Monte Carlo 5DH52 - Manual

Monte Carlo 5DH52

Monte Carlo 5DH52 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
Page: / 5

Table of Contents:

  • Page 2 – Installation; OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS; TOOLS REQUIRED; Phillips Screwdriver Wire Cutters Pliers Step Ladder
  • Page 3 – CANADIAN MOUNTING SYSTEM INSERT; CANADIAN SAFETY TIPS; All set screws must be checked and retightened
  • Page 4 – sections in this manual. If your fan is packaged with a light kit or
  • Page 5 – Trouble Shooting; Customer Service Center:; TROUBLE
Loading the manual

Quality Ceiling fans

Owner’s

Manual

Ceiling Fan Installation Instructions

For 5DH52 Series Fans

READ AND SAVE THESE INSTRUCTIONS

Total fan weight

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Installation; OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS; TOOLS REQUIRED; Phillips Screwdriver Wire Cutters Pliers Step Ladder

Unpack and inspect fan carefully to be certain all contents are included. (See exploded view parts list). Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70- 1999), including fire-rated construction. Use this un...

Page 3 - CANADIAN MOUNTING SYSTEM INSERT; CANADIAN SAFETY TIPS; All set screws must be checked and retightened

While fan and mounting plate are hanging from the safety cable, install the mounting plate to the outlet box using the two screws provided with the junction box. 2 CANADIAN MOUNTING SYSTEM INSERT Hang motor from hook on mounting plate. Use one closed holes. Proceed to step 7 of normal installation. ...

Page 4 - sections in this manual. If your fan is packaged with a light kit or

Install the screws removed in step # 5 and tighten all screws. 11 Attach blade brackets to blades using the blade bracket screws and washers provided. 12 For control of fan and optional light from wall location, follow diagram above. NOTE: A pro- fessional electrician is recommended for this type of...

Other Monte Carlo Models

All Monte Carlo Other