Monessen HBDV300N/PSC7 - Manual

Monessen HBDV300N/PSC7

Monessen HBDV300N/PSC7 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
Page: / 64

Table of Contents:

  • Page 2 – HBDV7 Series Direct Vent Gas Fireplace; CoNteNtS; Pre-Installation Information; thank you and congratulations on your purchase of a
  • Page 3 – IMPoRtANt SAFety INFoRMAtIoN; Any change to this fireplace or its controls can be dangerous.; ARNING; CARBoN MoNoxIDe PoISoNING:; Cleaning and Mainte-
  • Page 4 – lISteD VeNteD GAS FIRePlACe HeAteR; Manufactured; Standard for Manufactured Home Installations, ANSI/NCSBCS A225.1; WARNING; HOT GLASS
  • Page 6 – FIRePlACe DIMeNSIoNS and FRAMING DIMeNSIoNS; Framing Dimensions
  • Page 7 – Figure 2; PRe-INStAllAtIoN INFoRMAtIoN; Plan for the installation of your appliance. This; Figure 3; not; Venting; ote
  • Page 8 – CleARANCeS; top View; MANtel CleARANCeS; The combustible area above the facing must not protrude
  • Page 9 – SeCuRe FIRePlACe to FlooR or FRAMING; Figure 6; FINISHING MAteRIAl
  • Page 10 – oPtIoNAl toP VeNt APPlICAtIoN; Figure 8
  • Page 11 – VeNtING INStAllAtIoN INFoRMAtIoN; GeNeRAl VeNtING; location of Vent termination; feet or higher (top vent units only), the clearances for the
  • Page 12 – VeNtING INFoRMAtIoN; GeNeRAl VeNtING INFoRMAtIoN - teRMINAtIoN loCAtIoN; Canadian Installations
  • Page 13 – Termination Clearances; GeNeRAl INFoRMAtIoN ASSeMBlING VeNt PIPeS; uSA Installations; Flex Vent Pipes
  • Page 14 – tWISt loCK PIPeS; HoW to uSe tHe VeNt GRAPH; the point intersecting with the slanted graph line.; Refer to
  • Page 15 – VeNt INStAllAtIoN; ” feet or higher when top
  • Page 16 – VeNtING INStAllAtIoN; Noncombustible Walls:; Vent opening for Combustible Walls; opening for Noncombustible Wall; It is critical that there is no downward slope
  • Page 17 – Follow Steps 1 and on; toP VeNt SIDeWAll APPlICAtIoN; For all top vent installations where a 90° elbow is; certain
  • Page 19 – When using flex vent, the opening will have to be; Noncombustible Walls:; Hole opening must be 7; Secure firestop to the inside frame, center in the 9; Always install horizontal venting on a level
  • Page 20 – Support horizontal pipes every 36” (914
  • Page 21 – Figure; Do not back fill around snorkel.
  • Page 22 – upper Floor
  • Page 23 – Add additional vent lengths for proper height.
  • Page 24 – FIRePlACe INStAllAtIoN; INStAllAtIoN IteMS NeeDeD; ut
  • Page 25 – Natural Gas; From Gas Meter
  • Page 26 – MIllIVolt CHeCK GAS PReSSuRe and
  • Page 27 – eleCtRICAl INStAllAtIoN; . Do not extend beyond the wall switch wire; extended lengths of wire may cause the; Position the wall switch. Do not extend beyond the 15 feet of wire.; oPtIoNAl DC ReMote SySteMS; Receptacle
  • Page 28 – oPeRAtING INStRuCtIoNS - MIllIVolt; FoR youR SAFety ReAD BeFoRe lIGHtING; INItIAl lIGHtING
  • Page 29 – oPeRAtING INStRuCtIoNS - MIllIVolt; Continued on next page; APPRoVeD leAK teStING MetHoD; lIGHtING PIlot; DANG; lIGHtING PIlot FoR tHe FIRSt tIMe
  • Page 30 – control knob on; OFF; lIGHtING BuRNeR; MAIN BuRNeR SWItCH; Depress and turn the knob counterclockwise; PIlot PoSItIoN; Depress and turn knob clockwise; to tuRN oFF GAS
  • Page 31 – General
  • Page 32 – juNCtIoN Box WIRING; . Remove the external junction box cover by removing the; The connection is labeled “Wall Switch”. Unplug
  • Page 33 – Wall switch wires must be con-
  • Page 34 – Control Box; oPtIoNAl FAN BloWeR SySteMS
  • Page 35 – This must be done before framing the fireplace. When
  • Page 36 – oPeRAtING INStRuCtIoNS - SIGNAtuRe CoMMAND; • Do not attempt to light any appliance.; continued on next page
  • Page 37 – oPeRAtING INStRuCtIoNS; Read the safety information above.; to tuRN oFF GAS to APPlIANCe; Command Center; oFF
  • Page 38 – FeAtuReS; Control Board; BAtteRy INStAllAtIoN
  • Page 39 – SIGNAtuRe CoMMAND SySteM oPeRAtIoN INStRuCtIoNS; Remote transmitter learn Function (Default oFF); Key Combinations for System Settings; Function
  • Page 40 – flashes Green once every seconds, until reset.; Command Center operations:; The following functions are available on the Command Center.; Self Diagnostics Chart:
  • Page 41 – GlASS ReMoVAl; Release two clamps on bottom of fireplace.; BRICK INStAllAtIoN; panel to the fireplace with one retainer bracket and one screw.
  • Page 42 – FINAl INStAllAtIoN; Before starting, make sure the grate is hooked onto the
  • Page 43 – Place Right Log # by matching the two holes on the
  • Page 44 – Figure 67 (There is no
  • Page 46 – CleANING and MAINteNANCe; PIlot FlAMe; the pilot flame must always be pres-; BuRNeR; The type of installation, vent system configuration,
  • Page 47 – Do not remove the glass when hot.; loGS; Final Installation; Do not use fluids to clean ceramic fiber logs.; RoCK Wool; Final Installation
  • Page 48 – tRouBleSHootING; SyMPtoM
  • Page 50 – SIGNAtuRe CoMMAND SySteM
  • Page 51 – RePlACeMeNt PARtS
  • Page 52 – Description
  • Page 54 – lP to Natural Gas
  • Page 56 – Accessories
  • Page 58 – Venting Components; VeRtICAl VeNtING
  • Page 59 – HoRIZoNtAl VeNtING
  • Page 62 – Note ReGARDING VeNteD PRoDuCtS
  • Page 63 – lIMIteD lIFetIMe WARRANty PolICy; lIFetIMe WARRANty; serial number of your MHSC product.
  • Page 64 – Model
Loading the manual

