Monte Carlo 4BN44WHD Series - Manual
Monte Carlo 4BN44WHD Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS; AFETY; TOOLS REQUIRED; Phillips Screwdriver Wire Cutters Pliers Step Ladder; Remove the cotter pin and cross pin; Installation; Loosen the 2 set screws in yoke; Doow
- Page 3 – House; Safety cable installation
- Page 5 – Go to step 15 to; FFlluusshh M; Then go to steps
- Page 6 – ROUBLE; Customer Service Center at the; be locked, securely fasten a; Customer Service Center:
Q
UALITY
C
EILING FANS
Ceiling Fan Installation Instructions
For 4BN44WHD Series Fans
READ AND SAVE THESE INSTRUCTIONS
Total fan weight
with light kit
O
WNER
’
S
M
ANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes ANSI/NFPA 70- 1999), including fire-rated construction. Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer. After making the ...
Insert the Pin through the Yoke and Downrod until the point appears on the other side. Install the keeper to pin. 11 12 Place canopy on downrod. 7 Thread leadwires and safety cable through the downrod. 9 Insert downrod into yoke on top of the Fan Body. Align the hole in the Downrod with the hole in ...
Install finial nut by threading pull chain through hole in finial nut. Hand tighten finial nut securely. 32 Remove the plastic insert from each side of canopy. 35 Thread leadwires and safety cable through canopy. 37 Remove every other screw and save for future use. 36 Replace the 3 screws removed an...
