Page 2 - Basic Operation; Table of Contents
Important Information .......................................................................................................................... 1Safety Precautions, Maintenance, & Recommended Use ................................................................. 2Contents ..........................
Page 3 - Important Information; Canadian Department of Communications Compliance Statement
1 Important Information Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CS...
Page 4 - Safety Precautions, Maintenance & Recommended Use
2 CAUTION Immediately unplug your monitor from the wall outlet and referservicing to qualified service personnel under the followingconditions:• When the power supply cord or plug is damaged. • If liquid has been spilled, or objects have fallen into the monitor. • If the monitor has been exposed to ...
Page 5 - Contents; Your new MLM400 monitor box* should contain the following:
3 MLM400 LCD MONITOR MODEL MLM400 User Manual Contents * Install an attached stand at the time of unpacking when it uses with the stand. * Remember to save your original box and packing material to transport or ship the monitor. Your new MLM400 monitor box* should contain the following: • LCD monito...
Page 6 - Attaching LCD Options; Lay the screen face down
4 You can attach mounting accessories to the LCD monitor in one of thefollowing two ways: 1. In the upright position Ventilation Requirements for enclosure mounting To allow heat to disperse, leave space between surrounding objectsas shown in the diagram to the right. Attaching LCD Options 2. Lay th...
Page 7 - Control Panel; Parts Name and Functions
5 DOWN ( ) button Activates the on-scren menu when the on-screen menu is turned-off.Acts as button to move the highlighted area down to select the adjust-ment with on-screen menu. EXIT button Activates the on-screen menu when the on-screen menu is turned-off. Acts as EXIT button to move to previous ...
Page 8 - Terminal Panel; –continued
6 AUDIO IN 1,2,3 To input audio signal from external equipment such as a computer, VCRor DVD player. AUDIO OUT To output the audio signal from the AUDIO IN 3 jack. VIDEO VIDEO IN connector (BNC and RCA): To input a composite video signal. BNC and RCA are not available at the same time.(Use only one ...
Page 9 - Wireless Remote Control; Sub Picture
7 POWER button Switches the power on/off. * If Power Indicator is not glowing, then no controls will work. INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [DVD/HD], [VIDEO]. AUDIO INPUT button Selects from input audio signal, [AUDIO1], [AUDIO2], [AUDIO3] SIZE button Selects picture s...
Page 10 - Operating Range for the Remote Control; Handling the remote control
8 Point the top of the remote control toward the LCD monitor's remotesensor during button operation.Use the remote control within a distance of about 7 m/23 ft. from thefront of the LCD monitor's remote control sensor and at a hori- zontaland vertical angle of within 30 ° within a distance of about ...
Page 11 - Setup Procedure
9 1. Determine the installation location CAUTION Installing your LCD display must be done by a qualified technician.Contact your dealer for more information. CAUTION MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BYTWO OR MORE PEOPLE. Failure to follow this caution may result ininjury if the LCD ...
Page 12 - Connections; Before making connections:; Wiring Diagram
10 Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram Equipment with digital interface Personal computer LCD monitor (second monitor) DVD playe...
Page 13 - Connecting the LCD Monitor to a PC
11 Connecting your computer to your LCD monitor will enable you to display your computer's screen image.Some video cards may not display an image correctly. • To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the provided RGB signal cable (mini D-sub 15 pin to mini D-sub ...
Page 14 - Connecting to a Macintosh
12 Connecting your Macintosh ® computer to your LCD monitor will enable you to display your computer's screen image. Some video cards or drivers may not display images correctly. • To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the provided RGB signal cable (mini D-sub...
Page 15 - Connecting to a Computer with a Digital Output
13 Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. • The RGB 1 IN connector also accepts a DVI-D cable. Equipment with a digital interface such as a personal computer with RGB output (TMDS) DVI-D connector D...
Page 16 - Connecting to a VCR or Laser Disc Player
14 Connecting your VCR or laser disc player to your LCD monitor will enable you to display your VCR or laser disc player video.Refer to your VCR or laser disc player owner's manual for more information. RCA RCA BNC BNC To VIDEO IN DIN 4 pin DIN 4 pin VCR or Laser disc player To VIDEO OUT To S-VIDEO ...
Page 17 - Connecting to a DVD Player
15 Connecting your DVD player to your LCD monitor will enable you to display your DVD video.Refer to your DVD player owner’s manual for more information. To RGB3 DVD/HD IN BNC x 3 To D VD Component video output To audio right output BNC-to-RCA adapter To audio left output DVD player LCD monitor LCD ...
Page 18 - Connecting to a Stereo Amplifier
16 You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier owner's manual for more information. To audio right output To audio left output VCR or Laser disc player To audio right input To audio left input Amplifier External speaker External speaker LCD monitor Connecting t...
Page 19 - –Power ON and OFF Modes; Using the remote control
17 Basic Operation –Power ON and OFF Modes 1. Pressing the power button. NOTE: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor. 2. Using the remote control NOTE: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD ...
