M&K Sound MPS-5410 - Manual

Page 2 - SAFETY INSTRUCTIONS

1. SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All safety and operating instructions should be read before this product is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS - All warnings on this product and in the opera...

Page 4 - Setup Disk

2. INTRODUCTION Congratulations and thank you for purchasing the MPS-5310. Miller & Kreisel Professional poweredsubwoofers are designed to provide many years of accurate and problem free operation. We strongly encourage you to read this owner's manual, as there is a great deal of information pro...

Page 5 - QUICK PRODUCT OVERVIEW; SUBWOOFER PLACEMENT; Methodology For Placing Subwoofers

4. QUICK PRODUCT OVERVIEW The MPS-5310 is a 350-Watt powered subwoofer that is certified for THX pm3 applications with referencelevel output in rooms up to approximately 3000 Cubic Feet in volume (multiple subs can be used for larg-er room applications). The MPS-5310 features M&K Professional’s ...

Page 6 - smoothest and best response has been achieved.; INPUTS AND CONTROLS

As you walk around the room, be sure to pay careful attention to where the spectral response is smoothestand has the greatest low frequency extension. Pay special attention to the corners and along the walls.Remember, because the subwoofer is basically omni-directional, the best spot for the subwoof...

Page 7 - A) Mono Balanced Input; - In the THX position of the switch the low-pass filter of the; E) Standard IEC Power Cord Receptacle; THX Position; Variable Gain Knob; - Variable gain knob provides gain settings from -; Left Un-balanced Input

A) Mono Balanced Input - 61K Ohms balanced input connector - 200mv in produces 90dB of output (Reference/THX input sensitivity mode). Pin Polarity: 1. Ground2. Plus3. Minus B) Variable Low-Pass Filter - 50Hz to 125Hz, 36dB per octave low-pass filter. This optional adjustment is activated by setting ...

Page 8 - RESPONSE AND SENSITIVITY ADJUSTMENTS; Using the MPS-5310 with External Bass-Management Electronics; For the setup procedure you will need the following equipment:

7. RESPONSE AND SENSITIVITY ADJUSTMENTS The MPS-5310 features user adjustable response, sensitivity and crossover adjustments in order to allowfor easy integration into any monitoring system or acoustical space. Make sure to use the settings thatbest match your specific components so that double fil...

Page 9 - bass management system.; The Test CD; The test CD has three tracks on it to aid in setup.; System Calibration; Remove all EQ from the mixer channels and the signal path.; Calibration of the front and surround speakers:; For each of the front and surround speakers do the following.

E. M&K speaker system with an LFE-4 Bass Management Controller or some other form of bass management system. 2. If possible, have one person sit at the listening/monitoring position and read the SPL meter, whileanother person adjusts the trim pots. The SPL meter should be held at arm’s length at...

Page 10 - HEARING PERCEPTIONS AND BASS MANAGEMENT

3. Select CD track #1 and set your SPL meter for C weighting and slow response. Have your assistant sit in the listening position, and hold the SPL meter at armís length and at ear height, pointed towards the speaker at a slight upward angle and read the SPL. Then using a small flat bladed screwdriv...

Page 12 - Bass Management is the defacto standard in the home.

Main channel speakers, in a system that has Bass Management, can be small and can be placedwhere large full range speakers can’t. Unlike two-channel stereo, multichannel audio requires that speakers be placed in very specific locations.In video post it means placing speakers close to the sides and t...

M&K Sound MPS-5410 - Manual

Table of Contents:

Summary

Other M&K Sound Models