Page 3 - SAFETY PRECAUTIONS; attention to safety to handle the product correctly.; output status of the system will be as shown below.; DANGER
A - 1 SAFETY PRECAUTIONS (Read these precautions before using this product.) Before using this product, please read this manual and the relevant manuals carefully and pay full attention to safety to handle the product correctly. In this manual, the safety precautions are classified into two levels: ...
Page 5 - CAUTION
A - 3 [Installation Precautions] CAUTION Use the programmable controller in an environment that meets the general specifications in the QCPU User's Manual (Hardware Design, Maintenance and Inspection).Failure to do so may result in electric shock, fire, malfunction, or damage to or deterioration of ...
Page 9 - REVISIONS; *The manual number is given on the bottom left of the back cover.; Print date; First edition
A - 7 REVISIONS *The manual number is given on the bottom left of the back cover. Japanese manual version SH-080806-A 2008 MITSUBISHI ELECTRIC CORPORATION Print date *Manual number Revision Dec., 2008 SH(NA)-080811ENG-A First edition This manual confers no industrial property rights or any rights of...
Page 10 - Memo
Page 11 - INTRODUCTION; Relevant CPU module; Remark; CPU module; Universal model QCPU
A - 9 INTRODUCTION This manual describes the function of the Universal model QCPU using Ethernet communication. Before using this product, please read this manual and the relevant manuals carefully and develop familiarity with the functions and performance of the Q series programmable controller to ...
Page 12 - CHAPTER1 OVERVIEW
CONTENTS A - 10 CONTENTS SAFETY PRECAUTIONS ...................................................................................................................... A - 1REVISIONS .........................................................................................................................
Page 14 - MANUALS; Number
A - 12 MANUALS To understand the main specifications, functions, and usage of the CPU module, refer to the basic manuals.Read other manuals as well when using a different type of CPU module and its functions.Order each manual as needed, referring to the following list. The numbers in the "CPU mo...
Page 15 - Other relevant manuals; Manual name
A - 13 Other relevant manuals QnPHCPU/QnPRHCPU Programming Manual (Process Control Instructions) < SH-080316E (13JF67) > Dedicated instructions for process control Manual name Description CC-Link IE Controller Network Reference Manual < SH-080668ENG (13JV16) > Specifications, procedures ...
Page 16 - MANUAL PAGE ORGANIZATION; In addition, this manual uses the following types of explanations.
A - 14 MANUAL PAGE ORGANIZATION In addition, this manual uses the following types of explanations. In addition to description of the page, notes or functions that require special attention are described here. Remark The reference related to the page or useful information are described here. Referenc...
Page 17 - GENERIC TERMS AND ABBREVIATIONS; Generic term/abbreviation
A - 15 GENERIC TERMS AND ABBREVIATIONS Unless otherwise specified, this manual uses the following generic terms and abbreviations. * indicates a part of the model or version. (Example) : Q33B, Q35B, Q38B, Q312B Q3 B Generic term/abbreviation Description Series Q series Generic term for Mitsubishi ME...
Page 18 - as GX Developer and displays a list.
1 - 1 CHAPTER1 OVERVIEW 1.1 Features The features specific to the Built-in Ethernet port QCPU are described below. (1) GX Developer/GOT connection ( Section 3.1) • The Find CPU function makes it possible to find the Built-in Ethernet port QCPU connected to the same hub as GX Developer and displays a...
Page 19 - CHAPTER2 COMMUNICATION SPECIFICATIONS; Item
2 - 1 CHAPTER2 COMMUNICATION SPECIFICATIONS 2 CHAPTER2 COMMUNICATION SPECIFICATIONS Table2.1 shows the communication specifications for built-in Ethernet ports of the CPU module. *1 : Straight cables can be used. Crossing cables can also be used for connecting the Built-in Ethernet port QCPU with GO...
Page 20 - Function
3 - 1 CHAPTER3 COMMUNICATION FUNCTION VIA BUILT-IN ETHERNET PORTS OF CPU MODULE The Built-in Ethernet port QCPU can communicate data by connecting built-in Ethernet ports of the CPU module with personal computers and/or display devices using an Ethernet cable (100BASE-TX, 10BASE-T). For the comparis...
Page 22 - The setting for the CPU module is described below.
3 - 3 3.1.1 Setting for CPU module The setting for the CPU module is described below. (1) PLC parameter setting Set the items in the Built-in Ethernet port tab of the PLC parameter dialog box as shown in Figure 3.3. 1) Set the CPU module IP address. 2) Set the connection for GX Developer (MELSOFT co...
Page 24 - Setting on GX Developer side is described below.
