Mitsubishi R100- User Manual
Mitsubishi R100– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Confirming the Package Contents; Please procure the pipes to be connected to the kit locally.
- Page 3 – CAUTION
- Page 4 – Insulation Cover Installation; Overlap margin of the tape; Pipe Connection Example; Miscellaneous Notes
¡
For your safety, thoroughly read the following instructions prior to installation.
WARNING and CAUTION are used in this manual to indicate possible hazards.
Safety Precautions
¡
Thoroughly read the following “Safety Precautions” prior to installation to ensure proper installation.
¡
Observe the following important safety precautions at all times.
¡
Hazards that can occur from incorrect handling are classified by the symbols below:
Mitsubishi Electric Air Conditioner CITY MULTI
Twinning Kit Installation Manual
WARNING
CAUTION
WARNING
Incorrect handling can result in death or serious injury.
Incorrect handling can result in bodily injury and/or structure damage.
❈
See the Installation Manual that came with the outdoor unit for how to install the outdoor
unit.
CAUTION
Only a dealer or qualified technician should
perform installation.
¡
Improper installation may result in refrigerant gas leakage
and equipment damage.
Do not make any modifications or alterations.
Consult your dealer for repair.
¡
Improper installation may result in water leakage, electric shock,
or fire.
In the event of a refrigerant leak, thoroughly
ventilate the room.
¡
If refrigerant leaks out and comes in contact with an open
flame, toxic gases will be generated.
P r o p e r l y i n s t a l l a l l p a r t s a c c o r d i n g t o t h e
instructions in the Installation Manual.
¡
If the wrong type twinning pipe or wrong size connecting pipe
is used, air conditioning performance will suffer.
When installing or relocating the unit, check
t h a t n o s u b s t a n c e o t h e r t h a n t h e s p e c i f i e d
refrigerant (R410A) enters the refrigerant circuit.
¡
Any presence of foreign substance or air can cause abnormal
pressure rise or explosion.
After installation, check for a refrigerant leak.
¡
If leaked refrigerant comes in contact with a heat source,
such as a fan heater, stove, or electric grill, toxic gases will be
generated.
Properly dispose of packing materials.
¡
Plastic bags can pose suffocation and choking hazards: keep
them out of the reach of children. Tear the plastics bags
before disposing of them.
D o n o t t o u c h t h e r e f r i g e r a n t p i p e s a n d
r e f r i g e r a n t c i r c u i t c o m p o n e n t s w i t h b a r e
hands during and immediately after operation.
¡
During or immediately after operation, certain parts of the unit
such as pipes and compressor may be either very cold or hot,
depending on the state of the refrigerant in the unit at the
time. To reduce the risk of frostbites and burns, do not touch
these parts with bare hands.
1
CMY-R100VBK, CMY-R200VBK
WT05221X01
WT05221X01.qx 07.9.5 10:58 AM ページ1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1. Confirming the Package Contents The following items are included with the Twinning Kit (CMY-R100VBK, CMY-R200VBK). Verify that all items are present beforestarting installation. ❈ If the pipes on site do not fit the parts in the kit, use the parts listed below. (1) Package contents Model CMY-R100...
(3) Routing the pipe through the bottom (1) Braze item 7 High-pressure pipe to the Stop valve so that the dimples on the pipe are on an imaginary line parallel to the edge of the cutout hole. Expand the end of the on-site pipes, and braze themto item 7 High-pressure pipe. (2) Fix item 1 Low-pressure...
WT05221X01 4. Insulation Cover Installation Install the insulation cover on the twinning kit after brazing pipes and twinning kit. Insulate all refrigerant pipes including the pipes on site. Insulate the high-pressure and low-pressure pipes separately and inside theunit as well as the outside. Use h...