Page 20 - Power Indicator; To view a video source:
18 The LCD monitor follows the VESA approved DPMS Power Manage-ment function.The power management function is an energy saving function thatautomatically reduces the power consumption of the display when thekeyboard or the mouse has not been used for a fixed period of time. Basic Operation –continue...
Page 21 - O n - S c r e e n M e n u C o n t r o l s; – C o m p u t e r
19 O n - S c r e e n M e n u C o n t r o l s – C o m p u t e r PICTURE BRIGHTNESSCONTRASTSHARPNESSBLACK LEVELCOLOR CONTROLCOLOR TEMPERATUREPICTURE RESET BRIGHTNESS SET SET SET Press UP or DOWN button to select sub-menu Press UP or DOWN button to select UP or DOWN button INPUT button Press UP or DOWN...
Page 22 - O n - s c r e e n M e n u C o n t r o l s; – C o m p u t e r c o n t i n u e d
20 O n - s c r e e n M e n u C o n t r o l s – C o m p u t e r c o n t i n u e d H POSITION V POSITION CLOCK CLOCK PHASE H RESOLUTION V RESOLUTION SCREEN RESET H POSITIONV POSITIONCLOCKCLOCK PHASEH RESOLUTIONV RESOLUTIONSCREEN RESET H POSITIONV POSITIONCLOCKCLOCK PHASEH RESOLUTIONV RESOLUTIONSCREEN ...
Page 26 - – D V D & H D c o n t i n u e d
24 O n - s c r e e n M e n u C o n t r o l s – D V D & H D c o n t i n u e d LANGUAGE OSM TIME OFF TIMER SCREEN SAVER CONFIGURATION RESET PIP SIZE PIP AUDIO PIP RESET PIP SIZEPIP AUDIOPIP RESET PIP SIZE LARGE MIDDLE SMALL Sub-Menu Main-Menu Selecting the size of picture inserted at the 'Picture-...
Page 27 - – A V I n p u t
25 O n - s c r e e n M e n u C o n t r o l s – A V I n p u t BRIGHTNESS CONTRAST SHARPNESS TINT COLOR BLACK LEVEL NOISE REDUCTION PICTURE RESET PICTURE Sub-Menu Main-Menu Adjusts the overall image and background screen brightness. Press + button to increase brightness.Press - button to decrease brig...
Page 28 - – A V I n p u t c o n t i n u e d
26 O n - s c r e e n M e n u C o n t r o l s – A V I n p u t c o n t i n u e d PIP SIZE PIP AUDIO PIP RESET PIP SIZEPIP AUDIOPIP RESET PIP SIZE LARGE MIDDLE SMALL Sub-Menu Main-Menu Selecting the size of picture inserted at the 'Picture-in Picture' (PIP) mode.'Large', 'Middle', and 'Small' are avail...
Page 30 - Using the LCD with a Personal Computer (PC)
28 Using the LCD with a Personal Computer (PC) This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer are:• Power ON or OFF• Switching between input signals ConnectionLCD Monitor + PC Note: If your PC (IBM...
Page 31 - Using the LCD with a Personal Computer
29 Using the LCD with a Personal Computer –continued [Example] Turn the power ON ( ' ' is for ASCII code) 4) Operation commands The operation commands execute the basic operation setting of this LCD monitor. It may not operate when changing the signal: HEX21h22h5Fh 72h 31h5Fh 72h 32h5Fh 72h 33h5Fh 7...
Page 32 - Features
30 40” diagonal screen size adds a new option to information display visual offerings. 1280 x 768 resolution allows for crisp text and precise images. No permanent phosphor image burn-in contributes to optimal screen performance and longer monitor life. Wide viewing angle DDC/CI capabilities allow c...
Page 33 - Troubleshooting
31 Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position. • Main Power Switch should be in the ON position (see...
Page 34 - References; Mitsubishi 40” LCD Monitor Customer Ser vice & Support
32 References Mitsubishi 40” LCD Monitor Customer Ser vice & Support Customer Service and Technical Support: (888) 307-0309 Fax: (949) 859-4770 Parts and Accessories/Macintosh Cable Adapter: (888) 307-0309 Customer Service Policies & Processes: http://www.mitsubishi-presentations.com Online ...
Page 35 - Specifications
33 Specifications LCD Module External speaker output inpedance Frequency Pixel Clock Viewable Size Input Signal Power Supply Operational Environment Storage Environment Dimension Weight VESA compatible arm mounting interface Complied Regulatory and Guidelines Power Management Plug & Play Resolut...
Page 36 - Limited Warranty for LCD Monitors; labor expense; retail price of the replacement part or product unit.
34 Limited Warranty for LCD Monitors (Applicable only for Customers who bought and used their products within US Territories) 1. Subject to the terms and conditions in this limited warranty, MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.(“MDEA”) warrants to the original purchaser at retail (the “Purch...
Page 37 - PROPRIETARY NOTICE AND LIABILITY DISCLAIMER; DECLARATION OF CONFORMITY; We hereby declare that the equipment specified above
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of Mitsubishi DigitalElectronics America and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to t...