3 - 5 3.1.2 Setting on GX Developer side Setting on GX Developer side is described below. 1) Select "Ethernet board" for "PC side I/F". Select a protocol to be used in the Ethernet board setting screen as shown in Figure 3.6. • Network No., Station No.: Not used. • Protocol: Select t...
Page 27 - (4) Communication with MELSOFT devices in UDP protocol
3 - 8 CHAPTER3 COMMUNICATION FUNCTION VIA BUILT-IN ETHERNET PORTS OF CPU MODULE 3 3.1 GX Developer/GOT Con nection 3.1.3 Pr ecautions (4) Communication with MELSOFT devices in UDP protocol To communicate with multiple MELSOFT devices using the UDP protocol, set the same number of protocols as MELSOF...
Page 30 - Communication setting in GX Developer
3 - 11 3.2.1 Communication setting in GX Developer Set the items on the Transfer Setup screen in GX Developer as shown in Figure 3.16. 1) Select "Ethernet board" for "PC side I/F". 2) Select "PLC module" for "PLC side I/F". Check the "Ethernet port direct connecti...
Page 31 - (3) Conditions that disallow direct connection
3 - 12 CHAPTER3 COMMUNICATION FUNCTION USING BUILT-IN ETHERNET PORTS OF CPU MODULE 3 3.2 GX Developer Dire ct C onnection ( S imple Conn ection) 3.2.2 Pr ecautions 3.2.2 Precautions The following are the precautions must be taken when directly connecting the Built-in Ethernet port QCPU with GX Devel...
Page 32 - MC Protocol Communication
3 - 13 3.3 MC Protocol Communication Built-in Ethernet ports of the Built-in Ethernet port QCPU enable communication using the MC protocol *1 . External devices such as personal computers and display devices read/write device data from/to the CPU module using the MC protocol.External devices monitor...
Page 33 - Setting for MC protocol communication; to FFFE
3 - 14 CHAPTER3 COMMUNICATION FUNCTION USING BUILT-IN ETHERNET PORTS OF CPU MODULE 3 3.3 MC P rotocol C ommunication 3.3.1 Set ting fo r MC pr otocol communica tion 3.3.1 Setting for MC protocol communication Setting for communication using the MC protocol is described below.Set the items of followi...
Page 36 - (4) Precautions when UDP protocol is selected; new request message is discarded.; Communication frame
3 - 17 3.3.4 Precautions (1) Number of connected modules In the connection with external devices using the MC protocol, the number of CPU modules set as "MELSOFT connection" in the open settings on Built-in Ethernet port tab of PLC parameter can be connected simultaneously. (2) Data communic...
Page 38 - Error codes for communication using MC protocol
3 - 19 3.3.5 Error codes for communication using MC protocol Table3.5 shows the error codes, error descriptions, and corrective actions that will be sent from the CPU module to an external device when an error occurs during communication using the MC protocol. Table3.5 List of available devices in C...
Page 40 - • At special relay ON.
3 - 21 3.4 Time Setting Function (SNTP Client) The Built-in Ethernet port QCPU collects time information from a time information server connected to LAN, making it possible to set the CPU time automatically.The Built-in Ethernet port QCPU time setting function queries a time information server to ge...
Page 43 - A function for storing CPU module files in an external device.
3 - 24 CHAPTER3 COMMUNICATION FUNCTION USING BUILT-IN ETHERNET PORTS OF CPU MODULE 3 3.5 F ile Tr ansfer F unction ( F T P ) 3.5 File Transfer Function (FTP) The Built-in Ethernet port QCPU supports the FTP (File Transfer Protocol) server function. FTP is a protocol for transferring files between CP...
Page 50 - GX Developer Version 8 Operating Manual; How to read descriptions; Sections in brackets at [Specification format] can be omitted.
3 - 31 3.5.4 How to read FTP commands (1) FTP command descriptions The FTP operation commands (on the FTP client (external device) side) which can be used in the Built-in Ethernet port QCPU are described below. (2) File specification methods File specification method which is specified during execut...
Page 51 - binary
3 - 32 CHAPTER3 COMMUNICATION FUNCTION USING BUILT-IN ETHERNET PORTS OF CPU MODULE 3 3.5 F ile Tr ansfer F unction ( F T P ) 3.5.5 D etail of F T P commands 3.5.5 Detail of FTP commands Functions and usages of FTP operation commands (on the FTP client side) which can be used in the Built-in Ethernet...
