect your privacy, use the ...

MOXA AirWorks AWK-1200-AP User’s Manual Web Console Configuration 3-3 802.11 Mode If all of your devices can connect in 802.11g Mode, you can change the mode to 802.11g only. If you have some devices that are 802.11b, leave the setting at Mixed. Super G™ Mode Super G without Turbo: Performance enhan...

MOXA AirWorks AWK-1200-AP User’s Manual Web Console Configuration 3-5 This option enables configuration of an optional second RADIUS server. A second RADIUS server can be used as backup for the primary RADIUS server. The second RADIUS server is consulted only when the primary server is not available...

MOXA AirWorks AWK-1200-AP User’s Manual Web Console Configuration 3-8 Tools Admin The Admin option is used to set a password for access to the Web-based management. By default, no password configured. We highly recommend that you create a password to keep your new Access Point secure. Admin Password...

MOXA AirWorks AWK-1200-AP User’s Manual Web Console Configuration 3-9 Restore Configuration from File Use this option to load previously saved Access Point configuration settings. Save Configuration To Wireless Network Setup Wizard If your PC’s operating system is Windows XP Service Pack 2 (SP2) or ...

MOXA AirWorks AWK-1200-AP User’s Manual Web Console Configuration 3-10 Reboot the Device This restarts the Access Point. Useful for restarting when you are not near the device. Restore all Settings to the Factory Defaults This option restores all configuration settings back to the settings that were...

MOXA AirWorks AWK-1200-AP User’s Manual Web Console Configuration 3-11 To upgrade the firmware, follow these steps: 1. Click the Browse button to locate the upgrade file on your computer. 2. Once you have found the file to be used, click the Upload button below to start the firmware upgrade process....

MOXA AirWorks AWK-1200-AP User’s Manual Web Console Configuration 3-13 Logs The Access Point automatically logs (records) events of possible interest in its internal memory. If there is not enough internal memory for all events, logs of older events are deleted, but logs of the latest events are ret...

MOXA AirWorks AWK-1200-AP User’s Manual Web Console Configuration 3-14 Click this button after changing Log Options to make them effective and permanent. Refresh Clicking this button refreshes the display of log entries. There may be new events since the last time you accessed the log. Clear Clickin...

A A Appendix A Specifications WLAN Standards IEEE802.11g/b for wireless LAN, IEEE802.3u 10/100BaseTX for Ethernet LAN, IEEE802.3af for Power over Ethernet Frequency Range 2.4-2.4835 GHz, Direct Sequence Spread Spectrum (DSSS) Data Rate & Modulation OFDM@54 Mbps, CCK@11/5.5 Mbps, DQPSK@2 Mbps and...

B B Appendix B Default Settings BASIC WIZARD CONNECTION SETUP WIZARD Parameter Description Default Value Password Web Login password Admin Verify Password root Time Time Zone GTM-08:00, Tijuana MICROSOFT WINDOWS CONNECT WIZARD WIRELESS SECURITY SETUP WIZARD Parameter Description Default Value Wirele...

MOXA AirWorks AWK-1200-AP User’s Manual Default Settings B-2 DHCP ENABLE Parameter Description Default Value Enable DHCP Server Select DHCP SETTING Parameter Description Default Value DHCP IP Address Range 192.168.127.100 ~ 192.168.127.199 Primary DNS 0.0.0.0 Secondary DNS 0.0.0.0 DHCP Lease Time 14...

MOXA AirWorks AWK-1200-AP User’s Manual Default Settings B-3 Transmission Rate BEST (Automatic) 802.11 Mode MIX 802.11g AND 802.11b Super G™ Mode Super G without Turbo WIRELESS SECURITY MODE Parameter Description Default Value Security Mode None ADVANCED MAC Address Filter Parameter Description Defa...

MOXA AirWorks AWK-1200-AP User’s Manual Default Settings B-4 SAVE AND RESTORE CONFIGURATION SAVE CONFIGURATION TO WIRELESS NETWORK SETUP WIZARD TIME TIME CONFIGURATION Parameter Description Default Value Time Zone GTM-08:00, Tijuana SET THE DATE AND TIME MANUALLY Parameter Description Default Value ...

C C Appendix C Regulatory Compliance Information 15.21 CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Prohibition of co-location This device and its antenna(s) must not be co-located or op...

MOXA AirWorks AWK-1200-AP User’s Manual Service Information C-2 Regulatory information / Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (includi...