HBDV7 Series
Direct Vent Gas Fireplace

Models:

HBDV300N/PV7, HBDV400N/PV7
HBDV300N/PSC7, HBDV400N/PSC7

WARNING

IF tHe INFoRMAtIoN IN tHeSe INStRuCtIoNS IS Not
FolloWeD exACtly, A FIRe oR exPloSIoN MAy
ReSult CAuSING PRoPeRty DAMAGe, PeRSoNAl
INjuRy oR loSS oF lIFe.

–

Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.

– WHAt to Do IF you SMell GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any

phone in your building.

• Immediately call your gas supplier from a neighbor's

phone. Follow the gas supplier's instructions.

• If you cannot reach your gas supplier, call the fire

department.

– I n s t a l l a t i o n a n d s e r v i c e m u s t b e p e r f o r m e d

by a qualified installer, service agency or the
gas supplier.

WARNING: Improper installation, adjustment, alteration,
services or maintenance can cause injury or property
damage. Refer to this manual. For assistance or additional
information consult a qualified installer, service agency
or the gas supplier.

this appliance may be installed in an aftermarket*,
permanently located, manufactured home (uSA only) or
mobile home, where not prohibited by local codes.
this appliance is only for use with the type of gas
indicated on the rating plate. this appliance is not
convertible for use with other gases, unless a certified
kit is used.

* Aftermarket: Completion of sale, not for purpose of resale, from the

manufacturer.

Due to HIGH teMPeRAtuReS, tHe APPlIANCe
SHoulD Be loCAteD out oF tRAFFIC AND
AWAy FRoM FuRNItuRe AND DRAPeRIeS.

CHIlDReN AND ADultS SHoulD Be AleRteD
t o t H e H A Z A R D S o F H I G H S u R F A C e
teMPeRAtuRe AND SHoulD StAy AWAy to
AVoID BuRNS oR ClotHING IGNItIoN.

youNG CHIlDReN SHoulD Be SuPeRVISeD
WHeN tHey ARe IN tHe SAMe RooM AS tHe
APPlIANCe.

ClotHING oR otHeR FlAMMABle MAteRIAl
SHoulD Not Be PlACeD oN oR NeAR tHe
APPlIANCe.

KeeP tHe RooM AReA CleAR AND FRee FRoM
CoMBuStIBle MAteRIAlS, GASolINe, AND
otHeR FlAMMABle VAPoRS AND lIquIDS.

INStAlleR: leave this manual with the appliance.
CoNSuMeR: Retain this manual for future refer-
ence.

54D8000 1/10 Rev. 3

548000
HBDV7 cover

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - HBDV7 Series Direct Vent Gas Fireplace; CoNteNtS; Pre-Installation Information; thank you and congratulations on your purchase of a

HBDV7 Series Direct Vent Gas Fireplace 54D8000 CoNteNtS Important Safety Information ................................... 3Code Approval ........................................................... 4Product Features ....................................................... 5 High Elevations ...............

Page 3 - IMPoRtANt SAFety INFoRMAtIoN; Any change to this fireplace or its controls can be dangerous.; ARNING; CARBoN MoNoxIDe PoISoNING:; Cleaning and Mainte-

HBDV7 Series Direct Vent Gas Fireplace 54D8000 3 IMPoRtANt SAFety INFoRMAtIoN INStAlleR Please leave these instructions with the appliance. oWNeR Please retain these instructions for future reference. • Read this owner’s manual carefully and completely before trying to assemble, operate, or service ...

Page 4 - lISteD VeNteD GAS FIRePlACe HeAteR; Manufactured; Standard for Manufactured Home Installations, ANSI/NCSBCS A225.1; WARNING; HOT GLASS

HBDV7 Series Direct Vent Gas Fireplace 4 54D8000 IMPoRtANt SAFety INFoRMAtIoN 14. Do not use any solid fuels (wood, coal, paper, card- board, etc.) in this fireplace. Use only the gas type indicated on rating plate. 15. This appliance, when installed, must be electrically grounded in accordance with...

Other Monessen Models

All Monessen Other