Page 53 - mget
3 - 34 CHAPTER3 COMMUNICATION FUNCTION USING BUILT-IN ETHERNET PORTS OF CPU MODULE 3 3.5 F ile Tr ansfer F unction ( F T P ) 3.5.5 D etail of F T P commands mget [Function] Reads a file from the Built-in Ethernet port QCPU.To read multiple files, specify the file names and extensions within the file...
Page 55 - change
3 - 36 CHAPTER3 COMMUNICATION FUNCTION USING BUILT-IN ETHERNET PORTS OF CPU MODULE 3 3.5 F ile Tr ansfer F unction ( F T P ) 3.5.5 D etail of F T P commands (2) Built-in Ethernet port QCPU dedicated subcommands The Built-in Ethernet port QCPU dedicated subcommands added to and sent with the FTP oper...
Page 57 - run; status
3 - 38 CHAPTER3 COMMUNICATION FUNCTION USING BUILT-IN ETHERNET PORTS OF CPU MODULE 3 3.5 F ile Tr ansfer F unction ( F T P ) 3.5.5 D etail of F T P commands run [Function] Changes the Built-in Ethernet port QCPU status to RUN. (Executes remote RUN.) When changing the Built-in Ethernet port QCPU stat...
Page 58 - stop
3 - 39 stop [Function] Changes the Built-in Ethernet port QCPU status to STOP. (Executes remote STOP.) [Specification format] quote stopThe following message is displayed as the execution result upon normal completion.200 Command successful [Note] Write files to the program memory after the Built-in...
Page 59 - card. If any of these operations are performed, files may corrupt.
3 - 40 CHAPTER3 COMMUNICATION FUNCTION USING BUILT-IN ETHERNET PORTS OF CPU MODULE 3 3.5 F ile Tr ansfer F unction ( F T P ) 3.5.6 Pr ecautions 3.5.6 Precautions Precautions for using the file transfer function are described below. (1) FTP clients • FTP command specifications may differ from those d...
Page 62 - Communication method when a remote password is set
3 - 43 3.6.1 Communication method when a remote password is set The communication procedure with the Built-in Ethernet port QCPU with a preset remote password is described below. (1) Access enable processing (unlock processing) An external device such as a personal computer performs remote password ...
Page 63 - Setting method for remote password is described below.; (1) Setting remote password and writing parameters to CPU module
3 - 44 CHAPTER3 COMMUNICATION FUNCTION USING BUILT-IN ETHERNET PORTS OF CPU MODULE 3 3.6 R emote Passwor d 3.6.2 R emote password setting 3.6.2 Remote password setting Setting method for remote password is described below. (1) Setting remote password and writing parameters to CPU module Set the remo...
Page 64 - Use the dedicated commands for the MC protocol.
3 - 45 (2) Enabling parameter settings After writing parameter settings to the CPU module, settings are enabled by powering the programmable controller ON or resetting the CPU module. (3) Performing remote password unlock/lock processing Perform the remote password unlock/lock processing from an ext...
Page 65 - (1) Setting remote password to UDP connections; The CPU module automatically performs lock processing.
3 - 46 CHAPTER3 COMMUNICATION FUNCTION USING BUILT-IN ETHERNET PORTS OF CPU MODULE 3 3.6 R emote Passwor d 3.6.3 Pr ecautions 3.6.3 Precautions Precautions for the remote password check function are described below. (1) Setting remote password to UDP connections • Determine the communication target ...
Page 66 - Detection and corrective action of unauthorized access; Perform the following corrective action as needed.
3 - 47 3.6.4 Detection and corrective action of unauthorized access When remote password mismatch count reaches the upper limit during unlock processing, an error (error code: 2700) occurs in the Built-in Ethernet port QCPU.The error cause is considered to be unauthorized access from outside of the ...
Page 67 - App; APPENDICES; Appendix 1 Specifications Comparison with Ethernet Module
APPEN- DIX Appendix 1 Specificat ions Co mpar ison w ith Ether net Module APPENDICES App - 1 APPENDICES Appendix 1 Specifications Comparison with Ethernet Module TableApp.1 shows the specifications comparison between the Ethernet port of the Built-in Ethernet port QCPU and the Ethernet module (QJ71E...
Page 70 - Index; INDEX
Index - 1 INDEX [B] Built-in Ethernet port QCPU . . . . . . . . . . . . . . . . A-15 [C] CPU module . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-15Communication function via built-in Ethernet ports of CPU module . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1Communication spec...
Page 71 - Warranty; Gratis Warranty Term and Gratis Warranty Range; caused by the user's hardware or software design.; Onerous repair term after discontinuation of production
Warranty Please confirm the following product warranty details before using this product. 1. Gratis Warranty Term and Gratis Warranty Range If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsubishi occurs during use of theproduct within the gratis warranty...
